Garuda - Garba Rujukan Digital

All

Jurnal Teknik Kimia USU

jtk
Website

Published by TALENTA PUBLISHER

ISSN : - EISSN : 23374888 DOI : https://doi.org/10.32734/jtk.v11i1

Core Subject : Science, Social, Engineering,

Chemical Engineering, Chemistry & Bioengineering Chemistry Environmental Science Industrial & Manufacturing Engineering Materials Science & Nanotechnology

Jurnal Teknik Kimia USU merupakan jurnal elektronik yang mempublikasikan karya ilmiah di bidang teknik kimia yang diterbitkan oleh Departemen Teknik Kimia, Fakultas Teknik, Universitas Sumatera Utara. Jurnal ini tidak terbatas pada mahasiswa dan dosen Universitas Sumatera Utara, tetapi terbuka untuk mahasiswa, dosen dan peneliti dari instansi lain.

Arjuna Subject : Teknik Kimia (semua kategori) - Teknik Kimia (Lain-Lain)

Articles 297 Documents

1 2 3 4 5

PRODUKSI BIODIESEL DARI LEMAK SAPI DENGAN PROSES TRANSESTERIFIKASI DENGAN KATALIS BASA NaOH Ranggita Dwi Nindya Affandi; Toni Rizki Aruan; Taslim; Iriany
Jurnal Teknik Kimia USU Vol. 2 No. 1 (2013): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Biodiesel is an alternative fuel commonly produced from vegetable oil or animal fat with methanol through transesterification. Beef tallow was used as a raw material of transesterification to make biodiesel, because the price of beef tallow was driven down by the market and to reduce the pollution to the surrounding. In this research variable observed were reaction temperature, reaction time and amount of catalyst. Transesterification was carried out in a three necked spherical Pyrex vessel equipped with reflux condenser, stirrer and thermometer. In the present investigation an attempt has been made to use beef tallow as low cost sustainable potential feedstock for biodiesel production by single step transesterification process. Under optimal condition, the maximum yield of 95,67 % beef tallow methyl ester was obtained by using 6 : 1 molar ratio of beef tallow to methanol at 50 oC for a reaction time 30 minutes in the presence of 0,8 wt% of NaOH catalyst. The biodiesel properties were comparable to Indonesian National Standard (SNI). The results of this work showed that the use of beef tallow is suitable for feedstock of biodiesel production with low cost.

PENGARUH KADAR AIR, DOSIS DAN LAMA PENGENDAPAN KOAGULAN SERBUK BIJI KELOR SEBAGAI ALTERNATIF PENGOLAHAN LIMBAH CAIR INDUSTRI TAHU Ayu Ridaniati Bangun; Siti Aminah; Rudi Anas Hutahaean; M. Yusuf Ritonga
Jurnal Teknik Kimia USU Vol. 2 No. 1 (2013): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Liquid waste industrial of wheys contain very high organic materials. Organic compounds in the effluent are proteins, carbohydrates, fats and oils. Based on the results of field studies on Industry Hall of liquid waste industrial characteristics of whey in Medan, it is known that liquid waste industrial of wheys contain average BOD (4583 mg/l), COD (7050 mg/l), TSS (4743 mg/l ) and oil or fat (26 mg/l ) at pH 6.1. Therefore, the whey waste water must be treated before it is discharged into the environment to reduce the contaminants that accompany the waste. One alternative that can be used as a coagulant is moringa seed powder. This study used of moringa seed powder with a water content of 7 %. Variations of coagulant dosage which are used 2000, 3000, 4000, 5000 mg/200 ml liquid waste industrial of whey, coagulant particle size 50 and 70 mesh with the initial pH about 4. The optimum deposition time is obtained 60 minutes with 77.43 % reduction in turbidity, TSS 90.32 %, and 63.26 % COD in 5000 mg/200 ml dosage of coagulant and coagulant particle size of 70 mesh with the final pH about 4, it can be concluded that moringa seeds can be used as an effective coagulant because the reductions were obtained over 50 %.

