Garuda - Garba Rujukan Digital

p-Index From 2019 - 2024

4.744

P-Index

This Author published in this journals

All Journal Majalah Ilmiah MOMENTUM Jurnal Rekayasa Mesin JURNAL DINAMIKA VOKASIONAL TEKNIK MESIN International Journal of New Media Technology Martabe : Jurnal Pengabdian Kepada Masyarakat RESISTOR (Elektronika Kendali Telekomunikasi Tenaga Listrik Komputer) Manutech : Jurnal Teknologi Manufaktur Sprocket : Journal of Mechanical Engineering Dulang: Jurnal Pengabdian Kepada Masyarakat Prosiding SEMNAS INOTEK (Seminar Nasional Inovasi Teknologi) Prosiding Seminar Nasional Inovasi Teknologi Terapan Jurnal Inovasi Teknologi Terapan

Hasdiansah, Hasdiansah

Politeknik Manufaktur Negeri Bangka Belitung

Author-ID : 1992055

Agriculture, Biological Sciences & Forestry Arts Humanities Automotive Engineering Computer Science & IT Control & Systems Engineering Decision Sciences, Operations Research & Management Education Electrical & Electronics Engineering Energy Engineering Industrial & Manufacturing Engineering Materials Science & Nanotechnology Mathematics Mechanical Engineering Social Sciences Transportation Other

Published : 37 Documents Claim Missing Document

Claim Missing Document

Articles

1 2 3 4

Pembuatan Program Aplikasi Pemeliharaan Mesin Terjadual Di Laboratorium Mekanik Polman Negeri Bangka Belitung Hasdiansah Hasdiansah
Manutech : Jurnal Teknologi Manufaktur Vol. 10 No. 02 (2018): Manutech : Jurnal Teknologi Manufaktur
Publisher : Politeknik Manufaktur Negeri Bangka Belitung

Every company wants all its equipment or machinery operating in optimum condition, so that the necessary maintenance activities to fulfill that desire. Management of maintenance activities to be hard to do when the equipment or machines owned by increasingly numerous and complex, and activities increase the number of machines or equipment routinely performed. Therefore needed a system to manage maintenance activities quickly, especially in administration of maintenance of machine or equipment are handled. This program has the ability to manage personal data engines, machinery or equipment maintenance scheduling, managing work instruction sheet, a history of the machine, the data parts, data managing maintenance activities, preventive maintenance and expense reports. System maintenance is made by using a computer-based information system maintenance. In making the program used Microsoft Visual Basic 6.0 and used for the purpose of Microsoft Access database.

Optimasi Parameter Proses 3D Printing FDM Terhadap Akurasi Dimensi Menggunakan Filament Eflex Pristiansyah Pristiansyah; Hasdiansah Hasdiansah; Sugiyarto Sugiyarto
Manutech : Jurnal Teknologi Manufaktur Vol. 11 No. 01 (2019): Manutech: Jurnal Teknologi Manufaktur
Publisher : Politeknik Manufaktur Negeri Bangka Belitung

Fused Deposition Modeling (FDM) is a 3D Printing technique used to print products using filaments as material. The printed product has ideal geometric characteristics if it has meticulous size and perfect shape. One type of material that can be processed using 3D Printing FDM is flexible material. Research in terms of dimensional accuracy has been carried out on PLA and ABS materials. While research using flexible materials is still rarely done. From these problems, we need a study to get the process parameter settings on a 3D Printer machine that is optimal in obtaining dimensional accuracy using flexible materials. The research was carried out using the Prusa model DIY (Do It Yourself) 3D machine with FDM technology. The material used is Eflex type flexible filament with a diameter of 1.75 mm. The process parameters used in this study are flowrate, layer thickness, temperature nozzle, speed printing, overlap, and fan speed. Cuboid test specimens measuring 20 mm × 20 mm × 20 mm. Process parameter optimization using the Taguchi L27 Orthogonal Array method for dimensional accuracy testing. Optimal process parameter values for obtaining X dimension accuracy are 110% flowrate, 0.10 mm layer thickness, 210 °C nozzle temperature, 40 mm/s print speed, 75% overlap, and 50% fan speed. Y dimension is 120% flowrate, layer thickness 0.20 mm, nozzle temperature 230 °C, print speed 30 mm/s, overlap 75%, and fan speed 100%. As well as the Z dimension is 120% flowrate, layer thickness 0.30 mm, nozzle temperature 210 °C, print speed 30 mm/s, overlap 50%, and fan speed 100%.

