Claim Missing Document
Check
Articles

Found 10 Documents
Search

Upaya Penyeimbangan Kapasitas Stasiun Kerja Dengan Pendekatan Theory Of Constraint Wahyuni, Dini; Syahputri, Khalida; Mangunsong, Evalina
Media Teknika Vol 11, No 2 (2016)
Publisher : Sanata Dharma University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (742.47 KB) | DOI: 10.24071/mt.v11i2.521

Abstract

This research was conducted in fishmeal processing companies in North Sumatera. The production process are sorting, washing, heating, pressing, drying, milling and packaging. Heating, pressing, and drying has the smallest capacity work station which is 1 ton per hour, while the washing station is 4 ton per hour, lead to bottleneck. Stop Watch Time study used to measure working elements’ cycle time in each work station during the 10 days of observation. Observation data tested by uniformity and adequacy test before determining standard time of working process. Demand for a year later is predicted using cyclical method so that capacity requirement can be obtained from that prediction and standard time of process. Theory of Constraint (TOC) is used to solve the bottleneck. Research showed that data measured are uniform and adequate; while constraint are found at the heating, pressing, and drying work station due to smaller capacity. That constraints can be solved by using five steps of TOC which obtained four alternative solutions, which is work load adjustment, overtime, addition of shifts or addition of machines. Alternatives for work load adjustment and addition of machines are not feasible after calculating them. Feasible alternatives are overtime and addition of shifts, which lead to cost consequences between them. Recommendation from this research is addition of shifts from 2 to 3 shifts per day to increased capacity for each heating, pressing and drying stations because they have the lower cost consequences.
Penjadwalan Tenaga Kerja untuk Menentukan Regular Days Off (RDOs) dengan Menggunakan Algoritma Monroe Syahputri, Khalida; Leviza, Jelly; Devi, T Keizerina
Media Teknika Vol 12, No 1 (2017)
Publisher : Sanata Dharma University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (638.593 KB) | DOI: 10.24071/mt.v12i1.942

Abstract

ABC Company is a company producing rubber crumb (crumb rubber) in the form of bales with quality SIR 5, SIR 10, and SIR 20. The processing is done consists of several work stations that are continuous. Scheduling the work force in the company is considered less precise in providing holidays and working time, because hiring labor for 7 business days to achieve the production target and exceed 40 hours worked during the week. This is not in accordance with the Decree of the Minister of Manpower of the Republic of Indonesia No.102/MEN/IV/2004 and Law of the Republic of Indonesia No.13 of 2003 on Manpower. So it is necessary to apply a good scheduling system for labor production process, one of the laborscheduling algorithm is to use Monroe. The manpower requirements for the entire production process is as many as 73 people. With the labor scheduling in PT.ABC still can work to meet production targets without disrupting weekday though individual workers get a day off two consecutive days alternately. Another advantage in labor scheduling algorithm Monroe with the company is able to minimize labor costs Rp.232.200.000/year.
PEMBERIAN MEJA POTONG KAIN ERGONOMIS UNTUK MENINGKATKAN PRODUKSI KERJA USAHA JAHIT Rahmi M Sari; Khalida Syahputri; Farida Ariani
ABDIMAS TALENTA: Jurnal Pengabdian Kepada Masyarakat Vol. 2 No. 1 (2017): ABDIMAS TALENTA: Jurnal Pengabdian Kepada Masyarakat
Publisher : Talenta Publisher

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (286.398 KB) | DOI: 10.32734/abdimastalenta.v2i1.2197

Abstract

Usaha Jahit yang berada di Kota Medan sangat berkembang dengan pesat. Hal ini disebabkan oleh tingginya minat masyarakat untuk menjahitkan bahan dasar pakaian sehingga akhirnya didapat sebuah desain yang sesuai dengan keinginan pelanggan. Demi mendapatkan ukuran dan desain yang susai tersebut, maka tiap usaha jahit harus menggunting kain sesuai dengan pola yang telah ditetapkan. Dalam proses kerja penjahitan, pemotongan pola merupakan bagian yang paling menentukan tingkat kesesuaian antara model pakaian dan hasil akhir berupa produk pakaian. Berdasarkan hasil observasi awal dengan mitra, mereka sering kesulitan pada saat proses pemotongan kain tersebut dikarenakan sempit dan terbatasnya ukuran meja potong kain. Dampak dari terbatasnya meja potong adalah pola kain yang digunting menjadi tidak sesuai dengan ukuran yang telah ditetapkan. Target yang telah tercapai adalah tersedianya meja potong ergonomis yang sesuai dengan dimensi dan ukuran tubuh pekerja sehingga dapat mendukung proses kerja jahit dan nantinya dapat mkeningkatkan kualitas produksi usaha jahit.
Upaya Penyeimbangan Kapasitas Stasiun Kerja Dengan Pendekatan Theory Of Constraint Dini Wahyuni; Khalida Syahputri; Evalina Mangunsong
Media Teknika Vol 11, No 2 (2016)
Publisher : Sanata Dharma University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24071/mt.v11i2.521

