Garuda - Garba Rujukan Digital

Perubahan Distribusi Ukuran Partikel Tepung Iles-Iles Hasil Pengolahan dengan Metode Penggilingan Bertingkat Sukrisno Widyotomo; Hadi K. Purwadaria; Atjeng M. Syarief; Sri Mulato
agriTECH Vol 24, No 2 (2004)
Publisher : Faculty of Agricultural Technology, Universitas Gadjah Mada, Yogyakarta, Indonesia

The objectives of this research were to observe the distribution particle sizes change of konjac flour by dry milling method. The milling process of konjac flour included the milling by rotary cutter, burr mill, and conical ball mill. The particle size and the size distribution were determined by sieving, microscopic, and scanning electron microscope methods. The data obtained by using the microscopic method indicated the smallest geometric mean particles size, while data from the sieve method indicated the largest geometric mean size. The pictures obtained by using scanning electron microscope method showed the particles has broken after milling process by conical ball mill. The results indicated that the series of milling process decreased the geometric mean diameter, the finenes modulus, and the uniformity index of konjac flour particles.

Pengaruh Lama Perendaman Buah dan Fermentasi terhadap Warna Kulit Tanduk dan Citarasa Kopi Robusta Khalimatus Sa'diyah; Usman Ahmad; Sukrisno Widyotomo; Yusianto Yusianto
Jurnal Tanaman Industri dan Penyegar Vol 6, No 1 (2019): Jurnal Tanaman Industri dan Penyegar
Publisher : Pusat Penelitian dan Pengembangan Perkebunan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21082/jtidp.v6n1.2019.p33-40

Pulping and fermentation of coffee cherry determine the quality of green beans and coffee flavors. Delay in pulping will cause the slime stick to the hull skin hence decreasing the bean quality and flavor. The objective of this study was to examine the effect of soaking before pulping and fermentation time to the color of coffee hull skin and the cup quality. The research was carried out at the experimental station of Indonesian Coffee and Cocoa Research Institute in Malang Regency (ICCRI) and ICCRI laboratory in Jember Regency from July 2018 to January 2019. Experiments used factorial completely randomized design. The first factor was cherry soaking duration (0, 24, 48, and 72 hours) and the second factor was fermentation duration (0, 24, and 48 hours) and then combined into 12 treatments, with three replications. Ten kilograms of coffee cherries were soaked prior to pulping then fermented in a plastic bag and added with Lactobacillus casei 2,5 x 107 cfu/ml as starter. Parameters observed were color of hull skin (L value, a*, dan b*) and the cup quality. The results showed that soaking the cherry decreased the green beans quality which is indicated by less brightness (L), high a* value, and decreasing b* value of hull skin color. While the fermentation treatment can increase the value of L, decrease the a* value, and increase the b* value. The interaction of treatment of soaking and fermentation time significantly affected the lightnessl a* and b* value. Soaking and fermentation treatments did not significantly affect to the flavor, salt/acid, balance, and total score of coffee flavor. Soaking is not recommended for more than 48 hours and fermentation should be carried out 48 hours.

Quality and Flavor Profiles of Arabica Coffee Processed by Some Fermentation Treatments: Temperature, Containers, and Fermentation Agents Addition Yusianto .; Sukrisno Widyotomo
Pelita Perkebunan (a Coffee and Cocoa Research Journal) Vol 29 No 3 (2013)
Publisher : Indonesian Coffee and Cocoa Research Institute

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22302/iccri.jur.pelitaperkebunan.v29i3.14

