Claim Missing Document
Check
Articles

Found 16 Documents
Search

MEMANFAATKAN IRIGASI SEBAGAI SUMBER ENERGI LISTRIK MIKROHIDRO DI SINGOSAREN WUKIRSARI IMOGIRI BANTUL JOGJAKARTA Suyanto, Muhammad
JURNAL GAUNG INFORMATIKA Vol 10 No 2 (2017): Jurnal Gaung Informaika Vol 10 No 2 Juli 2017
Publisher : JURNAL GAUNG INFORMATIKA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (853.165 KB)

Abstract

The development of contemporary technology provides a variety of environmental impacts, both positive and negative. This is a logical consequence of every developm ent of life for people both in rural and urban areas, through the Tri Dharma Perguruan Tinggi, a teacher can do community service. In order for universities to deal directly with the community through the practice of science and technology, community service activities should be undertaken. Community Service Program (Abdimas) is not only done by lecturers, but also by students through Real Work Lecture (KKN). The devotion to the community who carried out taking the tofik Utilizing Irrigation As a Source of Micro hydro Energy in Singosaren Wukirsari Imogiri Bantul Jogjakarta. Along with human nature that wants to always change and dynamic, hence since the invention of electric current until now, the source of electricity become a basic requirement for human in fulfilling and supporting the necessity of life, so that electricity play a very important role in technological development and development of the present to the future. With the presence of microhydro generator in Wukirsari village will add positive impact to the community, if the night through mikrohidro can be used as a means of public street lighting so that the security and anxiety during the day is reduced and to increase the income of the village of the formation of carpentry group by utilizing the carpentry tools require electricity from microhydro.
EVALUASI KEMAMPUAN TRANSFORMATOR DAYA PADA GARDU INDUK 150 KV WATES Suyanto, Muhammad; Setyowibowo, Ridwan; Pambudi, Prastyono Eko
Jurnal Teknologi Technoscientia Vol 10, No 2 (2018): Vol 10 No 2 Februari 2018
Publisher : IST AKPRIND YOGYAKARTA

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Increased population growth, economy and insfrastructure development, especially the construction of airports in Kulon Progo district indirectly impact on power availability. An Increase electric load in each year will affect the capacity of the power transformer at the 150 KV Wates substasion. With increasing electric load it will be the greater the electrical load borne by teh power transformator, so to prevent the occurence of overload, it is necesarry to eavaluate the power transformer capability by doing electric load prediction. In this reseacrh, the method used is trend analysis. For power transformer-I use exponential trend with MAPE value of 2,91% obtained estimate of load in year 2019 equal to 25,74 MVA where loading already exceed 80% While power transformer-II using the quadratic trend with MAPE of 1,19% obtained by the estimated load in 2025 of 52,29 MVA, after the addition of a special load plan, obtained load estimation in 2019 has reached 80%. So that in the year 2019 has been done addition of new power transformer, and in year 2024 can be done uprating on power transformer-I.
ANALISIS RESISTANSI PENTANAHAN SEBAGAI UPAYA UNTUK ANTISIPASI SAMBARAN PETIR DI DAERAH PERBUKITAN WILAYAH BANTUL Suyanto, Muhammad; Mulyaningsih, Sri
JURNAL TEKNOLOGI TECHNOSCIENTIA Technoscientia Vol 2 No 1 Agustus 2009
Publisher : Lembaga Penelitian & Pengabdian Kepada Masyarakat (LPPM), IST AKPRIND Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (569.36 KB) | DOI: 10.34151/technoscientia.v2i1.416

Abstract

The aim of this study was to find an information about varying soil resistant along residence area in Bantul Regency. The aim of the study is to compiling fixed grounding system. Factors controlling the grounding are ground resistivity, electrode resistivity, environmental condition, size and shape of the system. Ground resistivity needs a good grounding system, that accomplish to savety standard for people and its equipments. The ground system should be able to prevent dangerous caused by flash, whenever nuisance come out. It parposes to overcoming the current of ground system nuisance of electricity power, in order the power could be flowing to the ground, directly; not to the equipments. The resistivity data resulted from the field work measurements, shows some different va-lues in each place, that probably caused by different kinds of soils. For examples are re-gusol soil has a resistivity value of 22.05Ω, latosol 17.04Ω, and red mediteran 15.12Ω. Grumusol soil has resistivity of 7.8Ω, but after it’s analyzed by grounding with 4 electrode, the value is decrease into 4.22Ω. Those are caused by grumusol soil is clayy, while the other soils are sandy. Based of IEEE recomendation of ground resistivity values, home electricity should be <10Ω, while for flash protection should be < 5Ω. Up to now, the solu-tion for quenching the overload power, in order it’s unable to damage the equipments, it’s flowed to the ground directly.
PERBAIKAN FAKTOR DAYA DENGAN PENAMBAHAN NILAI KAPASITOR SEBAGAI PENGHEMAT ENERGI LISTRIK PADA BEBAN LAMPU FLUORESEN Suyanto, Muhammad
JURNAL TEKNOLOGI TECHNOSCIENTIA Technoscientia Vol 3 No 2 Februari 2011
Publisher : Lembaga Penelitian & Pengabdian Kepada Masyarakat (LPPM), IST AKPRIND Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (162.931 KB) | DOI: 10.34151/technoscientia.v3i2.480