PENGARUH PENGGUNAAN LARUTAN ALKALI PADA KEKUATAN TARIK DAN UJI DEGRADASI KOMPOSIT POLIPROPILENA BEKAS BERPENGISI SERBUK SERABUT KELAPA Fitriah Sari Nst; Harry Abrido S; Maulida
Jurnal Teknik Kimia USU Vol. 2 No. 1 (2013): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Composite is a combination of two different materials to obtain a material with physical properties and mechanical properties are better than any of its constituent parts. One of the many types of produced composite is composite with powdered natural fiber. This study uses the former polypropylene matrix derived from former cup bottle cup and powdered coconut fiber as filler treated with Sodium Hydroxide (NaOH). The ratio of the matrix and the filler is 85:15. This ratio is the optimum value obtained by the composite tensile strength with some ratios are 100:0, 95:5, 90:10 and 85:15. The purpose of this study was to determine the effect of the use of an alkaline solution of the resulting composite properties such as tensile strength, as well as the effect of degradation test on composite material former polypropylene with powdered coconut fiber as filler. Variation of composite degradation test were 10, 20 and 30 days, and immersion powder for 1 and 2 days. The method used in the manufacture of composites is the method of extrusion. The matrix form of the former polypropylene mixed with coconut fiber powder that has been soaked with NaOH, then mixed in a container, then put into the extruder operating temperature 1750C, printed using a hot press at a temperature of 1750C, and cut into pieces appropriate testing. The results showed that the optimum processing occurs with NaOH for 2 days. The test results showed degradation soaking for 2 days has tensile strength values higher than 1 day is equal to 29,023 MPa at 0 day, 28,835 MPa at 10 days, 26,762 MPa at 20 days and 25,361 MPa at 30 days.

PENGARUH SUHU DAN KECEPATAN PENGADUKAN PADA PROSES PEMBUATAN SURFAKTAN NATRIUM LIGNOSULFONAT DARI TEMPURUNG KELAPA Jhon Peri Rinaldo Sirait; Nico Sihombing; Zuhrina Masyithah
Jurnal Teknik Kimia USU Vol. 2 No. 1 (2013): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Coconut shell is one of agricultural wastes that having low commercial value. This research is objected to use coconut shell as the base material of producing surfactant. The use of coconut shell is basically due to its content of lignin, about 29,4%. The objective of this research is to obtain isolate lignin with increasing chatalis NaOH and H2SO4 with lignin identification, the effect of temperature and agitation rate of producing surfactant. The research was done in a reactor with temperature of 100 0C, 110 0C, 120 0C, 3 hours reaction time, pH 6, 80 rpm, 90 rpm, 100 rpm agitation rate, and coconut shell as the base material. Dry coconut shell is grinded and the powder is collected to be reacted. The coconut shell powder is reacted with sodium bisulfite solution with variation in ratio of 1:0,5. The product is filtered to get filtrate and residue. The filtrate is further analyzed by using the FT-IR spectrophotometry method. From the research we get maximum purity of surfactant at sodium bisulfite with reactant ratio of 1:0,5; Speed 100 rpm and temperature 120 0C.

PENENTUAN KONDISI OPTIMUM SUHU DAN WAKTU KARBONISASI PADA PEMBUATAN ARANG DARI SEKAM PADI Satriyani Siahaan; Melvha Hutapea; Rosdanelli Hasibuan
Jurnal Teknik Kimia USU Vol. 2 No. 1 (2013): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Charcoal is a solid porous material containing 80 - 90 % of carbon being produced from combustion at high temperatures (carbonization ), that the material only carbonized and not oxidized become carbon dioxide. The research is aimed to know the optimum conditions on the process of carbonization from the rice husks. The carbonization process conducted in temperatures 400 oC, 500 oC, and 600 oC with variations in time 30 minutes, 60 minutes, 90 minutes and 120 minutes. Optimum conditions carbonization for rice husk at temperature 400 oC for 120 minutes with a carbon content 41,3 %, moisture content 6,1 %, ash content 32,6 % and volatile matter content 20,5 %.

PENGURANGAN FFA DAN WARNA DARI MINYAK JELANTAH DENGAN ADSORBEN SERABUT KELAPA DAN JERAMI Julius Fernando Pakpahan; Tomas Tambunan; Agnes Harimby; M. Yusuf Ritonga
Jurnal Teknik Kimia USU Vol. 2 No. 1 (2013): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Jelantah is a cooking oil that has been used in a few time. It is not only have an unattractive colour and rancid, but also can make a risk to the health. Jelantah can be recovered by adsorbing the impurities and reduce color using the adsorbents. This study aimed to reduce levels of FFA and color of jelantah using coconut fiber and straw adsorbents with variation 50,70 and 100 mesh, variations in pressure at 1 atm and below, and the time variation of adsorption every 10 minutes during the first half hours. In this study, the best adsorbent to reduce free fatty acid (FFA) is coconut fiber with a pressure below 1 atm where FFA value before adsorbed is 0.006823 N and after being adsorbed 0.0002924 N, whereas for the reduction of oil color, the best adsorbent is straw with 100 mesh size because it reduces the color of 5.5 red and 24 yellow to 3.3 red and 21 yellow.