Pengaruh Tipe Infill dan Temperatur Nozzle terhadap Kekuatan Tarik Produk 3D Printing Filamen Pla+ Esun Z. S. Suzen; Hasdiansah; Yuliyanto
Manutech : Jurnal Teknologi Manufaktur Vol. 12 No. 02 (2020): Manutech: Jurnal Teknologi Manufaktur
Publisher : Politeknik Manufaktur Negeri Bangka Belitung

The increasing technology of the manufacturing industry now makes the industry competition, especially in the field of manufacturing increasingly stringent in developing products with accurate dimensions. The process of getting accurate and precise dimension results is very important in improving the quality of a product to be made. With the development of this technology, the manufacturing industry has begun to develop products with the method of adding materials known as rapid prototyping or layer manufacturing, one of which is technology using 3D printing machines. This research was carried out on a PRUSA 3D Printing FDM model with dimensions of 220 mm x 220 mm x 250 mm and using a nozzle measuring 0.4 mm. The material used is a PLA + filament with a diameter of 1.75 mm with variations in the nozzle temperature parameters (205 ° C, 215 ° C, 225 ° C), layer thickness 0.2, bed temperature 60 ° C, travel speed 100, printing speed 50 , infill type (Grid, Lines, Triangles, Tri Hexagon, Cubic, Cubic Subdivision, Octet, Quarter Qubic, Concentric, Zig Zag, Cross, Cross 3D, Gyroid) which will be determined in Ultimaker Cura 4.4.0 software, resulting in 39 printed sample. The results obtained after testing the highest tensile strength values are found in the 22nd test specimen that is 43.20 MPa with 215 nozzle temperature parameters and Infill Type Concentric, while the lowest tensile strength values are found in the 22nd test specimen which is 24.50 MPa with nozzle temperature parameters 205 ° C and Infill Type Cross.

PENGARUH PARAMETER PROSES SLICING SOFTWARE TERHADAP KEKASARAN PERMUKAAN PRINTING PART MENGGUNAKAN FILAMEN ST-PLA Hasdiansah Hasdiansah; Yudha Bika Pratama; Pristiansyah
Manutech : Jurnal Teknologi Manufaktur Vol. 13 No. 01 (2021): Manutech: Jurnal Teknologi Manufaktur
Publisher : Politeknik Manufaktur Negeri Bangka Belitung

3D printer technology is often said to have a bright future, until now rapid prototyping technology is still developing into technology that is support for fields that support humans for technological advancement in order to bring what is imagined into a more tangible form. The purpose of this study is to determine the effect of parameters on surface roughness and an optimum parameter settings that produce minimal roughness. The taguchi method with an orthigonal matrix L25 (56). Was used in this study. The parameters to be analyzed in this study were layer thickness, printing speed, nozzle temperature, orientation, flow rate and cooling speed. To overcome the noise parameter (disturbance), the process of measuring the surface roughness of the specimen was carried out with 3 replications. Furthermore, the parameters will be analyzed using taguchi method which the smaller characteristic is the better parameter. Based on the results the sequence of parameters that have the greatest and smallest effect on surface roughness on ST-PLA filaments were obtained, namely the thicken layer, flow rate, Nozzle temperature, Printing speed, Cooling speed and Orientation. Setting parameter that produceS minimum roughness value with a value of 3.321 µm is 0.10 mm for coating thickness, 40 mm / s for print speed, 190?C for nozzle temperature, 45? for orientation, 110% for flow rate and 20% for cooling speed.