Abstract

This research was conducted in fishmeal processing companies in North Sumatera. The production process are sorting, washing, heating, pressing, drying, milling and packaging. Heating, pressing, and drying has the smallest capacity work station which is 1 ton per hour, while the washing station is 4 ton per hour, lead to bottleneck. Stop Watch Time study used to measure working elements cycle time in each work station during the 10 days of observation. Observation data tested by uniformity and adequacy test before determining standard time of working process. Demand for a year later is predicted using cyclical method so that capacity requirement can be obtained from that prediction and standard time of process. Theory of Constraint (TOC) is used to solve the bottleneck. Research showed that data measured are uniform and adequate; while constraint are found at the heating, pressing, and drying work station due to smaller capacity. That constraints can be solved by using five steps of TOC which obtained four alternative solutions, which is work load adjustment, overtime, addition of shifts or addition of machines. Alternatives for work load adjustment and addition of machines are not feasible after calculating them. Feasible alternatives are overtime and addition of shifts, which lead to cost consequences between them. Recommendation from this research is addition of shifts from 2 to 3 shifts per day to increased capacity for each heating, pressing and drying stations because they have the lower cost consequences.
Penjadwalan Tenaga Kerja untuk Menentukan Regular Days Off (RDOs) dengan Menggunakan Algoritma Monroe Khalida Syahputri; Jelly Leviza; T Keizerina Devi
Media Teknika Vol 12, No 1 (2017)
Publisher : Sanata Dharma University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24071/mt.v12i1.942

Abstract

ABC Company is a company producing rubber crumb (crumb rubber) in the form of bales with quality SIR 5, SIR 10, and SIR 20. The processing is done consists of several work stations that are continuous. Scheduling the work force in the company is considered less precise in providing holidays and working time, because hiring labor for 7 business days to achieve the production target and exceed 40 hours worked during the week. This is not in accordance with the Decree of the Minister of Manpower of the Republic of Indonesia No.102/MEN/IV/2004 and Law of the Republic of Indonesia No.13 of 2003 on Manpower. So it is necessary to apply a good scheduling system for labor production process, one of the laborscheduling algorithm is to use Monroe. The manpower requirements for the entire production process is as many as 73 people. With the labor scheduling in PT.ABC still can work to meet production targets without disrupting weekday though individual workers get a day off two consecutive days alternately. Another advantage in labor scheduling algorithm Monroe with the company is able to minimize labor costs Rp.232.200.000/year.
PENGUKURAN KINERJA DENGAN MENGGUNAKAN INTEGRASI 360° FEEDBACK DAN AHP DI PT. S Jhonli Pardosi; Mangara M. Tambunan; Khalida Syahputri
Jurnal Teknik Industri USU Vol 3, No 2 (2013): Jurnal Teknik Industri USU
Publisher : Departemen Teknik Industri Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (503.034 KB)