EKSTRAK DAUN SIRIH HIJAU DAN MERAH SEBAGAI ANTIOKSIDAN PADA MINYAK KELAPA Hermiati; Naomi Yemima Manalu; Mersi Suriani Sinaga
Jurnal Teknik Kimia USU Vol. 2 No. 1 (2013): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Extraction is the separation of a substance from the mixture, with the distribution of a solute between two solvents which can not be mixed to fetch solute from one solvent to another solvent. The purpose of this study was to determine the antioxidant activity found in betel leaf extract for coconut oil numbers peroxide analysis, antioxidant resistance, with Lovibond color test and to found variations in betel leaf types that produce the optimum operating conditions of antioxidants. In this study, green and red betel leaves extracted by using ethanol solvent, the extract is added to coconut oil and then tested peroxide number and color levels. The results obtained in this study were able to lower the number of betel leaves peroxide by 55.13% with the best optimum condition; volume of 150 ml of solvent, extraction time of 75 minutes, and stirring speed of 300 rpm for the raw material powder of red betel leaf.

PEMURNIAN CRUDE GLYCERINE MELALUI PROSES BLEACHING DENGAN MENGGUNAKAN KARBON AKTIF M. Afif Aufari; Sia Robianto; Renita Manurung
Jurnal Teknik Kimia USU Vol. 2 No. 1 (2013): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Crude glycerine is a concentrated liquid that with the glycerin content less than 88%. Crude glycerine has the dye produced by caroten. Caroten or usually called reddish yellow colour pigments cause the palm oil colour to be reddish yellow. Caroten is soluble in oil and fat but not in the water. Colours has a low quality and did not preferred by consumer and must be eliminated. This compound can be eliminated by a absorption process using activated carbon. The using of crude glycerine will further produce the product drugs and cosmetics industries. This research is conducted to study absorbtion of activated carbon to the crude glycerine impurities that causes the raddish yellow colour. This research do by using mesh, weight, and time of stirring with different variated.

PEMANFAATAN LIMBAH BATANG JAGUNG SEBAGAI ADSORBEN ALTERNATIF PADA PENGURANGAN KADAR KLORIN DALAM AIR OLAHAN (TREATED WATER) Fatimah Rahmayani; Siswarni MZ
Jurnal Teknik Kimia USU Vol. 2 No. 2 (2013): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Various result of agricultural waste that contain high cellulose can be used as an alternative adsorbent. One of them was derived from dried corn stalks which traditionally burnt after harvest that lead to environmental pollution. It is necessary to produce the value-added materials from corn stalks waste as an alternative adsorbent to reduce the level of chlorine in treated water. This process was performed by using various level of sulfuric acid concentration 1%, 3% and 5%, particles size 50 and 70 mesh in 105 oC with adsorbtion time 30, 60 and 90 minutes. The most favorable activation result was obtained at 5% concentration, with particle size 70 mesh, adsorbtion time 90 minutes and the iodine value was 482 mg/l with level of adsorbed chlorine was 96,08%. Based on this findings, we concluded that the corn stalks waste can be used as an alternative adsorbent in reducing the level of chlorine in treated water.

EKSTRAKSI KEMIRI DENGAN METODE SOXHLET DAN KARAKTERISASI MINYAK KEMIRI Ariestya Arlene
Jurnal Teknik Kimia USU Vol. 2 No. 2 (2013): Jurnal Teknik Kimia USU
Publisher : Talenta Publisher (Universitas Sumatera Utara)

Candlenut is originally from Hawaii. This plant is then spread all over the countries, including Indonesia, and firstly grow in Maluku. Candlenut becomes domestic and foreign commodities in Indonesia. This plant is known well because the seed is often used as the cooking ingredient. The seed of candlenut contains a large amount of oil, which is 50-60% from the mass of the seed. Candlenut oil is used as hair fertilizer, paint materials, and varnish material. With further research, candlenut oil is expected to be applied in wider scope. The aim of this research is to extract the candlenut oil from its seed maximally with Soxhlet extraction method. The benefit of this research is to give inputs and information about the suitable solvent that influence the oil extraction from candlenut seed, which can increase the use of candlenut as natural resource and support the other industries. The method of this research consists of early treatment of candlenut seed, Soxhlet extraction with acetone, ethanol, and n-hexane as solvent, then continued with the analysis of the oil. The conclusion of this research are the solvent which produce the highest yield in oil extraction of candlenut seed is n-hexane, with the yield value is 74,57% from the mass of the seed. However, the best quality of the candlenut oil is obtained from extraction with ethanol as the solvent, with the acid value is 8,27 gram KOH/gram oil.