Abstract

The use of electrical energy is made as efficient as possible, therefore to get the economical value, especially in the use of Fluorescent lamps, it is necessary to make an effort how to use energy that approach the installed value. The effort was dane by in cir-cuit tests using fluorescent lamps with different capacitor values and comparing them with economical lamps. Having obtained the capacitor values, the experiment were carried out to collect the actual data of the installed power. The resuls of the experiments were analyzed and showed that the increasing values of capasitors were followed by better power factors so they approached the associated installed powers.
PENINGKATAN DAYA PADA PEMBANGKIT LISTRIK MIKROHIDRO (PLTMh) DI DAERAH IMOGIRI BANTUL JOGJAKARTA Suyanto, Muhammad
JURNAL TEKNOLOGI TECHNOSCIENTIA Technoscientia Vol 5 No 1 Agustus 2012
Publisher : Lembaga Penelitian & Pengabdian Kepada Masyarakat (LPPM), IST AKPRIND Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (685.41 KB) | DOI: 10.34151/technoscientia.v5i1.513

Abstract

In rural areas there is generally a major irrigation canal that serves to irrigate the fields and also has the potential to be used as power plants. Developments Wukirsari Imogiri Bantul area, an agricultural region and its inhabitants have a side job as grate the coconut and make various handicrafts for souvenirs that use raw materials from a particular timber. Development of today's technology provides a variety of environmental impacts, both positive and negative, in the presence of micro hydropower plant in one of the villages in the area Imogiri will certainly add a positive impact for local communities. In the presence of micro-hydro, if night can be used as a means of public street lighting so that security and a sense of anxiety at night reduced incomes and to increase trade group be established to process the materials of wood and iron to take advantage of wood-working equipment that require electricity results from the existing micro-hydro power, yet still very limited relative kapisitasnya. Side activity that utilizes peratan carpentry can not be fulfilled using electricity from existing plants.Therefore we need an increased effort on Micro Hydro Power (MHP) is still very limited relative power. So in this study, is expected to obtain an increase in power can be realized with both and can obtain results in line with expectations.
APLIKASI SISTEM INVERTER 1 FASA DENGAN KAPASITAS BEBAN 1200 WATT Suyanto, Muhammad
JURNAL TEKNOLOGI TECHNOSCIENTIA Technoscientia Vol 6 No 1 Agustus 2013
Publisher : Lembaga Penelitian & Pengabdian Kepada Masyarakat (LPPM), IST AKPRIND Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (369.308 KB) | DOI: 10.34151/technoscientia.v6i1.597

Abstract

Providers Backup Power Supply for Household Electricity Load In automatic, very necessary as an emergency response efforts in the event of termination of electricity to consumers. So with a backup power supply that has been prepared, the electric lighting in the household is not disrupted. The effort is meant is conducted by making a piece of equipment such as power supply 1 Phase Inverter System Design for Load Capacity 1200 Watt, is a piece of equipment that can serve as a replacement power supply but can work efficiently and save energy. After designing and testing tools execute the inverter, it can be some of the results of the designation gauges recorded and performed calculations. The larger the installed load will produce a greater flow, this caused huge load requires a large current flow. At 50-250 cosQ load close to 1, while the 300-1200Watt load cosQ up and down, this happens when the 300-1200Watt load test, the load used in the form of incandescent bulbs. The voltage on the inverter device is sometimes not reached 220 volts when tested. This is due to the voltage source when the test does not reach the stable, and also due to the greater load at the time of testing with mixed loads. Long period of time of an inverter is able to work depends on the quality of the battery and how to use it.
ANALISIS PERBAIKAN SISTEM PENTANAHAN PADA KAKI MENARA SALURAN TRANSMISI TEGANGAN TINGGI 150 KV BANTUL-SEMANU JOGJAKARTA Suyanto, Muhammad
JURNAL TEKNOLOGI TECHNOSCIENTIA Academia Ista Vol 12 No 01 Agustus 2007
Publisher : Lembaga Penelitian & Pengabdian Kepada Masyarakat (LPPM), IST AKPRIND Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (165.826 KB) | DOI: 10.34151/technoscientia.v0i0.1989

