Hartati Hartati
Department of Chemistry, Faculty of Science and Technology, Universitas Airlangga, Kampus C Unair, Jl. Mulyorejo, Surabaya, 60115

Published : 9 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 9 Documents
Search

Optimization of Pretreatment and Hydrothermal Process of Na-X Zeolite from Kaolin and Metakaolin Hartati Hartati; Satya Candra Wibawa Sakti; Putri Bintang Dea Firda; Chabibah Saidah
Jurnal Kimia Valensi Jurnal Kimia VALENSI Volume 5, No. 2, November 2019
Publisher : Syarif Hidayatullah State Islamic University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1341.369 KB) | DOI: 10.15408/jkv.v5i2.11326

Abstract

Synthesis of Na-X zeolite was conducted from kaolin and metakaolin. Synthesis varied in its pretreatment method and hydrothermal conditions. The pretreatment methods used were: conventional alkaline, alkaline fusion and conventional fluoride. Hydrothermal conditions for the experiments were gradual temperature 40 oC  (6h), 60 oC (6h), 80 oC (12h), and constant temperature 80 oC for 24 h, 100 oC for 24 and 100 oC for 48 h. Synthesized products were characterized by X-Ray Diffraction (XRD), Fourier Transform InfraRed (FTIR), Scanning Electron Microscopy-Energy Dispersive X-Ray (SEM-EDX), and N2 Isotherm Adsorption/Desorption method. The result showed that pre-treatment by conventional fluoride could not produce Na-X zeolite, synthesis by conventional alkaline and alkaline fusion with hydrothermal at 100 oC (48h), 100 oC (24 h), and gradual temperature produce Na-X zeolite with Na-P1 or Na-A zeolite as impurities, while synthesis from metakaolin by conventional alkaline with hydrothermal at 80 oC for 24 hours produced pure Na-X zeolite. Na-X zeolite and NaP1 zeolite with hierarchical pores were synthesized through alkali fusion with hydrothermal at 100 oC for 24 hours.  
SUHU DAN WAKTU HIDROTERMAL DALAM SINTESIS ZSM-5 DARI METAKAOLIN Hartati Hartati; Alfa Akustia Widati; Aning Purwaningsih; Alfinda Novi Kristanti; Anik Fathur Rohmah
Jurnal Kimia Riset Vol. 3 No. 1 (2018): Juni
Publisher : Universitas Airlangga

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (725.931 KB) | DOI: 10.20473/jkr.v3i1.7800

Abstract

AbstrakSintesis ZSM-5 dilakukan dari metakaolin terdealuminasi tanpa penambahan templat organik. Sintesis dilakukan melalui pengaturan suhu hidrotermal mulai suhu 120oC, 150o, dan 170oC. Hasil sintesis dikarakterisasi dengan difraktometer sinar-X , spektrometer FTIR, dan adsorpsi/desorpsi nitrogen. Pengaturan suhu hidrotermal pada 120oC selama 24 jam belum menghasilkan ZSM-5, sedangkan sintesis pada suhu 150oC selama 24 jam diperoleh hasil ZSM-5 dengan kristal yang cukup baik. Hidrotermal pada 170o tetap dapat membentuk ZSM-5 dengan pengotor mordenit dan kurang kristalin dibandingkan sintesis pada 150oC. Kata kunci: AbstrakSintesis ZSM-5 dilakukan dari metakaolin terdealuminasi tanpa penambahan templat organik. Sintesis dilakukan melalui pengaturan suhu hidrotermal mulai suhu 120oC, 150o, dan 170oC. Hasil sintesis dikarakterisasi dengan difraktometer sinar-X , spektrometer FTIR, dan adsorpsi/desorpsi nitrogen. Pengaturan suhu hidrotermal pada 120oC selama 24 jam belum menghasilkan ZSM-5, sedangkan sintesis pada suhu 150oC selama 24 jam diperoleh hasil ZSM-5 dengan kristal yang cukup baik. Hidrotermal pada 170o tetap dapat membentuk ZSM-5 dengan pengotor mordenit dan kurang kristalin dibandingkan sintesis pada 150oC. Kata kunci: ZSM-5, metakaolin, terdealuminasi, tanpa templat, pengaturan suhu dan waktu Abstract             Synthesis of ZSM-5 is carried out from dealuminated metakaolin without the addition of organic template. The synthesis is done by setting the hydrothermal temperature from 120oC, 150oC, and 170oC. The results were characterized by an X-ray diffractometer, FTIR spectrometer, and nitrogen adsorption / desorption. Hydrothermal temperature setting at 120oC for 24 hours has not produced ZSM-5, while the synthesis at 150oC for 24 hours was obtained ZSM-5 with good crystals. Hydrothermal at 170 °C can still form ZSM-5 with mordenite impurities and less crystalline than synthesis at 150 °C. Keywords: ZSM-5, dealuminated metakaolin, without organic  templates, temperature and time settings Abstract             Synthesis of ZSM-5 is carried out from dealuminated metakaolin without the addition of organic template. The synthesis is done by setting the hydrothermal temperature from 120oC, 150oC, and 170oC. The results were characterized by an X-ray diffractometer, FTIR spectrometer, and nitrogen adsorption / desorption. Hydrothermal temperature setting at 120oC for 24 hours has not produced ZSM-5, while the synthesis at 150oC for 24 hours was obtained ZSM-5 with good crystals. Hydrothermal at 170 °C can still form ZSM-5 with mordenite impurities and less crystalline than synthesis at 150 °C. Keywords: ZSM-5, dealuminated metakaolin, without organic  templates, temperature and time settings
Direct Synthesis of Highly Crystalline ZSM-5 from Indonesian Kaolin Hartati Hartati; Alfa Akustia Widati; Tanti Kartika Dewi; Didik Prasetyoko
Bulletin of Chemical Reaction Engineering & Catalysis 2017: BCREC Volume 12 Issue 2 Year 2017 (August 2017)
Publisher : Department of Chemical Engineering - Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (102.769 KB) | DOI: 10.9767/bcrec.12.2.809.251-255

