Jurnal KOMPOSITS
Vol 1, No 1: 20 Februari 2020, Jurnal KOMPOSITS

ANALISA STRUKTUR RANGKA ATAP GEDUNG REKTORAT UNIVERSITAS MUARA BUNGO (Rangka Kuda-Kuda Type Single Frame Beam)

Rio Mulyadi (Jurusan Teknik Sipil, Fakultas Teknik, Universitas Muara Bungo, Muara Bungo.)
Sucitra Wijaya (Jurusan Teknik Sipil, Fakultas Teknik, Universitas Muara Bungo, Muara Bungo)
Suwarjo Suwarjo (Jurusan Teknik Sipil, Fakultas Teknik, Universitas Muara Bungo, Muara Bungo)



Article Info

Publish Date
10 Feb 2020

Abstract

Atap pada bangunan berfungsi sebagai penutup bagian yang ada dibawahnya. Pada analisa struktur rangka atap gedung Rektorat Universitas Muara Bungo ini menggunakan penutup atap bahan seng superdeck, rusuk-rusuk atap menggunakan bahan kayu hal tersebut dikarenakan pemasangannya lebih mudah, harganya relatif murah, kekuatan kayu cukup tinggi Selain kayu pada analisa struktur rangka atap ini digunakan pula konstruksi baja konvensional karena kekuatannya cukup tinggi, dapat dibentuk menjadi profil yang diinginkan maka konstruksi baja konvensional ini dirasa cukup efisien digunakan pada rangka atap gedung Rektorat Universitas Muara Bungo apalagi mengingat gedung ini merupakan gedung berlantai 7. Pada analisa rangka atap gedung Rektorat Universitas Muara Bungo yang terdiri dari dimensi reng dan kaso dari konstruksi kayu kelas II. Gording dan  kuda-kuda dari konstruksi baja konvensional menggunakan metode LRFD (Load Resistance Factor Design)  dengan type kuda-kuda single frame beam dan menganalisa baut tanam di dalam beton.Beban-beban yang ditinjau adalah beban mati dan beban hidup menggunakan metode gempa kondisi ultimate yang mengacu pada dasar-dasar peraturan SNI.03.1729.2002. Berdasarkan hasil perhitungan analisa struktur atap gedung Rektorat Universitas Muara Bungo ini didapatkan dimensi reng adalah  lebar 2 cm dan tinggi 4 cm dan dimensi kaso adalah lebar 4 cm dan tinggi 8 cm . Menggunakan bahan baja konvensional dengan gording jenis profil INP.120,  Kuda-kuda menggunakan jenis profil  di titik A=B S.20 x 65 , di titik D = E S.10 x 25,4 dan di titik C S.15 x 42 cm dan baut tanam kuda-kuda di dalam beton minimmal harus ditanam t ≥ 43 cm. Kata kunci: Kayu, Baja Konvensional, LRFD,  metode gempa kondisi ultimate. The roof on the building serves as the cover of the existing part underneath. In the analysis of building roof frame structure Rectorate University of Muara Bungo is using a superdeck zinc roof cover, roof ribs using wood it is because the asembly is easier, the price is relatively cheap, the strength of wood is quite high In addition to wood on the roof frame analysis is also used conventional steel construction because of high strength, Become a desirable profile then this conventional steel construction is considered efficient enough to be used in the framework of the roof of the building Rectorate University of Muara Bungo especially considering this building is a 7 storey building. In the roof analysis of the building Rectorate University Muara Bungo consisting of dimensions of batten (Wooden small beam) and kaso (wooden beam cross longitudinal ) of wooden class construction II. Gording and horses from conventional steel construction using LRFD (Load Resistance Factor Design) method with single frame horses beam type and analyzing planting bolts in concrete based of horses (frame horses).The loads under consideration are dead load and live load using the ultimate condition earthquake method which refers to the basics of SNI.03.1729.2002 regulations. Based on the analysis of roof structure analysis of Rectorate building of Muara Bungo University, it is found that the dimension of the batten is 2 cm wide and 4 cm high and the dimension of kaso is 4 cm wide and 8 cm high. Using conventional steel material with gaming type profile INP.120, Horses use profile type at point A = B S.20 x 65, at point D = E S.10 x 25.4 and at point C S.15 x 42 Cm and bolts planting horses in the minimmal concrete must be planted t ≥ 43 cm. Keywords: Wood, Conventional Steel, LRFD, ultimate condition earthquake method.

Copyrights © 2020






Journal Info

Abbrev

JKTS

Publisher

Subject

Civil Engineering, Building, Construction & Architecture Materials Science & Nanotechnology

Description

Jurnal KOMPOSITS mempublikasikan artikel Hasil Penelitian dan Paper review (literature article) dengan Ruang Lingkup : 1. Material & Rekayasa Struktur. 2. Teknik Sumber Daya Air 3. Sistem Transportasi dan Perkerasan Jalan 4. Manajemen ...