Claim Missing Document
Check
Articles

Found 6 Documents
Search

PEMANFAATAN AMPAS SAGU SEBAGAI ELEKTRODA KARBON SUPERKAPASITOR Andika Afrianda; Erman Taer; Rika Taslim
Komunikasi Fisika Indonesia Vol 14, No 2 (2017)
Publisher : Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (879.212 KB) | DOI: 10.31258/jkfi.14.2.1119-1124

Abstract

Penelitian pembuatan karbon aktif berbasis sagu sebagai elektroda superkapasitor telah berhasil dilakukan. Tahap pertama produksi karbon aktif dimulai dengan mengeringkan limbah ampas sagu dibawah sinar matahari dan dilanjutkan dengan pengeringan oven, prakarbonisasi, penggilingan, pengayakan, aktivasi kimia dengan larutan KOH konsentrasi 0,2 M, pencetakan pelet, karbonisasi pada 600 °C diikuti aktivasi fisika pada suhu 850 °C dan pemolesan pelet. Sampel yang dikeringkan dalam oven dilakukan pada suhu 110 °C dan prakarbonisasi dilakukan pada suhu 100 °C sampai 250 °C selama 2 jam. Sampel digiling dengan menggunakan penggilingan mortar dan ball milling. Aktivator 0,2 M KOH digunakan untuk meningkatkan luas permukaan elektroda. Aktivasi fisika menggunakan H2O selama 1,5 jam. Karakterisasi sifat fisis dilakukan dengan pengukuran densitas, stabilitas termal (TGA) dan SEM dan sifat elektrokimia dilakukan dengan metode voltametri siklik dengan variasi scan rate 1, 2 dan 5 mV/s. Hasil kapasitansi spesifik optimum karbon aktif berbasis sagu untuk superkapasitor ditemukan pada scan rate 1 mV/s sebesar 74,85 F/g.
SEL SURYA FOTOELEKTROKIMIA DENGAN MENGGUNAKAN NANOPARTIKEL PLATINUM SEBAGAI ELEKTRODA COUNTER GROWTH Iwantono '; Erman Taer; Rika Taslim; Lutfi Rindang Lestari
Komunikasi Fisika Indonesia Vol 11, No 8 (2014)
Publisher : Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (483.184 KB) | DOI: 10.31258/jkfi.11.8.553-560

Abstract

Telah dilakukan fabrikasi dan pengukuran sel surya fotoelektrokimia dengan menggunakan nanopartikel platinumpada elektroda counter. Nanopartikel platinum ditumbuhkan di atas permukaan substrat padat (ITO) dengan metodein-situ growth (penumbuhan langsung) pada suhu 50 °C dengan variasi penumbuhan berulang (1 lapisan, 2 lapisan,dan 3 lapisan). Sel surya dibentuk seperti susunan sandwich yang menghubungkan antara elektroda counter(nanopartikel platinum) dan elektroda kerja (nanopartikel ZnO), dengan elektroda kerja diberi perlakuan variasikonsentrasi dan penambahan amoniak. Nanopartikel platinum tumbuh yang memberikan respon baik pada uji seladalah pada penumbuhan 1 lapisan. Hasil pengujian sel di bawah pencahayaan lampu halogen 100 watt, daerah aktifsel 1 cm x 1 cm memperlihatkan karakteristik I-V dengan parameter keluaran, tegangan rangkaian terbuka (V oc ) 274mV, arus rangkaian pendek (I sc ) 0,21 mA, fill factor (FF) 0,96 (96%), daya maksimum (Pmax) 0,056 mW untukvariasi konsentrasi. Sedangkan untuk variasi penambahan amoniak menghasilkan output tegangan rangkaian terbuka(V oc ) 119 mV, arus rangkaian pendek (I sc ) 0,1225 mA, fill factor (FF) 0,76 (76%), daya maksimum (P max ) 0,011 mW.
Trace Matriks 3 x 3 Berpangkat Bilangan Bulat Fitri Aryani; Rika Taslim
Jurnal Sains Matematika dan Statistika Vol 7, No 1 (2021): JSMS Januari 2021
Publisher : Universitas Islam Negeri Sultan Syarif Kasim Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24014/jsms.v7i1.12434

Abstract

Artikel ini membahas mengenai trace matriks berpangkat. Tepatnya trace matriks 3x3berbentuk khusus berpangkat bilangan bulat positif. Mendapatkan nilai trace matriksberpangkat tersebut, maka harus didapatkan terlebih dahulu bentuk umumperpangkatan dari matriks 3x3 berbentuk khusus ini. Bentuk umum perpangkatanmatriks 3x3 yang berbentuk khusus diperoleh dengan memulai memangkatkanmatriks dari sampai , selanjutnya dapat dugaan bentuk umumnya danterakhir dibuktikan dengan induksi matematika. Dan nilai trace matriks 3x3berpangkat bilangan bulat positif diperoleh dari bentuk umum perpangkatanmatriksnya dengan menggunakan definisi trace matriks.
PEMBUATAN DAN KARAKTERISASI KOMPOSIT KARBON ZnO NANOSTRUKTUR MENGGUNAKAN METODE DIP-COATING Wetya Fatma Kumala Sari; Erman Taer; Rika Taslim
Jurnal Online Mahasiswa (JOM) Bidang Matematika dan Ilmu Pengetahuan Alam Vol 2, No 1 (2015): Wisuda Februari 2015
Publisher : Jurnal Online Mahasiswa (JOM) Bidang Matematika dan Ilmu Pengetahuan Alam

