eProceedings of Engineering
Vol 6, No 2 (2019): Agustus 2019

Simulasi Qos Layanan Komunikasi Penumpang Menggunakan Wlan 802.11n Pada Kereta Cepat Jakarta-surabaya

Lisnawati S. Bangun (Telkom University)
Erna Sri Sugesti (Telkom University)
Doan Perdana (Telkom University)



Article Info

Publish Date
01 Aug 2019

Abstract

Abstrak Kereta Cepat merupakan sarana transportasi yang memiliki dampak positif dibandingkan Pesawat Terbang. Hal ini disebabkan efesiensi waktu diperjalanan dapat digunakan secara produktif, khususnya bagi yang membutuhkan layanan internet. Kereta Cepat Jakarta-Surabaya mengimplementasikan penggunaan Wi-Fi standar IEEE 802.11n karena fleksibilitasnya dalam mengakses layanan internet. Pengukuran ini menggunakan simulasi Network Simulator 3.26 (NS 3.26). Penelitian ini mengevaluasi komposisi trafik yang memiliki QoS terbaik pada Wi-Fi 802.11n. Parameter yang digunakan adalah delay, jitter, throughput, dan packet loss. Simulasi dirancang menggunakan lima skenario yang terdiri dari metode A, metode B, metode C, metode D dan metode E. Perbedaan dalam setiap skenario terletak pada data rate dan packet size yang digunakan. Berdasarkan lima metode tersebut, dapat disimpulkan delay dan throughput pada setiap layanan berbanding terbalik. Hal ini disebabkan delay yang besar menyebabkan throughput yang kecil. Berdasarkan metode A, metode B, metode C, layanan terbaik yang dapat digunakan adalah layanan VoIP dengan nilai sebesar 2,617 ms dan throughput sebesar 0,0075 Mbps. Hal ini disebabkan layanan VoIP memiliki tingkat priority layanan tertinggi dibandingkan layanan lainnya. Pada mix layanan metode D, layanan terbaik yang dapat digunakan adalah layanan VoIP vs Data (web browsing) dengan delay sebesar 2,644 ms dan throughput sebesar 0,0098 Mbps. Mix layanan tersebut memiliki kinerja yang lebih baik dibandingkan layanan lainnya. Pada metode E, delay yang dihasilkan saat menggunakan kanal sebesar 6,933 ms dan throughput sebesar 0,0412 Mbps. Hal ini disebabkan terdapat pantulan sinyal yang dihasilkan dari AP ke user yang menyebabkan delay yang besar. Kata kunci : WLAN, Access Point, Delay, Jitter, Throughput, Packet Loss Abstract Highspeed train is a means of transportation that has a positive impact compared to airplane. This is due to the efficiency of travel time that can be used productively, especially for workers who need internet service. Jakarta-Surabaya highspeed train implements the use of the IEEE 802.11n Wi-Fi standard because of its flexibility in accessing internet services. This measurement uses a Network Simulator 3.26 simulation (NS 3.26). This study evaluates the composition of traffic that has the best QoS on Wi-Fi 802.11n. The parameters used are delay, jitter, throughput, and packet loss. The simulation is designed using five scenarios consisting of method A, method B, method C, method D and method E. The difference in each scenario lies in the size of the data rate and packet size used. Based on the five methods produced, it can be concluded that the delay and throughput for each service are inversely proportional. This is because a large delay causes a small throughput. Based on method A, method B, method C, the best service that can be used is VoIP service with a value of 2,617 ms and throughput of 0,0075 Mbps. This is because VoIP services have the highest priority service level compared to other services. In the D mix service method, the best service that can be used is VoIP vs Data (web browsing) services with a delay of 2,644 ms and throughput of 0,0098 Mbps. Mix of services has a better performance than other services. In method E, the delay generated when using a channel is 6,933 ms and throughput is 0,0412 Mbps. This is because there is a reflection of the signal generated from the AP to the user which causes a large delay. Keywords: WLAN, Access Point, Delay, Jitter, Throughput, Packet Loss

Copyrights © 2019






Journal Info

Abbrev

engineering

Publisher

Subject

Computer Science & IT Control & Systems Engineering Electrical & Electronics Engineering Engineering Industrial & Manufacturing Engineering

Description

Merupakan media publikasi karya ilmiah lulusan Universitas Telkom yang berisi tentang kajian teknik. Karya Tulis ilmiah yang diunggah akan melalui prosedur pemeriksaan (reviewer) dan approval pembimbing ...