Optimasi Parameter Proses 3D Printing Terhadap Kuat Tarik Material Filamen PLA + Menggunakan Metode Taguchi Wahyudi Hafizi Pratama; Hasdiansah -; Husman -
SPROCKET JOURNAL OF MECHANICAL ENGINEERING Vol 3 No 1 (2021): Edisi Agustus 2021
Publisher : Program Studi Teknik Mesin, Universitas HKBP Nommensen, Medan

FDM (Fused Deposition Modeling) is one of the methods often usen by researchers in 3D printing technology which is used to print filaments products as a materials, due to the easy technique for 3D printing with relatively low production costs. One of the materials that can be processed in a 3D printing machine ia PLA+. Research in tensile testing has been done on PLA and ABS filaments. Meanwhile, tensile testing using PLA+ filaments is still rarely done. From these problems, research is needed to get the optimal process parameters on the 3D printing machine to get the highest tensile strenght value using PLA+ filaments. This research uses the taguchi method, carried out on a PRUSA area model FDM 3D Printing machine with dimensions of 300mm x 300mm x 350mm using a nozzle size of 0.4mm. The material used is PLA + Esun filament with a diameter of 1.75 mm with a variety of printing speed parameters (30 mm/s, 35 mm/s, 40 mm/s, 45 mm/s, 50 mm/s), nozzle temperature (1950C, 2000C, 2050C, 2100C, 2150C), layer thickness (0.10mm, 0.15mm, 0.20mm, 0.25mm, 0.30mm), cooling speed (20%, 40%, 60%, 80%, 100%), orientation (00, 300, 450, 600,900) which will be determined in ideamaker 3.6.1 to produce 75 printed samples. This research aims to determine the optimal tensile strength value. From the research results there is an optimal tensile strength value, namely in experiment 10 with the parameter values of printing speed (35 mm/s), Nozzle Tenperature (2150C), Layer Thickness (0.10mm), Cooling speed (20%), and Orientation (450). with a tensile strength value of 48.1 MPa from 3 replications.

Pengaruh Media, Temperatur Dan Waktu Perlakuan Annealing Pada Spesimen Standar ASTM D638 Type IV Menggunakan Filamen ST PLA Yulian Subakti; Hasdiansah -; Zaldy Kurniawan
SPROCKET JOURNAL OF MECHANICAL ENGINEERING Vol 3 No 1 (2021): Edisi Agustus 2021
Publisher : Program Studi Teknik Mesin, Universitas HKBP Nommensen, Medan

Fused Deposition Modeling (FDM) is a technique of 3D Printing machines that is popularly used to print products. The printed product certainly has the ideal tensile strength characteristics if it has a precise size and good shape according to the standard. One of the materials that can be processed in a 3D printing machine is ST PLA. Research in terms of tensile testing has been carried out on PLA/ABS materials. However, tensile testing with annealing process using ST PLA filament is still very rarely done. From these problems, it is necessary to research to obtain optimal process parameters on 3D printing machines, to obtain the highest tensile strength from the annealing process using ST PLA material. This research was conducted using a 3D printer DIY Prusa model with a printing area of XYZ, 300 mm x 300 mm x 350 mm. The material used is ST PLA filament with a diameter of 1.75 mm in green. The process parameters in this research are layer thickness, nozzle temperature and flow rate. For annealing media use beach sand, coffee and wheat. The shape of the test specimen follows the ASTM D638 type IV standard. As for the design of the process parameters using the Taguchi L9 method (33). The process parameter values that produce the highest tensile strength without annealing are layer thickness 0.3 mm, nozzle temperature 205oC, and flow rate 100%. The annealing process parameters that produce the highest tensile strength are annealing time of 15 minutes, oven temperature of 110oC, for annealing media using coffee.