Abstract

Direct synthesis of ZSM-5 from Indonesian kaolin without calcination for the formation of metakaolin was done through the addition of an alkaline solution (sodium fluoride and sodium hydroxide) and the fusion using sodium hydroxide. Crystallization was conducted through hydrothermal method at 80 °C for four days. XRD diffractogram and FTIR spectra showed that the addition of sodium fluoride solution in the ratio Si/Al = 100 could produce highly crystalline ZSM-5, whereas the use of a sodium hydroxide solution and fusion process did not produce the crystalline ZSM-5. 
Sintesis Zeolit ZSM-5 dari Metakaolin Terdealuminasi Tanpa Cetakan Organik dengan Metode Desilikasi Hartati Hartati
Akta Kimia Indonesia Vol 4, No 1 (2019)
Publisher : LPPM, Institut Teknologi Sepuluh Nopember

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (757.085 KB) | DOI: 10.12962/j25493736.v4i1.5046

Abstract

Zeolit  ZSM-5 mesopori telah berhasil disintesis dari bahan dasar metakaolin  terdealuminasi tanpa cetakan  organik. Kalsinasi kaolin Bangka-Belitung dilakukan  pada  suhu  650°C  selama  8  jam untuk mendapatkan metakaolin. Dealuminasi metakaolin dilakukan dengan larutan HCl. Proses hidrotermal dilakukan pada suhu 170°C selama 48  jam menghasilkan zeolit ZSM-5 mikropori yang dikonfirmasi dari hasil  analisis produk menggunakan XRD dan FTIR. ZSM-5 mesopori diperoleh dengan  cara desilikasi ZSM-5 mikropori menggunakan larutan NaOH. Hasil analisis fisisorpsi N2 menunjukkan terbentuknya ZSM-5 mesopori. Metode  desilikasi terbukti efektif  meningkatkan  luas  permukaan  mesopori, volume  pori dan menurunkan  luas  permukaan mikropori. Kata kunci  : Zeolit ZSM-5 mesopori,  tanpa  cetakan  organik, metakaolin, dealuminasi,  desilikasi
Cyclic Acetalization of Furfural on Porous Aluminosilicate Acid Catalysts Hartati Hartati; Didik Prasetyoko; Mardi Santoso
Indonesian Journal of Chemistry Vol 16, No 3 (2016)
Publisher : Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (440.001 KB) | DOI: 10.22146/ijc.21144

Abstract

Porous aluminosilicate materials included microporous and mesoporous ZSM-5, hierarchical aluminosilicates, and mesoporous aluminosilicate were tested for acetalization of furfural (furan-2-carbaldehyde) with propylene glycol. The existing synthesis methods for aluminosilicate and ZSM-5 were modified to produce aluminosilicate material with hierarchical porous structure. Catalytic activity in acetalization of furfural by propylene glycol were conducted by refluxed of the mixture of furfural, propylene glycol and catalyst, using toluene as solvent and nitrobenzene as internal standard, at 106 °C for 4 h. The result showed that a combination of two structure directing agents, tetrapropylammonium hydroxide (TPAOH) and cetyltrimethylammonium bromide (CTAB) and modification of catalytic crystallization produced an active aluminosilicate framework that provides a wide access for a bulky reactants and strong acid sites to catalyze the reaction. The pore structure and the strength of the Brønsted acid sites were crucial for the high conversion of furfural to produce a cyclic acetal.
Selective Hierarchical Aluminosilicates for Acetalization Reaction with Propylene Glycol Hartati Hartati; Mardi Santoso; Hadi Nur; Leaw Wai Loon; Hasliza Bahruji; Imroatul Qoniah; Didik Prasetyoko
Indonesian Journal of Chemistry Vol 19, No 4 (2019)
Publisher : Universitas Gadjah Mada

