ABSTRAK: Pembuatan batik tenun ikat di Bandar Kidul, Kediri tak lepas dari penggunaan pewarna sintesis yang mengandung bahan kimia. Hingga saat ini, industri batik tenun ikat Kediri masih belum bisa mengolah limbah pewarnaan sintetis sehingga mencemari lingkungan sekitar. Salah satu metode yang dapat digunakan untuk mereduksi limbah pewarna sintetis adalah fotokatalisis dengan menggunakan material semikonduktor fotokatalis. Material semikonduktor fotokatalis yang cocok digunakan dalam pengolahan limbah batik adalah TiO2. Material TiO2 bersifat non toksik dan ramah lingkungan. Efektifitas fotokatalis dapat ditingkatkan dengan menambahkan unsur lain, dalam hal ini adalah nitrogen. Nitrogen memiliki ukuran yang tidak jauh berbeda dengan oksigen dan juga memiliki energi ionisasi yang kecil. Penelitian ini merupakan studi awal untuk mempelajari pengaruh variasi suhu kalsinasi (300°C, 400°C, 500°C, 600°C dan 700°C) terhadap N/TiO2 untuk penjernihan limbah tenun ikat Kediri. Penelitian ini bertujuan untuk mengetahui suhu kalsinasi optimal yang diperlukan dalam sintesis material fotokatalis, sehingga dapat digunakan untuk menjernihkan limbah batik tenun ikat Kediri. Berdasarkan hasil Penelitian diketahui bahwa fasa dari material semikonduktor N/TiO2 dengan variasi suhu 300-700°C yang terbentuk masih dalam fasa anatase. Semakin tinggi suhu kalsinasi maka intensitas pada difraktogram akan semakin menurun dan ukuran kristal yang diperoleh pada N/TiO2 juga semakin kecil kecuali pada suhu 700°C. Semakin tinggi suhu kalsinasi maka energy band gap yang dihasilkan akan semakin kecil, kecuali pada suhu 600-700°C. Berdasarkan hasil karakterisasi dan aplikasi diketahui bahwa material N/TiO2 paling optimal dihasilkan pada suhu kalsinasi 500°C. ABSTRACT: The manufacture of woven batik industry at Bandar Kidul, Kediri is inseparable from the use of synthetic dyes containing chemicals. Until now, the Kediri woven batik industry has not been able to process synthetic dye waste which pollute the environment. Photocatalysis is method that can be used to reduce synthetic dye waste using photocatalyst semiconductor materials. Photocatalyst semiconductor material which is suitable for use in treating the woven batik waste is TiO2 since it is non-toxic and environmentally friendly. The effectiveness of the photocatalyst can be increased by adding another element which is in this study using nitrogen. Nitrogen has a size that is not much different from oxygen and also has a small ionization energy. This research is a preliminary study to know the effect of calcination temperature (300°C, 400°C, 500°C, 600°C and 700°C) on N/TiO2 materials for the purification of woven batik industry, Bandar Kidul, Kediri. The purpose of this study is to find out the optimal calcination temperature needed in the synthesis of photocatalyst material using wet impregnation, so that it can be used to purify the woven batik waste. Based on the research results, the phase of the N/TiO2 semiconductor materials formed with the range of temperature of 300-700°C is still an anatase phase. The higher the calcination temperature, the lower the intensity on the diffractogram and the sizes of the crystals are also smaller except at temperature of 700°C. The higher the calcination temperature, the smaller the energy band gap produced except at temperatures of 600-700°C. Based on the results of characterization and application, it is known that the most optimal material produced is N/TiO2 with a temperature variation of 500°C.