Coffee fermentation is a step of wet processing. In fact, some microorganisms naturally exist on the surface of coffee cherry. Using a starter culture of microorganisms may change equilibrium of microorganism population. Among some safe fermentation agents are present in “ragi tape” (yeast), “ragi tempe”, and fermented milk. A fermentor machine equipped with eating-control and stirrer had been designed, and tested before. Some treatments investigated were fermentation containers (fermentor machine and plastic sacks); fermentation agents (fresh cage-luwakcoffee, “ragi tape”, “ragi tempe”, and fermented milk); temperature of fermentation (room, 30 C, 35 C, and 40 C); and duration of fermentation (6, 12, and 18 hours). The experiment were replicated three times. Wet-coffee parchments were washed and sundried until moisture content reached 12%. The dried parchment was hulled and examined for the bean quality and flavors. The experiment indicated that 40 C fermentation in fermentor machine resulted in higher content of “full sour defect”. Fermentation agents significanly influenced bean size. Temperature treatment significanly influenced bulk density and bean size. The best flavor profile was obtained from fermentation in plastic sack at ambient temperature. Bacteria of fermented milk and “fresh luwak coffee” as fermentation agents resulted up to excellent flavor. Twelve hours fermentation produced best flavor of Arabica coffee compared to 6 and 18 hours. Key words: Arabica coffee, fermentation, flavour, fermentation agents

Performance of Rotary Cutter Type Breaking Machine for Breakingand Deshelling Cocoa Roasted Beans Sukrisno Widyotomo; Sri Mulato; Edi Suharyanto
Pelita Perkebunan (a Coffee and Cocoa Research Journal) Vol 21 No 3 (2005)
Publisher : Indonesian Coffee and Cocoa Research Institute

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22302/iccri.jur.pelitaperkebunan.v21i3.21

Conversion of cocoa beans to chocolate product is, therefore, one of the promising alternatives to increase the value added of dried cocoa beans. On the other hand, the development of chocolate industry requires an appropriate technology that is not available yet for small or medium scale of business. Breaking and deshelling cocoa roasted beans is one important steps in cocoa processing to ascertain good chocolate quality. The aim of this research is to study performance of rotary cutter type breaking machine for breaking and deshelling cocoa roasted beans. Indonesian Coffee and Cocoa Research Institute has designed and tested a rotary cutter type breaking machine for breaking and deshelling cocoa roasted beans. Breaker unit has rotated by ½ HP power, single phase, 110/220 V and 1440 rpm. Transmission system that use for rotating breaker unit is pulley and single V belt. Centrifugal blower as separator unit between cotyledon and shell has specification 0.5 m 3 /min air flow, 780 Pa, 370 W, and 220 V. Field tests showed that the optimum capacity of the machine was 268 kg/h with 500 rpm speed of rotary cutter, 2,8 m/s separator air flow, and power require was 833 W. Percentage product in outlet 1 and 2 were 94.5% and 5.5%. Particle distribution from outlet 1 was 92% as cotyledon, 8% as shell in cotyledon and on outlet 2 was 97% as shell, 3% as cotyledon in shell. Key words:cocoa, breaking, rotary cutter, quality.

Optimation of Temperature and Duration of Cocoa Beans Roasting in a CylindricalRoaster Misnwai Jati; Sukrisno Widyotomo; Awad Sewed; Sugiyono .
Pelita Perkebunan (a Coffee and Cocoa Research Journal) Vol 21 No 3 (2005)
Publisher : Indonesian Coffee and Cocoa Research Institute

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22302/iccri.jur.pelitaperkebunan.v21i3.23

A small scale cylindrical type cocoa roaster has been designed to improve Indonesian mallholder income and commence utilization of cocoa-base products. Capacity of the roaster was at 15 kg dried cocoa beans. Operating condition of the instrument in terms of temperature and duration of roasting for cocoa powder production has been optimized by using Response Surface Methodology in the range of 110–140 C for the former and 20–60 minute for the latter. Variable of the study were temperature profile, peroxide value of cocoa butter, color and sensory properties of the resultant cocoa powder and microbial con tamination. Result of the study showed that cocoa bean’s temperature at the first 2–8 minute roasting was 30–50 C, before increased as high 10 C per minute to the adjusted temperature. Temperature and duration of roasting influenced interactively on peroxide value of cocoa butter, color and sensory properties of the resultant cocoa powder. An optimum roasting for cocoa powder preparation was obtained at temperature of 140 C and roasting time of 20 minute. Roasting treatment significantly reduced number of microbe in total plate count, however most probable number (MPN) of coliform in term of Escherichia coli was not detected. Key words : Cocoa bean, cocoa powder, cocoa butter, roasting, small scale cylindrical roaster, sensory properties, Escherichia coli.