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (90.112 KB) | DOI: 10.22146/ijc.40106

Abstract

Hierarchical micro-mesoporous aluminosilicates nanoparticles were synthesized at different of Si/Al ratios and were directly used as a solid acid catalyst for acetalization reaction with propylene glycol. TEM and N2 adsorption analysis of the resulting aluminosilicates revealed the formation of the hierarchical structure occurs on the Si/Al ratio increases the formation of mesoporous within the structure of aluminosilicate. The aluminosilicates exhibit high selectivity towards acetalization reaction in comparison with the homogeneous PTSA. The presence of mesoporous structures is crucial for increased conversion and selectivity of the reaction which presumably due to the improved diffusion of substrate to reach acid sites.
SOSIALISASI MANFAAT DAN PEMBUATAN NATTO DAN SOY YOGURT MELALUI KEGIATAN WEBINAR DAN PRAKTEK Sri Sumarsih; Afaf Baktir; Fatiha Khairunnisa; Muji Harsini; Aning Purwaningsih; Siti Wafiroh; Hartati Hartati; Purkan Purkan; Sofijan Hadi
Jurnal ABDI: Media Pengabdian Kepada Masyarakat Vol. 7 No. 1 (2021)
Publisher : Universitas Negeri Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26740/ja.v7n1.p103-107

Abstract

Natto and Soy Yogurt are fermented food products that are very beneficial for improving health. This community service activity aims to socialize the benefits and make them known to the wider community. However, community service activities during the Covid-19 pandemic cannot be carried out face-to-face and have activities with the community in large numbers. Therefore, this community service activity was carried out through webinar and practical activities. Online seminars was chosen so that the coverage was wider and more people could participate in the pandemic. Face-to-face and community activities are carried out with a limited number of participants, according to health protocols. The level of success, benefit and acceptance of the community from this community service activity is known from the responses of the participants during the activities. Based on the results of the assessment/ response of participants who were present virtually and those present at the location, In general it can be concluded that the PKM activity entitled "socializing the benefits and making natto and soy yogurt through webinars and practices" is going well, but better preparation is still needed.The material presented by the resource person is suitable for the current pandemic conditions, easy to understand, easy to practice and can be developed for home businesses. The Zoom Meeting application can be used as a medium for community service activities in pandemic conditions even though it still cannot reach the wider community.  Keywords: Socialization, natto, soy yogurt, webinar, practical
EDUKASI PEMANFAATAN BAHAN ALAM SEBAGAI OBAT TRADISIONAL UNTUK PENCEGAHAN PENYAKIT DAN PERAWATAN KESEHATAN Fatiha Khairunnisa; Qurrota A’yuni; Kautsar Ul Haq; Harsasi Setyawati; Ahmadi Jaya Permana; Rico Ramadhan; Yanuardi Raharjo; Mulyadi Tanjung; Sri Sumarsih; Hartati; Handoko Darmokoesoemo
Jurnal ABDI: Media Pengabdian Kepada Masyarakat Vol. 8 No. 1 (2022): Vol.8, No.1(2022)
Publisher : Universitas Negeri Surabaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26740/abdi.v8i1.15268

Abstract

One of the ways to maintain the personal health during an emergency condition as the current COVID-19 is the utilization of natural ingredients. It can be processed into traditional medicines. Jamu as a type of traditional medicine as well as natural heritage has been widely used by Indonesian to prevent the body from disease and to treat the health issue. This community service aimed to provide education for society regarding the chemical content and efficacy of natural ingredients such as empon-empon. The techniques to process it into traditional medicine for family healthcare was also delivered. The activity was carried out through face-to-face meeting while still applying the health protocols. The level of success and usefulness of the activity was known from the response of the participants. In general, the PKM activities in the scheme of theory and practical session has been carried out well. The materials presented in theory session was understandable. Meanwhile, the techniques used in practical session was easy to be replicated. The activity was expected to increase the knowledge and skills of the society in terms of natural ingredients that have good chemical content and the techniques to process them into nutritious drinks for families.
Direct Synthesis of Highly Crystalline ZSM-5 from Indonesian Kaolin Hartati Hartati; Alfa Akustia Widati; Tanti Kartika Dewi; Didik Prasetyoko
Bulletin of Chemical Reaction Engineering & Catalysis 2017: BCREC Volume 12 Issue 2 Year 2017 (August 2017)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.12.2.809.251-255

Abstract

Direct synthesis of ZSM-5 from Indonesian kaolin without calcination for the formation of metakaolin was done through the addition of an alkaline solution (sodium fluoride and sodium hydroxide) and the fusion using sodium hydroxide. Crystallization was conducted through hydrothermal method at 80 °C for four days. XRD diffractogram and FTIR spectra showed that the addition of sodium fluoride solution in the ratio Si/Al = 100 could produce highly crystalline ZSM-5, whereas the use of a sodium hydroxide solution and fusion process did not produce the crystalline ZSM-5.