cover
Contact Name
-
Contact Email
-
Phone
-
Journal Mail Official
-
Editorial Address
-
Location
Kota yogyakarta,
Daerah istimewa yogyakarta
INDONESIA
International Journal of Power Electronics and Drive Systems (IJPEDS)
ISSN : -     EISSN : 20888694     DOI : -
Core Subject : Engineering,
International Journal of Power Electronics and Drive Systems (IJPEDS, ISSN: 2088-8694, a SCOPUS indexed Journal) is the official publication of the Institute of Advanced Engineering and Science (IAES). The scope of the journal includes all issues in the field of Power Electronics and drive systems. Included are techniques for advanced power semiconductor devices, control in power electronics, low and high power converters (inverters, converters, controlled and uncontrolled rectifiers), Control algorithms and techniques applied to power electronics, electromagnetic and thermal performance of electronic power converters and inverters, power quality and utility applications, renewable energy, electric machines, modelling, simulation, analysis, design and implementations of the application of power circuit components (power semiconductors, inductors, high frequency transformers, capacitors), EMI/EMC considerations, power devices and components, sensors, integration and packaging, induction motor drives, synchronous motor drives, permanent magnet motor drives, switched reluctance motor and synchronous reluctance motor drives, ASDs (adjustable speed drives), multi-phase machines and converters, applications in motor drives, electric vehicles, wind energy systems, solar, battery chargers, UPS and hybrid systems and other applications.
Arjuna Subject : -
Articles 25 Documents
Search results for , issue "Vol 6, No 4: December 2015" : 25 Documents clear
Modified Synchronous Reference Frame Based Harmonic Extraction for Shunt Active Filter C.S. Subash Kumar; V. Gopalakrishnan
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 6, No 4: December 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (304.662 KB) | DOI: 10.11591/ijpeds.v6.i4.pp897-905

Abstract

This paper presents the modified synchronous reference frame based Shunt Active Filter (SAF) for the instantaneous compensation of harmonic current present at the Point of Common Coupling. The harmonics generated by the non linear load are extracted using the positive frame and negative frame of the input signal using the modified synchronous reference frame theory with extended Multiple Reference Frame based PLL (EMRFPLL). Based on the harmonics extracted, pulse width modulation signals are generated using Artificial Neural Network based Space Vector Pulse width Modulation technique (ANNSVPWM). Using this switching technique the losses can be reduced and compensation can be done more accurately The concept was verified using MATLAB / Simulink Simulation and the results confirm the THD at point of common coupling is below the required standards.
Development of Digital Controller for DC-DC Buck Converter Sarun Soman; Sangeetha T.S.
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 6, No 4: December 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (424.051 KB) | DOI: 10.11591/ijpeds.v6.i4.pp788-796

Abstract

This paper presents a design & implementation of 3P3Z (3-pole 3-zero) digital controller based on DSC (Digital Signal Controller) for low voltage synchronous Buck Converter. The proposed control involves one voltage control loop. Analog Type-3 controller is designed for Buck Converter using standard frequency response techniques.Type-3 analog controller transforms to 3P3Z controller in discrete domain.Matlab/Simulink model of the Buck Converter with digital controller is developed. Simualtion results for steady state response and load transient response is tested using the model.
Backstepping Control for a Five-Phase Permanent Magnet Synchronous Motor Drive Anissa Hosseynia; Ramzi Trabelsi; Atif Iqbal; Med Faouzi Mimounia
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 6, No 4: December 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (197.304 KB) | DOI: 10.11591/ijpeds.v6.i4.pp842-852

Abstract

This paper deals with the synthesis of a speed control strategy for a five-phase permanent magnet synchronous motor (PMSM) drive based on backstepping controller. The proposed control strategy considers the nonlinearities of the system in the control law. The stability of the backstepping control strategy is proved by the Lyapunov theory. Simulated results are provided to verify the feasibility of the backstepping control strategy.
Development of Predictive Current Controller for Multi-Port DC/DC Converter Santhosh T K; Govindaraju C
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 6, No 4: December 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (5853.437 KB) | DOI: 10.11591/ijpeds.v6.i4.pp683-692

Abstract

This paper investigates the utilization of a predictive current control for a fourport DC/DC power electronic converter with an input port, two storage portsand a load port suitable for a Hybrid Electric Vehicle. Being a power converterwith multiple ports, it has different operating modes. While the Stateflow con-troller is employed to handle mode selection, the predictive current controller isemployed for the inductor current control. The control laws governing each op-erating mode is derived out for valley current control. By making the inductorcurrent in the upcoming switching cycle equivalent to the reference, the duty cycleis predicted. Simulation and experimental results show improvements in currentripple minimization, faster dynamic performance and comparable to traditionalcontrol method.
FACT Device for Reactive Power Compensation in the Deregulated Electrical Power Environment M. Packiasudha; S. Suja
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 6, No 4: December 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (130.082 KB) | DOI: 10.11591/ijpeds.v6.i4.pp730-735

