Claim Missing Document
Check
Articles

Found 4 Documents
Search

Studi Penambahan Inhibitor Organik Ekstrak Daun Bawang Tiwai (Eleutherine americana Merr.) pada Baja API 5L dalam Lingkungan 3,5% NaCl Triana, Yunita; Rinda, Sari Shaimah; Jatmoko, Awali; Sulitijono, Sulitijono
Specta Journal Vol 2 No 3 (2018): SPECTA Journal of Technology
Publisher : Specta Journal

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (720.448 KB) | DOI: 10.0610/specta.v2i3.11

Abstract

One that can be used as an organic inhibitor is bawang tiwai leaves extract. This study used 3.5% NaCl as corrosive media with inhibitor concentration of bawang tiwai leaves extract from 0 ppm to 500 ppm and immersion time from 10 days up to 30 days. The efficiency of inhibition was measured using a weight loss corrosion test, while the corrosion rate was obtained from polarization measurements. The FTIR test results show that the extract contains flavonoid compounds that act as antioxidants and inhibit corrosion. Inhibitory efficiency achieved up to 95.4545% for the addition of 300 ppm inhibitor and 20 days of immersion time. This inhibitory behavior is also supported by polarization measurements where the lowest corrosion rate of 0.00128 mm/year is obtained at the same concentration and immersion time.
Studi Penambahan Inhibitor Organik Ekstrak Daun Bawang Tiwai (Eleutherine americana Merr.) pada Baja API 5L dalam Lingkungan 3,5% NaCl Triana, Yunita; Rinda, Sari Shaimah; Jatmoko, Awali; Sulistijono, Sulistijono
SPECTA Journal of Technology Vol 2 No 3 (2018): SPECTA Journal of Technology
Publisher : LPPM ITK

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (720.448 KB) | DOI: 10.35718/specta.v2i3.11

Abstract

One that can be used as an organic inhibitor is bawang tiwai leaves extract. This study used 3.5% NaCl as corrosive media with inhibitor concentration of bawang tiwai leaves extract from 0 ppm to 500 ppm and immersion time from 10 days up to 30 days. The efficiency of inhibition was measured using a weight loss corrosion test, while the corrosion rate was obtained from polarization measurements. The FTIR test results show that the extract contains flavonoid compounds that act as antioxidants and inhibit corrosion. Inhibitory efficiency achieved up to 95.4545% for the addition of 300 ppm inhibitor and 20 days of immersion time. This inhibitory behavior is also supported by polarization measurements where the lowest corrosion rate of 0.00128 mm/year is obtained at the same concentration and immersion time.
IMPLEMENTASI REPAIR GROVE BAN LAYAK PAKAI DAN PENGEMBANGAN PRODUKTIFITAS SUMBER DAYA MANUSIA UNTUK MASYARAKAT KARANG JOANG Awali, Jatmoko; Laksono, Andromeda Dwi; Ismail, Ika; Triana, Yunita; Syaifuddin, Ahmad
DIKEMAS (Jurnal Pengabdian Kepada Masyarakat) Vol 4, No 1 (2020)
Publisher : Politeknik Negeri Madiun

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.32486/jd.v4i1.398

Abstract

Pendidikan adalah modal utama bagi suatu bangsa dalam upaya meningkatkan kualitas sumberdaya manusia yang dimilikinya. Sumberdaya manusia yang berkualitas akan mampu mengelola sumber daya alam dan memberi layanan secara efektif dan efisien untuk meningkatkan kesejahteraan masyarakat. Maka dari itu, titik sentral pembangunan adalah pemberdayaan sumber daya manusia termasuk tenaga kerja, baik sebagai sasaran pembangunan maupun sebagai pelaku pembangunan. Balikpapan merupakan kawasan industri yang dimana di desa Karang Joang tersebut merupakan daerah yang sedang berkembang. Namun sejauh ini, kurangnya pendidikan dan belum ada tindakan yang nyata baik dari pemerintah maupun tokoh masyarakat dan pengusaha. Akibatnya kebanyakan orderan yang diminta oleh para pengembang beralih pada sekelompok orang saja. Berdasarkan kenyataan tersebut, maka lembaga pelatihan dan pengembangan produktifitas sumber daya manusia yang berlokasi di desa Karang Joang mencoba untuk memfasilitasi kelompok produktif ini agar bisa lebih produktif dan berguna bagi upaya memperbaiki ekonomi keluarga, salah satunya adalah dengan jalan memberikan pelatihan tentang manajemen dan repair banĀ  layak pakai.
Analisis Variasi Arus Pengelasan Kombinasi SMAW-FCAW dengan Kampuh Double V-Groove terhadap Kekerasan dan Struktur Mikro Dissimilar Material JIS G3101-SS400 dan ASTM A36 Awali, Jatmoko; Rudiyanto, Fahmi; Thesalonicha, Somalinggi; Lubis, Muthia Putri Darsini; Tanjung, Rifqi Aulia; Triana, Yunita
Jurnal Rekayasa Mesin Vol 12, No 2 (2021)
Publisher : Jurusan Teknik Mesin, Fakultas Teknik, Universitas Brawijaya

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21776/ub.jrm.2021.012.02.19

Abstract

This study aims to determine the effect of variations of the current with combining two welding techniques SMAW and FCAW in double v-groove against the hardness and microstructure of the dissimilar material of JIS G3101-SS400 and ASTM A36. JIS G3101 SS400 and ASTM A36 each with a thickness of 10 mm were used as the materials. The combination of SMAW welding with E7018 electrodes and FCAW with E71T-1 were used as the welding techniques. The current used in SMAW welding were 60 A, 75 A, and 90 A. While in FCAW welding the current used were 190 A, 205 A, and 220 A. Hardness and microstructure tests were carried out on each sample. The results of the study showed that the current in welding process affect the hardness value and microstructure of material. The higher the welding current, the value of hardness of the material going to decrease and vice versa. The highest hardness values in SMAW and FCAW welding are at currents of 60 A and 190 A. Then the current in the welding process also affect the microstructure produced in the weld and HAZ. The formed microstructure containing pearlite and ferrite. The higher welding current, the percentage of pearlite produced increase and the percentage of ferrite decrease.