Page 3 of 30 | Total Record : 297

1 2 3 4 5

Filter by Year

2012 2023

Filter By Issues

All Issue Vol. 12 No. 2 (2023): Jurnal Teknik Kimia USU Vol. 12 No. 1 (2023): Jurnal Teknik Kimia USU Vol. 11 No. 2 (2022): Jurnal Teknik Kimia USU Vol. 11 No. 1 (2022): Jurnal Teknik Kimia USU Vol. 10 No. 2 (2021): Jurnal Teknik Kimia USU Vol. 10 No. 1 (2021): Jurnal Teknik Kimia USU Vol. 9 No. 2 (2020): Jurnal Teknik Kimia USU Vol. 9 No. 1 (2020): Jurnal Teknik Kimia USU Vol. 8 No. 2 (2019): Jurnal Teknik Kimia USU Vol. 8 No. 1 (2019): Jurnal Teknik Kimia USU Vol. 7 No. 2 (2018): Jurnal Teknik Kimia USU Vol. 7 No. 1 (2018): Jurnal Teknik Kimia USU Vol. 6 No. 4 (2017): Jurnal Teknik Kimia USU Vol. 6 No. 3 (2017): Jurnal Teknik Kimia USU Vol. 6 No. 2 (2017): Jurnal Teknik Kimia USU Vol. 6 No. 1 (2017): Jurnal Teknik Kimia USU Vol. 5 No. 4 (2016): Jurnal Teknik Kimia USU Vol. 5 No. 3 (2016): Jurnal Teknik Kimia USU Vol. 5 No. 2 (2016): Jurnal Teknik Kimia USU Vol. 5 No. 1 (2016): Jurnal Teknik Kimia USU Vol. 4 No. 4 (2015): Jurnal Teknik Kimia USU Vol. 4 No. 3 (2015): Jurnal Teknik Kimia USU Vol. 4 No. 2 (2015): Jurnal Teknik Kimia USU Vol. 4 No. 1 (2015): Jurnal Teknik Kimia USU Vol. 3 No. 4 (2014): Jurnal Teknik Kimia USU Vol. 3 No. 3 (2014): Jurnal Teknik Kimia USU Vol. 3 No. 2 (2014): Jurnal Teknik Kimia USU Vol. 3 No. 1 (2014): Jurnal Teknik Kimia USU Vol. 2 No. 4 (2013): Jurnal Teknik Kimia USU Vol. 2 No. 3 (2013): Jurnal Teknik Kimia USU Vol. 2 No. 2 (2013): Jurnal Teknik Kimia USU Vol. 2 No. 1 (2013): Jurnal Teknik Kimia USU Vol. 1 No. 2 (2012): Jurnal Teknik Kimia USU Vol. 1 No. 1 (2012): Jurnal Teknik Kimia USU More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Rondang Tambun

Contact Email
rondang@usu.ac.id

Phone
+6281263166850

Journal Mail Official
rondang@usu.ac.id

Editorial Address
Departemen Teknik Kimia, Fakultas Teknik, Universitas Sumatera Utara Jl. Almamater Kampus USU, Medan

Location
Unknown,

Unknown

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Rondang Tambun

Contact Email rondang@usu.ac.id

Phone +6281263166850

Journal Mail Official rondang@usu.ac.id

Editorial Address Departemen Teknik Kimia, Fakultas Teknik, Universitas Sumatera Utara Jl. Almamater Kampus USU, Medan

Location Unknown, Unknown INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Rondang Tambun

Contact Email
rondang@usu.ac.id

Phone
+6281263166850

Journal Mail Official
rondang@usu.ac.id

Editorial Address
Departemen Teknik Kimia, Fakultas Teknik, Universitas Sumatera Utara Jl. Almamater Kampus USU, Medan

Location
Unknown,

Unknown

INDONESIA