Abstract

In the deregulating electricity market, many private sector power producers are participating actively. With growing number of the wind mills and solar power generation, the reactive power production will be more because of induction generator and inductive type load. Many blackouts have happened in the past decades due to more reactive power which lead to a decrease in the magnitude of real power. It is very essential to compensate the reactive power, increase the real power flow in the transmission line, increase the transmission efficiency, improve the system stability and be in a safer place to save the fossil fuels for the future. In this paper the importance of reactive power and its various compensation techniques are applied to a five bus deregulated test case modeled and analyzed. The simulations were done using Matlab Simulink, for various FACT controllers such as STATCOM, SVC, SSSC and UPFC compensation and the results were tabulated and compared.
Utlization Cat Swarm Optimization Algorithm for Selected Harmonic Elemination in Current Source Inverter Hamed Hosseinnia; Murteza Farsadi
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 6, No 4: December 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (391.281 KB) | DOI: 10.11591/ijpeds.v6.i4.pp888-896

Abstract

The voltage source inverter (VSI) and Current source inverter (CSI) are two types of traditional power inverter topologies.In this paper selective harmonic elimination (SHE) Algorithm was impelemented to CSI and results has been investigated. Cat swarm (CSO) optimization is a new meta-heuristic algorithm which has been used in order to tuning switching parameters in optimized value.Objective fuction is reduction of total harmonic distortion(THD) in inverters output currents.All of simulation has been carried out in Matlab/Software.
Unknown Input Observer for a Doubly Fed Induction Generator Subject to Disturbances Samir Abdelmalek; Linda Barazane; Abdelkader Larabi
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 6, No 4: December 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (288.632 KB) | DOI: 10.11591/ijpeds.v6.i4.pp781-787

Abstract

This paper deals with the problem design of an unknown input observer (UIO) for a Doubly Fed Induction Generator (DFIG) subject to disturbances. These disturbances can be considered as unknown inputs (UI). The state space model of the DFIG is obtained from the voltage equations of the stator and rotor. Then, this latter is used for the design of an unknown input observer (UIO) in order to estimate both the state and the unknown inputs of the DFIG. Furthermore, the UIO gains are computed by solving a set of linear matrix inequalities (LMIs). Simulations results are given to show the performance and the effectiveness of the proposed method.
Performance of Fractional-Slot Winding PM Machines due to Un-even Coil Turns and Asymmetric Design of Stator Teeth Mohd Luqman Mohd Jamil; Syed Muhammad S. A. Al-Habshi; Md Nazri Othman; Tole Sutikno
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 6, No 4: December 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (466.471 KB) | DOI: 10.11591/ijpeds.v6.i4.pp853-859

Abstract

PM machines in which slot number and pole number combination differs by one have to be configured with asymmetric winding pattern in order to maximize it back-emf performance. However, this asymmetric winding configuration inherently results an unwanted Unabalanced Magnetic Force (UMF). Investigations of electromagnetic performance of fractional-slot asymmetric winding PM machines using 2-D Finite-Element Analysis are presented. The investigations are mainly driven by the effort of minimizing the UMF. By employing techniques such as non-uniform number of coil turns in every tooth and asymmetric design of stator tooth, the UMF are expected can be minimized. The investigations show that the radial component of UMF has greater effect than the tangential component on the UMF itself. In all proposed techniques, a slight reduction of machine torque performance is inevitable.
On the Impact of Timer Resolution in the Efficiency Optimization of Synchronous Buck Converters Pedro Amaral; Cândido Duarte; Pedro Costa
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 6, No 4: December 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (7043.189 KB) | DOI: 10.11591/ijpeds.v6.i4.pp693-702

Abstract

Excessive dead time in complementary switches causes significant energy losses in DC-DC power conversion. The optimization of dead time prevents the degradation of overall efficiency by minimizing the body diode conduction of power switches and, as a consequence, also reduces reverse recovery losses. The present work aims at analyzing the influence of one of the most important characteristics of a digital controller, the timer resolution, in the context of dead-time optimization for synchronous buck converters. In specific, the analysis quantifies the efficiency de-pendency on the timer resolution, in a parameter set that comprises duty-cycle and dead-time, and also converter frequency and analog-to-digital converter accuracy. Based on a sensorless optimization strategy, the relationship between all these limiting factors is described, such as the number of bits of timer and analog-to-digital converter. To validate our approach experimental results are provided using a 12-to-1.8V DC-DC converter, controlled by low- and high-resolution pulse-width modulation signals generated with an XMC4200 microcontroller from Infineon Technologies. The measured results are consistent with our analysis, which predicts the power efficiency improvements not only with a fixed dead time approach, but also with the increment of timer resolution.
Novel Method of FOC to Speed Control in Three-Phase IM under Normal and Faulty Conditions Mohammad Jannati; Tole Sutikno; Nik Rumzi Nik Idris; Mohd Junaidi Abdul Aziz
International Journal of Power Electronics and Drive Systems (IJPEDS) Vol 6, No 4: December 2015
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (424.608 KB) | DOI: 10.11591/ijpeds.v6.i4.pp831-841

Abstract

This paper proposes a novel method for speed control of three-phase Induction Motor (IM) which can be used for both healthy three-phase IM and three-phase IM under open-phase fault. The proposed fault-tolerant control system is derived from conventional Field-Oriented Control (FOC) algorithm with minor changes on it. The presented drive system is based on using an appropriate transformation matrix for the stator current variables. The presented method in this paper can be also used for speed control of single-phase IMs with two windings. The feasibility of the proposed strategy is verified by simulation results.

Page 1 of 3 | Total Record : 25