Darwish A.M.
Building and Construction Engineering Faculty, University of Technology, Baghdad

Published : 1 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 1 Documents
Search

Ultra Strengthening of Wooden Girders Darwish A.M.
Civil Engineering Dimension Vol. 12 No. 2 (2010): SEPTEMBER 2010
Publisher : Institute of Research and Community Outreach - Petra Christian University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (175.093 KB) | DOI: 10.9744/ced.12.2.113-117

Abstract

Owing to the natural defects of wood, structural timber is currently used with conservative safety factors. This study investigates the use of Carbon Fiber Reinforced Polymer (CFRP) for improving the strength of structural timber. Four flexural test stages were carried out, the modes of failure of the three specimens in each stage were studied to determine and strengthen the suspected weak zone which caused the failure. It was found that the tensioned fibers of ordinary timber girders normally fail first especially at the sections containing knots. Using a strip of CFRP to strengthen tensioned fibers is a well known technology, but it will not prevent a premature failure due to horizontal shear. A strength increase of 56% was reached by the adaption of shear connectors in the form of screws. After treating tensile and shearing strengths, still testing specimens showed failure at the compressed fibers. By enhancing the compressed fibers with a steel strip, the prototype girders showed a remarkable increase in flexural strength of about 175% compared with the ordinary wooden girders having the same dimensions.