Claim Missing Document
Check
Articles

Found 1 Documents
Search

INVESTIGASI ALIRAN PADA THRUSTER ROV (REMOTELY OPERATED VEHICLE) MENGGUNAKAN METODE CFD Raynaldo, Kevin; Darmawan, Steven; Halim, Agus
Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan Vol 5, No 2 (2021): Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan
Publisher : Universitas Tarumanagara

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24912/jmstkik.v5i2.9986

Abstract

Remotely Operated Vehicle (ROV) is an underwater robot that designed by UNTAR Robotics Team and has been competed in Singapore Robotics Games (SRG) 2020. Evaluation that conducted from the competition is the need of optimization in thrust and maneuverability so it can move more flexible and stable. Based on the problem, investigation of thruster’s configuration by adding kort nozzle to existing propeller is implemented to increase thrust and performance. Consideration in using open water characteristics for analysis is elaborated in this investigation. The existing propeller has 3-blade with 35 mm diameter; 1,4 pitch diameter ratio; and 0,511 expanded blade area ratio which is used as thruster of ROV 2020. It utilizes CFD approach in ANSYS CFX 2020 R1 software with moving reference frame (MRF) method. Meanwhile, general mesh or unstructured mesh arrangements is used as computational mesh with 165.201 nodes. The MRF implements frozen rotor concept as frame change/mixing to observe fluid flow. The CFD with shear stress transport (SST) k-omega model is conducted. The simulation is done at 300 rpm and J = 0,473 for ROV’s operating condition. The result shows that thruster equipped by kort nozzle is able to increase the thrust for 2,253% and reduce the propeller required torque for 6,633%. Furthermore, the configuration can also reduce wake phenomenon as result of rotating propeller which represents better maneuver chance. Keywords: ROV, kort nozzle, open water characteristics, CFD, performanceAbstrakRemotely Operated Vehicle (ROV) merupakan sebuah underwater robot yang didesain oleh Tim Robotik UNTAR dan telah berkompetisi dalam Singapore Robotics Games (SRG) 2020. Evaluasi yang dilakukan terhadap hasil kompetisi tersebut adalah terdapat kebutuhan untuk melakukan optimasi dalam thrust dan kemampuan bermanuver sehingga ROV dapat bergerak lebih fleksibel dan stabil. Berdasarkan permasalahan tersebut, investigasi pada konfigurasi thruster dengan penambahan kort nozzle terhadap existing propeller diimplementasikan untuk meningkatkan thrust dan unjuk kerja. Pertimbangan dalam penggunaan open water characteristics sebagai dasar analisis diuraikan dalam investigasi ini. Existing propeller memiliki 3 buah blade dengan diameter 35 mm; pitch diameter ratio sebesar 1,4; dan expanded blade area ratio sebesar 0,511 yang mana digunakan sebagai thruster ROV 2020. Investigasi tersebut menggunakan pendekatan CFD dalam software ANSYS CFX 2020 R1 dengan metode moving reference frame (MRF). Sementara itu, computational mesh menggunakan jenis general mesh atau unstructured mesh arrangements dengan total 165.201 nodes. MRF mengimplementasikan konsep frozen rotor sebagai frame change/mixing untuk mengamati aliran fluida. CFD dilakukan dengan menggunakan model shear stress transport (SST) k-omega. Simulasi tersebut dilakukan pada 300 rpm dan J = 0,473 sebagai operating condition ROV. Hasil simulasi menunjukkan bahwa thruster yang dilengkapi kort nozzle mampu meningkatkan thrust sebesar 2,253% dan mengurangi torsi yang dibutuhkan propeller sebesar 6,633%. Lebih lanjut, konfigurasi ini juga dapat mengurangi fenomena wake sebagai akibat dari putaran propeller yang mana merepresentasikan peluang manuver yang lebih baik.