Claim Missing Document
Check
Articles

Found 5 Documents
Search

SINTESIS DAN KARAKTERISASI KOMPOSIT KARET ALAM/SELULOSA DENGAN VARIASI JENIS SELULOSA Handayani, Hani; Cifriadi, Adi; Handayani, Aniek Sri; Chalid, Mochammad; Herlina, Riana; Savetlana, Shirley
Jurnal Penelitian Karet JPK : Volume 36, Nomor 2, Tahun 2018
Publisher : Pusat Penelitian Karet - PT. Riset Perkebunan Nusantara

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22302/ppk.jpk.v36i2.582

Abstract

Karet alam dan selulosa merupakan dua material yang memiliki kompatibilitas yang sangat berbeda. Karet alam bersifat nonpolar sedangkan selulosa bersifat polar. Kombinasi antara karet alam dengan selulosa diharapkan akan menjadi komposit dengan kekuatan yang lebih tinggi. Konsep penguatan bahan polimer, seperti karet alam dengan bahan pengisi selulosa, terjadi akibat peningkatan interaksi karet-bahan pengisi. Penelitian ini bertujuan untuk mengetahui pengaruh beberapa jenis selulosa terhadap sifat fisik komposit yang dihasilkannya. Sebanyak tiga jenis selulosa digunakan dalam penelitian ini yaitu serbuk selulosa dari tandan kosong kelapa sawit, selulosa onggok dari limbah pati singkong, dan CMC (Carboxy Methyl Cellulose). Bahan selulosa digiling dalam mesin giling terbuka bersama dengan karet alam dan bahan-bahan lainnya menggunakan dua jenis bahan penyambung (coupling agent) yaitu hexamine/resorcinol dan anhidrida maleat. Hasil penelitian menunjukkan bahwa CMC memberikan hasil sifat fisik yang relatif lebih baik dibandingkan dengan dua jenis selulosa lainnya terutama dalam hal kuat tarik, pampatan tetap, dan ketahanan pantul komposit yang dihasilkannya. Sementara itu hexamine/ resorcinol lebih kompatibel digunakan sebagai bahan penyambung dibandingkan anhidrida maleat. 
Analysis of Economic Potential of Lebak Indonesia Regency Based on Leading Sector Puspita, Mutiara Eka; Handayani, Aniek Sri; Ratnawati, Ratnawati; Medtry, Medtry
Budapest International Research and Critics Institute (BIRCI-Journal): Humanities and Social Sciences Vol 5, No 1 (2022): Budapest International Research and Critics Institute February
Publisher : Budapest International Research and Critics University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33258/birci.v5i1.4166

Abstract

Lebak Regency has the largest area in Banten Province, Indonesia with an area of 3426.56 km or 35.46% of the total area of Banten province. With this landscape, Lebak has development potential which is indicated by the existence of national strategic projects such as the construction of the Serang-Panimbang toll road, the construction of the Karian dam which is the third largest in Indonesia and the development of the new city of Maja. The realization of investment in Lebak Regency for 2 consecutive years in 2019 and 2020 has always been above the target. This is inseparable from the strong commitment of the Lebak Regency Government to improve a conducive investment climate. An analysis of the economic potential is needed to determine the comparative advantage of the location so that the promotion strategy to bring in investment can run effectively. From the results of the comparison of the Gross Regional Domestic Product (GRDP) of Lebak Regency with the Provincial Gross Regional Domestic Product, it was found that the Location Quotient (LQ) value was relatively stable and consistent in 2020 (LQ value> 1), namely the agriculture, forestry and fisheries sub-sectors (3, 30), mining and quarrying sub-sector (6.64), provision of accommodation and food and drink (1.47), government administration, defense and compulsory social security (2.00), educational services (1.38), and other services ( 1.15).
Synthesis and Characterization of Polymeric Surfactant from Palm Oil Methyl Ester and Vinyl Acetate for Chemical Flooding Agam Duma Kalista Wibowo; Pina Tiani; Lisa Aditya; Aniek Sri Handayani; Marcelinus Christwardana
Reaktor Volume 21 No. 2 June 2021
Publisher : Dept. of Chemical Engineering, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (505.698 KB) | DOI: 10.14710/reaktor.21.2.65-73