Pengaruh Orientasi Posisi Printing Z Axis Mesin 3D Printing Terhadap Kuat Tarik Menggunakan Filamen Super Tough PLA Hasdiansah Hasdiansah; Pristiansyah Pristiansyah; Zaldy S Suzen
Manutech : Jurnal Teknologi Manufaktur Vol. 14 No. 01 (2022): Manutech: Jurnal Teknologi Manufaktur
Publisher : Politeknik Manufaktur Negeri Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33504/manutech.v14i01.197

The manufacture of the main parts of a mechanical system can use 3D Printing technology. One of the cheapest 3D printing technologies is using Fused Deposition Modeling (FDM). There are many materials that can be printed with FDM technology such as PLA, Super Tough PLA, ABS, Nylon, PETG, and others. The more expensive FDM technology, the more types of filaments that the machine can print. The ASTM D638 Type IV standard tensile test specimen is often used by researchers to see the tensile strength of printed products. This study uses several process parameters that are set in the slicing software which are then in the form of G-Code and stored in an SD card and processed on the FDM 3D Printer machine. The ST-PLA filament used in this study is 1.75 mm in diameter and uses a 0.4 mm nozzle. The process parameters set in the slicing software are as follows nozzle temperature 195°C, bed temperature 60°C, travel speed 120 mm/s, default printing speed 50 mm/s, layer thickness 0.3 mm, internal fill pattern wiggle, external fill pattern concentric, bottom layer 5, top layer 5, and perimeter 5. Variables that change in the orientation of the print position or Z Rotate Degree 0°, 5°, 10°, 15°, 20°, 25°, 30°, 35°, 40°, 45°, 50°, 55°, 60°, 65°, 70°, 75°, 80°, 85°, and 90°. The highest value of the tensile strength test results for the standard ASTM D638 Type IV test specimen was obtained in experiment number twelve (12) which was 61.10 Mpa with a rotating angle of the Z axis of 55° seven (7) which is 37.50 MPa. The influence of the orientation of the Z-axis rotation angle on the required filament weight in the tensile test specimen printing process is not significant, which is only 0.01 gram.

Analisis Pengaruh Parameter Infill Pattern dan Nozzle Temperature terhadap tensile strength Filamen PLA PRO Zaldy S. Suzen; Riskullah Dirga Trisaplin; Hasdiansah Hasdiansah
Manutech : Jurnal Teknologi Manufaktur Vol. 14 No. 01 (2022): Manutech: Jurnal Teknologi Manufaktur
Publisher : Politeknik Manufaktur Negeri Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33504/manutech.v14i01.208

3D Printing is part of Rapid Prototyping technology, where the printing process converts a 3D design into a solid object, can be held and has volume, the formation is done by placing the filament layer by layer. The purpose of this study was to determine the effect of the process parameters used, to determine the highest and lowest tensile strength values ??and to determine the eligible parameters for car dashboard production. The method in this study using the factorial method multiplied by 15 types of infill and 3 temperature levels so as to create a total of 45 specimens, then replicated 3 times to make 135 samples of specimens, the process parameters used were 15 types of infill and 3 levels of nozzle temperature that were printed in a vertical orientation. The highest tensile strength value is 43.9 MPa with the parameter (infill pattern) 3D honeycomb, nozzle temperature 210?C, and the lowest tensile strength value is 14.7 MPa with the parameter (infill pattern) archimedean chord, nozzle temperature 220?C. The final result of the research shows that there is an influence between parameters on the value of tensile strength and recommends several parameters that can be used to produce car dashboards.