Abstract

PT. S adalah perusahaan yang bergerak dibidang pembuatan sirup. Perusahaan ini telah melakukan penilaian kinerja dengan menggunakan metode rating scale.  Penilaian dengan metode ini, kurang objektif karena penilaian kinerja hanya dilakukan oleh atasan sebagai bahan pertimbangan untuk analisis jabatan saja. Berdasarkan hal tersebut maka perlu diterapkan penilaian kinerja yang lebih objektif dengan tujuan mengetahui gambaran kinerja karyawan secara objektif. Pengukuran kinerja karyawan dilakukan terhadap level manajer dengan menggunakan integrasi 360º feedback dan AHP. Dari hasil penelitian, diperoleh prioritas variabel kinerja adalah kompetensi kerja. Prioritas subvariabel adalah kepemimpinan, keterampilan komunikatif dan tingkat komitmen bekerja. Nilai kinerja manajer pemasaran adalah 3,95 dengan bobot subvariabel  tertinggi adalah kepemimpinan, akurasi dalam bekerja dan komitmen bekerja. Nilai kinerja manajer produksi adalah 3,89 dengan bobot subvariabel  tertinggi adalah akurasi dalam bekerja dan komitmen bekerja. Nilai kinerja manajer humas adalah 3,65 dengan bobot subvariabel  tertinggi adalah keterampilan komunikatif dan komitmen bekerja. Nilai kinerja manajer keuangan adalah 3,90 dengan bobot subvariabel  tertinggi adalah kepemimpinan dan keterampilan komunikatif. Metode penilaian kinerja integrasi 360º feedback dan AHP lebih efektif dan menggambarkan kinerja karyawan secara objektif dari beberapa sumber penilai serta memperoleh variabel prioritas yang dapat digunakan sebagai acuan dalam pengembangan karir karyawan.
PENDEKATAN STRUCTURAL EQUATION MODELING UNTUK MENGANALISIS KEPUASAN PELANGGAN DI PT TELKOMSEL SUMBAGUT Amanah Pasaribu; Nazaruddin Matondang; Khalida Syahputri
Jurnal Teknik Industri USU Vol 3, No 3 (2013): Jurnal Teknik Industri USU
Publisher : Departemen Teknik Industri Universitas Sumatera Utara

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (482.589 KB)

Abstract

Persaingan antara perusahaan provider telekomunikasi di Indonesia sangat ketat berdampak terhadap tingginya ekspektasi pelanggan terhadap kualitas pelayanan. Jika perusahaan tidak mampu memberikan pelayanan yang berkualitas terhadap pelanggan maka akan muncul masalah ketidakpuasan terhadap pelanggan. Ketidakpuasan berdampak terhadap pendapatan yang diterima oleh perusahaan. Hal ini dapat dilihat dari menurunnya Average Revenue per User (ARPU) atau pendapatan rata-rata tiap pengguna pada 5 tahun berturut-turut di PT Telkomsel. Oleh karena itu, perusahaan harus menganalisis faktor-faktor kualitas pelayanan yang terdiri dari tangible, reliability, responsiveness, assurance dan empathy terhadap kepuasan pelanggan. Metode yang digunakan untuk menganalisis faktor-faktor tersebut adalah dengan metode Structural Equation Modeling (SEM). Hasil analisis SEM menunjukkan bahwa dari faktor-faktor service quality yang terdiri dari tangible, reliability, responsiveness, assurance dan empathy yang berpengaruh secara signifikan terhadap kepuasan pelanggan adalah tangible dan responsiveness dengan tingkat signifikansi α = 5% dengan nilai-t > 1,96 yaitu 2,31 dan 2,63 dengan nilai estimasi 0,24 dan 0,39. Hasil analisis SEM juga menunjukkan bahwa faktor reliability, assurance dan empathy tidak berpengaruh signifikan terhadap kepuasan pelanggan yang ditunjukkan dari nilai-t <1,96 yaitu -0,025, 1,13 dan 0,30 dan dengan nilai estimasi -0,03, 0,28 dan 0,06.
DESAIN EKSPERIMEN EKSTRAKSI DNA BAWANG PUTIH Elisabeth Ginting; Khalida Syahputri
Jurnal Sistem Teknik Industri Vol. 18 No. 1 (2016): JSTI Volume 18 Number 1 January 2016
Publisher : TALENTA Publisher

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (112.236 KB) | DOI: 10.32734/jsti.v18i1.343