Abstract

Surfactants for enhanced oil recovery are generally made from non-renewable petroleum sulfonates and their prices are relatively expensive, so it is necessary to synthesis the bio-based surfactants that are renewable and ecofriendly. The surfactant solution can reduce the interfacial tension (IFT) between oil and water while vinyl acetate monomer has an ability to increase the viscosity as a mobility control. Therefore, polymeric surfactant has both combination properties in reducing the oil/water IFT and increasing the viscosity of the aqueous solution simultaneously. Based on the study, the Critical Micelle Concentration (CMC) of Polymeric Surfactant was at 0.5% concentration with an IFT of 7.72x10-2 mN/m. The best mole ratio of methyl ester sulfonate to vinyl acetate for polymeric surfactant synthesis was 1:0.5 with an IFT of 6.7x10-3 mN/m. Characterization of the product using FTIR and HNMR has proven the creation of polymeric surfactant. Based on the wettability alteration study, it confirmed that the product has an ability to alter from the initial oil-wet to water-wet quartz surface. In conclusion, the polymeric surfactant has ultralow IFT and could be an alternative surfactant for chemical flooding because the IFT value met with the required standard for chemical flooding ranges from 10-2 to 10-3 mN/m.Keywords: Enhanced Oil recovery, Interfacial Tension, Methyl Ester Sulfonate, Polymeric surfactant, vinyl acetate
SINTESIS DAN KARAKTERISASI KOMPOSIT KARET ALAM/SELULOSA DENGAN VARIASI JENIS SELULOSA Hani Handayani; Adi Cifriadi; Aniek Sri Handayani; Mochammad Chalid; Riana Herlina; Shirley Savetlana
Jurnal Penelitian Karet JPK : Volume 36, Nomor 2, Tahun 2018
Publisher : Pusat Penelitian Karet - PT. Riset Perkebunan Nusantara

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22302/ppk.jpk.v36i2.582

Abstract

Karet alam dan selulosa merupakan dua material yang memiliki kompatibilitas yang sangat berbeda. Karet alam bersifat nonpolar sedangkan selulosa bersifat polar. Kombinasi antara karet alam dengan selulosa diharapkan akan menjadi komposit dengan kekuatan yang lebih tinggi. Konsep penguatan bahan polimer, seperti karet alam dengan bahan pengisi selulosa, terjadi akibat peningkatan interaksi karet-bahan pengisi. Penelitian ini bertujuan untuk mengetahui pengaruh beberapa jenis selulosa terhadap sifat fisik komposit yang dihasilkannya. Sebanyak tiga jenis selulosa digunakan dalam penelitian ini yaitu serbuk selulosa dari tandan kosong kelapa sawit, selulosa onggok dari limbah pati singkong, dan CMC (Carboxy Methyl Cellulose). Bahan selulosa digiling dalam mesin giling terbuka bersama dengan karet alam dan bahan-bahan lainnya menggunakan dua jenis bahan penyambung (coupling agent) yaitu hexamine/resorcinol dan anhidrida maleat. Hasil penelitian menunjukkan bahwa CMC memberikan hasil sifat fisik yang relatif lebih baik dibandingkan dengan dua jenis selulosa lainnya terutama dalam hal kuat tarik, pampatan tetap, dan ketahanan pantul komposit yang dihasilkannya. Sementara itu hexamine/ resorcinol lebih kompatibel digunakan sebagai bahan penyambung dibandingkan anhidrida maleat. 
Persepsi Pelaku Usaha terhadap Kebijakan Insentif dan Kemudahan Berusaha di Kabupaten Lebak Mutiara Eka Puspita; Aniek Sri Handayani; Ratnawati Ratnawati
Syntax Literate Jurnal Ilmiah Indonesia
Publisher : CV. Ridwan Publisher

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (377.897 KB) | DOI: 10.36418/syntax-literate.v7i2.6173

Abstract

Investasi yang berkelanjutan merupakan salah satu program yang tercantum padafase awal Rencana Pembangunan Jangka Menengah Nasional (RPJMN) 2020-2024.Target utama pada RPJMN 2020-2024 adalah Indonesia menjadi salah satu negaraupper-middle income dengan pertumbuhan ekonomi diharapkan meningkat dengannilai rarta-rata 5,7-6,0 persen. Untuk merealisasikan hal tersebut, perlu dukungandari pemerintah daerah untuk meningkatkan investasi sehingga disahkan PeraturanPemerintah No 24 tahun 2019 tentang Pemberian Insentif dan Kemudahan Investasidi daerah. Setiap pemerintah daerah dapat menerapkan jenis kebijakan insentif dankemudahan investasi dengan menyesuaikan karakteristik daearah. Analisiskebijakan insentif dan kemudahan investasi dari sisi pelaku usaha perlu dilakukanagar kebijakan insentif dan kemudahan investasi yang diterapkan dapat tepatsasaran serta efektif dalam mendorong pertumbuhan investasi daerah. Dengan mixmethod melalui focus group discussion dan penyebaran kuesioner, diperolehperingkat jenis kebijakan insentif dan kemudahn berusaha yang dapat diterapkan diKabupaten Lebak.