Pengaruh Parameter Proses Pada 3D Printing FDM Terhadap Kekuatan Tarik Filament ABS CCTREE Pristiansyah Pristiansyah; Hasdiansah Hasdiansah; Ade Ferdiansyah
Manutech : Jurnal Teknologi Manufaktur Vol. 14 No. 01 (2022): Manutech: Jurnal Teknologi Manufaktur
Publisher : Politeknik Manufaktur Negeri Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33504/manutech.v14i01.210

3D printing technology is one of the new breakthroughs in the world of manufacturing. This principle uses layered modeling, which directly converts 3D data from computer-aided design (CAD) into physical prototypes. Additive Manufacturing technology itself has attracted a lot of interest as research material from industry to academia because it can provide manufacturing solutions that produce products with complex designs and reduce time without compromising print quality. Currently, the Fused Deposition Modeling (FDM) process is the most widely used process in 3D printing due to its ease of operation, low operating costs and environmental convenience. This study uses the Taguchi method with quality characteristics the bigger the better. The experimental design used is L27 OA by analyzing the Signal to Noise Ratio SNR. The method is based on the principle of tensile strength, to determine the process parameters that greatly affect the ABS CCTREE filament. The process parameters used in this research are nozzle temperature, layer thickness, temperature based plate, print speed and infill pattern. The order of the most influential parameters in a row is layer thickness of 40,74%, print speed of 9,40%, nozzle temperature of 5,69%, temperature based plate of 5,56% and infill pattern of 4,36%.

Optimization of Process Variables in 3D Printing on Dimensional Accuracy Using Nylon Filaments Hasdiansah Hasdiansah
IJNMT (International Journal of New Media Technology) Vol 9 No 1 (2022): IJNMT (International Journal of New Media Technology)
Publisher : Universitas Multimedia Nusantara

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31937/ijnmt.v9i1.2398

Abstract—Manufacturing process over the past 50 years has led to very rapid and continuous progress in the manufacturing industry, one of the manufacturing processes that has progressed is 3D printing technology. The type of filament used in this research is nylon filament. This study aims to obtain optimal process parameters for dimensional accuracy. The method used in this study is the Taguchi L27 OA method. The process parameters used are nozzle temperature, bad temperature, layer thickness, flowrate, printing speed, overlap, infill density, infill speed, wall thickness. The results showed that the optimal process parameters are nozzle temperature(256°C), bad temperature(96°C), layer thickness(0.2mm), flowrate(90%), printing speed(30mm/s), overlap (10%), Keywords: 3D printing; Accuracy; Dimensions; Nylon; Parameter;

Co-Authors Ade Ferdiansyah Adhe Anggry Aldi Pratama Arriyani, Yang Fitri Berlian Adinata Intani Adinata Boi Rollastin Clara Lavita Angelina Dedy Ramdhani Harahap Delfiana Octora Devaned Parlindungan Dherry Riski Andhika Diviya Arsieka Putri Dwi Ranti Safitri Erwansyah Erwansyah Fadzila Septia Falah Yudha Hanafi Feriadi, Indra Fikri Fikri Hairullah Hairullah Herianto Herianto Husman Husman Inne Dwi Agustini Irfan Fadhil Masdani Masdani Medeline Citra Vanessa Muhammad Haritsah Amrullah Nanda Pranandita Naufal Rafiq Muhammad Nori Farandi Nori Pristiansyah Pristiansyah Redy Redy Reza Dwi Putra Putra Riskullah Dirga Trisaplin Robert Napitupulu Subkhan Subkhan Sugianto Sugianto Sugianto Sugiyarto Sugiyarto Sugiyarto Sugiyarto Sugiyarto Sugiyarto Suzen, Zaldy Sirwansyah Suzen, Zaldy Sirwansyah Ummi Khalsum Wahyudi Hafizi Pratama Wahyudi Hafizi Pratama Yogie Pranata Yudha Bika Pratama Yuli Dharta Yulian Subakti Yulian Subakti M.yusuf Yuliyanto Z. S. Suzen Zaldy Kurniawan Zaldy Kurniawan Zaldy S Suzen Zaldy S. Suzen Zanu Saputra Zulfitriyanto, Zulfitriyanto

Title

Found 37 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 37 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 37 Documents
Search