Abstract

The research was carried out to get information about the improvement of gro-unding resistant value in tower feet of-high-voltage network, 150 kV, along tower trans-mission in power station, Bantul, Semanu. A good grounding system is used to flow cur-rent into the ground and prevent the current flow into the electrical equipment if electrical fault occurs. The result of measurement has shown that ground, type grumosol has a low grounding resistant value <10 Ω because its ground texture of clay has high ability to absorb and keep water and has very tiny particles and colloid property. The grounding resistant values of type regusol, litusol, brown latosol and red mediteran are above 20 Ω because of their ground texture, sand and clay. Chemical and physical reaction will take places in soil with clay structure. Its colloid property can tie/hold ion or water and sometimes free salt. The aim of this research is to get information about resistant value of soil type with almost ≤ 5 Ω by installing grounding electrode made from four galvanis steel coated with bronze with 15 mm in diameter, 10 meter long and two ground rods are parallel connected with 2 m each electrode and use counterpoise grounding system model. The result of the improvement is expected to meet standard requirement, SPLN almost ≤ 5 Ω.
SISTEM OPERASI SAKLAR OTOMATIS (ATS) 1 FASA 2200 WATT MELAYANI SUMBER PLN DAN GENSET Suyanto, Muhammad; Wisnubroto, P.; L.P, Rhamdhani
Jurnal Teknologi Vol 12 No 1 (2019): Jurnal Teknologi
Publisher : Jurnal Teknologi, Fakultas Teknologi Industri, Institut Sains & Teknologi AKPRIND Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.3415/jurtek.v12i1.2154

Abstract

Sistem otomasi dapat didefinisikan sebagai suatu teknologi yang berkaitan dengan aplikasi mekanik, elektronik dan sistem yang berbasis komputer. Dengan menggunakan teknologi otomasi, setiap orang dapat melakukan sesuatu tanpa harus bertindak secara langsung. Dengan kemudahan yang ditawarkan, kebutuhan manusia akan penerapan otomasi akan selalu meningkat. Contoh pengoperasian generator secara manual, dinilai masih kurang efisien karena masih memerlukan usaha dan waktu yang lebih dalam pengoperasiannya. Penelitian ini, membahas tentang Sistem Operasi Saklar Otomatis (ATS), Melayani Dua Sumber Energi Listrik 1 fasa bergantian dengan kapasitas beban 2200 Watt Pada Instalasi Rumah. Hal ini merupakan aplikasi Perencanaan pemindahan sumber energy listrik secara bergantian, jika salah satu sumber lepas/putus maka saklar akan secara otomatis berpindah pada sumber listrik yang lainnya. Dengan adanya penelitian ini diharapkan, dapat memberikan kontribusi keilmuan khususnya dalam perancangan sistem, saklar otomatis ATS (Automatic Transfer Switch) pada instalasi listrik rumah. Jadi ketika terjadi pemadaman suplai dari PLN, maka sumber energy listrik pada rumah dengan sendirinya berpindah ke sumber listrik dari genset. Sehingga listrik rumah tetap bisa digunakan karena mendapat bakcup suplai dari Genset. Kata kunci: , ATS, sumber listrik, sistem operasi
PENGARUH FAKTOR PERSONALITY TERHADAP KEAHLIAN DALAM END USER COMPUTING Wisnubroto, Petrus; Suyanto, Muhammad; Sudiro, Novi Yohana
Jurnal Teknologi Vol 12 No 1 (2019): Jurnal Teknologi
Publisher : Jurnal Teknologi, Fakultas Teknologi Industri, Institut Sains & Teknologi AKPRIND Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.3415/jurtek.v12i1.2203