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

The performance of activated carbon monoliths from rubber wood has been enhanced by modifying the surface through the addition of Zinc Oxide (ZnO) bydip coating method with immersion 30 minutes. The sample activated by combination of physical-chemical activation were named as E F and Carbon sample that had been grown nanoparticle ZnO were name as EK F. The physical properties, density crystalline, surface morphology and content element of the sample have been tested and analyzed. Density of E F was obtained 0,379 g.cm-3 and density value for sample EK F was obtained 0,390 g.cm-3. The measurement of Scanning Electron Microscope (SEM) showed the nanoparticle ZnO, and measurement of Energy Dispersive X-Ray (EDX) determines the atomic percentage of the element zinc, i.e 5,80%. Measurement of X-Ray Diffraction(XRD) showed the peaks of composite carbon electrode occurred at 2θ of 22,880 and 44,480 due to presence of carbon structure with their crystal orientation of (002) and (001). Electrochemical properties for carbon electrode cell and composite electrode carbon with the addition zinc oxide (ZnO) were analyzed using cyclic voltammetry. For carbon electrode without nanoparticle ZnO has specific capacitance of 53,90 F.g-1 and the specific capacitance for composite carbon electrode with immersing 30 minutes is 63,53 F.g-1. The result of the overall study showed that the modification carbon electrode with addition ofnanoparticle ZnO increased the values of specific capacitance electrode carbon for supercapacitor applications.
SINTESIS KARBON BERPORI BERBASIS DAUN JERUK NIPIS (Citrus Aurentifolia S.) SEBAGAI MATERIAL ELEKTRODA UNTUK APLIKASI SUPERKAPASITOR Erman Taer; Melda Riyani Butet; Apriwandi Apriwandi; Rika Taslim
Komunikasi Fisika Indonesia Vol 20, No 1 (2023)
Publisher : Universitas Riau

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31258/jkfi.20.1.9-18

Abstract

In this study, the electrode material was successfully made from activated carbon based on lime leaf biomass with variations in physical activation temperature of 800 ˚C, 850 ˚C, and 900 ˚C for supercapacitor applications. Porous carbon was synthesized through pre-carbonization steps, chemical activation using ZnCl2 activator, carbonization using N2 gas at a temperature of 600 ˚C, and physical activation using CO2. Density analysis confirmed the potential for the DJN-850 sample to have a high shrinkage of 52.24%. X-ray diffraction shows an amorphous structure of carbon characterized by broading peaks at 2θ=22° and 24°. Scanning electron microscopy analysis performed that the optimized sample possessed rich meso-,macropores followed by a high carbon content of 90.25%. The Fourier spectroscopic transformation test results identified the presence of functional groups O-H, C-O, C-H, C=C, and C≡C in the sample. The precursor activated at 850 C possessed a specific surface area of 675.129 m2 g-1 with adjusting micro-mesopore. Furthermore, the electrochemical properties of the samples were measured using cyclic voltammetry and galvanostatic charge-discharge with specific capacitances of 144.14 F g-1 and 189 F g-1, respectively.. Keywords: biomass precursor; Citrus aurentifolia S., carbon porous, electrode material, supercapacitor
PENGENDALIAN STOK BAHAN UTAMA PADA PRODUKSI KORAN DI PT. XYZ DENGAN MENGGUNAKAN METODE ECONOMIC ORDER QUANTITY (EOQ) PROBABILISTIC Muhammad Dhany Aprilia Pratama april; Fitriani Surayya Lubis; Misra Hartati; Harpito Harpito; Rika Taslim
JURNAL PERANGKAT LUNAK Vol 5 No 3 (2023): Jurnal Perangkat Lunak
Publisher : Universitas Islam Indragiri

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32520/jupel.v5i3.2802

Abstract

This research discusses a company engaged in printing newspapers or newspapers. There are 3 main ingredients in making newspapers, namely stencil paper, plate cleaning liquid and plate. The problem faced by the company is that the supply of the main ingredients has weaknesses, including delays in fulfilling the demand for the main ingredients with the uncertainty of the company's demand with the supplier of the main ingredients for making newspapers. The purpose of this research is to determine the number of main raw material stocks in newspaper production using the probabilistic economic order quantity (EOQ) method so as to minimize the total inventory cost. Mapping of the main material requirements using forecasting, calculation of economic order quantity (EOQ) probabilistic and calculation of inventory costs and the difference in savings in total inventory costs. The results of the probabilistic economic order quantity (EOQ) are 1 roll of stencil paper, 1 jug of plate cleaning liquid and 16 boxes of plates with a difference in cost savings of Rp. 108,867,156.