Optimizing of a Horizontal Cylinder Type Cocoa Roaster for Dried Cocoa Cotyledon Roasting Sukrisno Widyotomo; Sri Mulato; Edi Suharyanto
Pelita Perkebunan (a Coffee and Cocoa Research Journal) Vol 22 No 2 (2006)
Publisher : Indonesian Coffee and Cocoa Research Institute

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22302/iccri.jur.pelitaperkebunan.v22i2.34

The secondary process of cocoa is one of the promising alternatives to increase the value added of dried cocoa beans. One the other hand, the development for secondary cocoa process requires an appropriate technology that is not available yet for small or medium scale business. Cocoa roaster is a basic equipment to produce good and competitive secondary cocoa products for chocolate industry. The Indonesian Coffee and Cocoa Research Institute has, therefore, designed and tested a horizontal cylinder type roaster for drying cocoa cotyledon. The cylinder has 405 mm diameter, 520 mm long and is rotated by a 1 HP (0.75 kW), 220 V, single phase and 1400 rpm electric motor. Assisted with a gear reducer, the final cylinder rotation is adjusted at approximately 6 rpm. The heat for roasting process is generated from kerosene burner. At the end of roasting, the roasted beans are cooled down by ambient air inside a cooling platform by natural air flow. The raw material used in this optimizing test was dried fine cocoa cotyledon. Field tests showed that the optimum performance of the roaster was 7 kg dried fine cocoa cotyledon loaded with roasting temperature 120 oC and 25.57 kg/h optimum capacity. The organoleptic test showed that score of aromatic, flavour, acidity, bitterness, astringency and burnt were 4.8, 5.2, 5.4, 5.2, 4.8 and 0.8 with 10 scale, also 4.2 with 5 scale for likely. The roasting time was 15—25 minutes to get 2.5—3% final water content depend on roasting temperature and cocoa cotyledon loaded. Key words: cocoa, roasting, horizontal cylinder, quality.

Performance of Disk Mill Type Mechanical Grinder for Size Reducing Process of Robusta Roasted Beans Sri Mulato; Sukrisno widyotomo; Hadi Karia Purwadaria
Pelita Perkebunan (a Coffee and Cocoa Research Journal) Vol 23 No 3 (2007)
Publisher : Indonesian Coffee and Cocoa Research Institute

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22302/iccri.jur.pelitaperkebunan.v23i3.39

One of improtant steps in secondary coffee processing that influence on final product quality such as consistency and uniformity is milling process. Usually, Indonesian smallholder used "lumpang" for milling coffee roasted beans to coffee powder product which caused the final product not uniformed and consistent, and low productivity. Milling process of coffee roasted beans can be done by disk mill type mechanical grinder which is used by smallholder for milling several cereals. Indonesian Coffee and Cocoa Research Institute have developed disk mill type grinding machine for milling coffee roasted beans. Objective of this research is to find performance of disk mill type grinding machine for size reducing process of Robusta roasted beans from several size dried beans and roasting level treatments. Robusta dried beans which are taken from dry processing method have 13—14% moisture content (wet basis), 680—685 kg/m3 density, and classified in 3 sizes level. The result showed that the disk mill type of grinding machine could be used for milling Robusta roasted beans. Machine hascapacity 31—54 kg/h on 5,310—5,610 rpm axle rotation and depend on roasting level. Other technical parameters were 91—98% process efficientcy, 19—31 ml/ kg fuel consumption, 0.3—1% slips, 50—55% particles had diameter less than 230 mesh and 38—44% particles had diameter bigger than 100 mesh, 32—38% lightness was increased, 0.6—12.6% density was decreased, and solubility of coffee powder between 28—30%. Cost milling process per kilogram of Robusta roasted beans which light roast on capacity 30 kg/hour was Rp362.9. Key words : Coffee roasted, Robusta, disk mill, mechanical grinder, size reduction.

Title

Found 7 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 7 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 7 Documents
Search