Abstract

Model penelitian diuji pada perangkat desa Kabupaten bantul Daerah Istimewa Yogyakarta, khususnya perangkat desa yang melakukan pekerjaan rutinitas dengan menggunakan computer sebagai based solution problem, sebanyak 70 responden dikategorikan sebagai sampel dalam penelitian dengan mengirim kuesioner ke computer anxiety fear – anticipation, computer attitude- intimidation, math anxiety responden. Pengujian dilakukan dengan 5 (lima) langkah yaitu uji Non Respon Bias, Uji Reliabilitas dan Validitas , uji Korelasi antar variable, uji hipotesis (tujuan penelitian) dengan regresi parsial dan regresi berganda Dengan demikian permasalahan dalam penelitian ini adalah apakah factor personality (computer anxiety fear – anticipation, computer attitude- intimidation, math anxiety ) mempunyai pengaruh yang signifikan terhadap keahlian dalam end user computing , sedangkan tujuan penelitian ini adalah menganalisis factor personality (computer anxiety fear- anticipation, computer attitude- intimidation, math anxiety) terhadap keahlian personil end user computing. Hasil penelitian menunjukkan bahwa F Test untuk variable personality terhadap Y ( keahlian dalam end user computing ) dengan equal variance assumed probabilitasnya diatas 0,05 maka kedua varians responden yang menjawab kuesioner dan responden yang tidak menjawab kuesioner adalah sama. variable personality terhadap Y ( keahlian dalam end user computing ) mempunyai nilai alpha cronbach di atas 0,60 sehingga pertanyaan angket reliable. Hasil perhitungan nilai corrected item total correlation terlihat bahwa untuk kesemua item pertanyaan variable personality terhadap Y (keahlian dalam end user computing ) di atas 0,164 maka dapat disimpulkan bahwa item-item variable valid. Persamaan regresi berganda Y = 4.409 – 0,159 X1 + 0,133 X2 + 0,01783 X3 + 0, 08658 X4 - 0, 229 X5 - 0, 0520 X6.Hasil analisis R2 = 0,359 mempunyai arti keseluruhan variable personality memberi pengaruh terhadap variable dependen Y ( keahlian dalam end user computing) sebesar 35,9% sedangkan yang 64, 1% dijelaskan oleh variable lainnya yang tidak dimasukkan dalam penelitian. Standard error of estimate 0, 4383 menunjukkan bahwa standar penyimpangan dari persamaan pendugaan seebsar 0, 4383. Jika dilihat dari standar deviasi Y yang menunjukkan hasil 0, 5335 memberi arti bahwa model ini cukup layak digunakan, karena standar deviasi model lebih kecil dari standar deviasi variable Y. F hitung adalah 10.682 dengan taraf signifikansinya 0, 000 karena probabilitasnya ( 0,000) jauh lebih kecil dari p < 0,1 menunjukkan adanya hubungan yang signifikan independen variable terhadap dependen variable.
ANALISIS RESISTANSI PENTANAHAN SEBAGAI UPAYA UNTUK ANTISIPASI SAMBARAN PETIR DI DAERAH PERBUKITAN WILAYAH BANTUL Suyanto, Muhammad; Mulyaningsih, Sri
JURNAL TEKNOLOGI TECHNOSCIENTIA Technoscientia Vol 2 No 1 Agustus 2009
Publisher : Lembaga Penelitian & Pengabdian Kepada Masyarakat (LPPM), IST AKPRIND Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.34151/technoscientia.v2i1.416

Abstract

The aim of this study was to find an information about varying soil resistant along residence area in Bantul Regency. The aim of the study is to compiling fixed grounding system. Factors controlling the grounding are ground resistivity, electrode resistivity, environmental condition, size and shape of the system. Ground resistivity needs a good grounding system, that accomplish to savety standard for people and its equipments. The ground system should be able to prevent dangerous caused by flash, whenever nuisance come out. It parposes to overcoming the current of ground system nuisance of electricity power, in order the power could be flowing to the ground, directly; not to the equipments. The resistivity data resulted from the field work measurements, shows some different va-lues in each place, that probably caused by different kinds of soils. For examples are re-gusol soil has a resistivity value of 22.05Ω, latosol 17.04Ω, and red mediteran 15.12Ω. Grumusol soil has resistivity of 7.8Ω, but after it’s analyzed by grounding with 4 electrode, the value is decrease into 4.22Ω. Those are caused by grumusol soil is clayy, while the other soils are sandy. Based of IEEE recomendation of ground resistivity values, home electricity should be &lt;10Ω, while for flash protection should be &lt; 5Ω. Up to now, the solu-tion for quenching the overload power, in order it’s unable to damage the equipments, it’s flowed to the ground directly.