Abstract

Desain eksperimen adalah suatu rancangan percobaan yang dilakukan untuk mendapatkan informasi yangberhubungan dengan atau diperlukan untuk persoalan yang sedang diteliti dapat dikumpulkan. Percobaan yangdibuat adalah percobaan ekstraksi DNA bawang putih. Tujuan dari percobaan ini adalah untuk mengetahui berapabanyak takaran garam, sabun, dan kadar alkohol yang efektif agar menghasilkan volume DNA bawang putih yangsebanyak mungkin untuk keperluan medis lanjutan, seperti klonning, untuk menangani kelainan-kelainan genetik danpenemuan obat-obat baru, pada bidang pertanian, peternakan, kehutanan untuk meningkatkan produk-produk baiktanaman maupun hewan unggul maupun di bidang lingkungan dalam hal mengatasi polutan serta perannya dalamkemajuan produksi pangan. Data diperoleh dari percobaan yang dilakukan dengan melihat berapa banyak volumeDNA bawang putih yang keluar. DNA bawang putih yang diamati berupa benang-benang putih dan halus yangmengapung ke permukaan cairan. Volume yang didapat merupakan data primer yang akan digunakan untukpengolahan data keterkaitan antara taraf faktor jumlah garam, jumlah sabun, dan kadar alkohol terhadap volumeDNA bawang putih yang dihasilkan. Hasil pengujian kenormalan data dengan uji Anderson Darling maka diperolehbahwa nilai p-value=0,2540 sedangkan α = 0,05 sehingga data yang didapat berdistribusi normal. Dalam pengujianhomogenitas varians terhadap jumlah sabun, jumlah garam dan kadar alkohol dapat digunakan uji Bartlet. Pengujianhomogenitas varians melalui uji Bartlett, diperoleh bahwa varians untuk interaksi faktor jumlah sabun, jumlahgaram, dan kadar alkohol adalah sama. Hasil perhitungan ANAVA menunjukkan untuk setiap perlakuan didapatkanHo diterima yang artinya setiap taraf faktor tidak memberikan efek signifikan terhadap perubahan volume DNAbawang putih. Persamaan regresi yang digunakan adalah regresi linear berganda, sehingga diperoleh persamaanregresi Y = 9,367+ (-0,079)X1 + 0,975 X2 + 0,625 X3. Dari perhitungan persamaan regresi didapat untuk hubunganjumlah sabun(X1), jumlah garam(X2), dan kadar alkohol (X3). Koefisien korelasi antara jumlah sabun (X1) denganperubahan volume DNA bawang putih (Y) sebesar -0,8679 yang artinya bahwa untuk faktor jumlah sabun memilikihubungan terbalik terhadap perubahan volume DNA bawang putih. Sebaliknya, koefisien korelasi jumlah garam (X2)dan kadar alkohol (X3) dengan perubahan volume DNA bawang putih (Y) didapatkan sebesar 0,411 dan 0,2635 yangartinya bahwa untuk faktor jumlah garam memiliki hubungan searah dengan perubahan volume DNA bawang putih.
APLIKASI TOOLS MANAGEMENT UNTUK MEREDUKSI WAKTU SET UP Khalida Syahputri; Indah Rizkya T
Jurnal Sistem Teknik Industri Vol. 19 No. 2 (2017): JSTI Volume 19 Number 2 July 2017
Publisher : TALENTA Publisher

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (358.633 KB) | DOI: 10.32734/jsti.v19i2.372

Abstract

Generally, furniture industry apply make to order in production systems and job shob (batch) in flow production. To produce a number of products with a uniform design of the required tools in the form of jig. Problems occurred at one of the furniture industry is the high sets up time due completion of the jig for use. Damaged Jigs, no precision, and unavailable jigs become the main reason for set up time be longer. The impact of time disrupted production and production targets are not reached. These problems can be overcome with management tools so that the tool/jig is ready for use in times of need. Using the tool management long setup time can be reduced because equipment is not ready for use and storage techniques by replacing the jig into removing the clamp handle can minimize the need of storage space. The settings storage location having regard to the level of usage can accelerate the process of supply to jig machining settings that the setup of jig include storage layout using the principles of popularity, making the procedure management of the jig in the room. The results obtained that with tool management setup time can be reduced to 61.17%.
ALAT PENGUMPUL BRONDOLAN BUAH UNTUK MENINGKATKAN PENDAPATAN PETANI KELAPA SAWIT Indah Rizkya Tarigan; Khalida Syahputri; Dwi Endah Widyastuti
JUITECH: Jurnal Ilmiah Fakultas Teknik Universitas Quality Vol 1, No 2 (2017)
Publisher : Universitas Quality

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36764/ju.v1i2.56

Abstract

Oil palm plantations are highly developed in Indonesia Especially North Sumatra. In the process of oil palm harvest, will produce palm kernels that fall to the ground. the oil palm seed is a mature palm fruit and can be sold. Based on preliminary observations with partners, they have difficulty in collecting fallen palm kernel. So many of the seeds of palm oil are abandoned and not sold. Farmers' income is reduced due to wasted crops. The absence of work facilities that occupy and the exhaustion of workers is the cause of farmers do not collect the seeds of palm. The activity of collecting palm kernel seeds is still done manually. The use of farming tools to collect palm kernel seeds facilitates the collecting of fallen palm kernel, so that the harvesting activities become effective and efficient. In the end it provides increased income for farmers. There was an increase in Partner's revenue of Rp.372.000, - and Partner 2 of Rp. 618,000, - in September 2017 using a palm kernel collecting apparatus.