Siba Monther Yousif
Al-Nahrain University

Published : 3 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : Bulletin of Electrical Engineering and Informatics

An end-fire low profile patch antenna to work on WiMAX frequencies used for harvesting power supply Anwer Sabah Mekki; Siba Monther Yousif; Bashar Mudhafar Ahmed; Mustafa Mohammed Jawad
Bulletin of Electrical Engineering and Informatics Vol 10, No 5: October 2021
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/eei.v10i5.3166

Abstract

In this paper, an end-fire microstrip patch antenna (MPA) is proposed of 3 GHz as a center frequency, designed, simulated, and measured to work on WiMAX frequencies within standard of 802.16e (WiMAX). A high gain ranged between (12.117-13.324) dB, high front to back ratio (F/B) of (35.770) at the center frequency, a wide band of 1.701 GHz, low profile, and semi-ideal voltage standing wave ratio (VSWR) of 1.053 is achieved. The simulation is done using computer simulation technology (CST-MW). The proposed design is based on two Fire-retardant substrates (FR-4) of relative permittivity (ε) 4.3+j0.025 and 1.53 mm thickness for each one, which is considered a high loss material. The measurement results show good agreement with the simulated results. In addition, the design can be used for harvesting power supply from mobile towers. Finally, the proposed design is compared with two other designs in terms of power conversion efficiency and overall size.
Compact low profile 5.8 GHz MPA for on-body applications Siba Monther Yousif; Anwer Sabah Mekki; Ahmed Jumaa Lafta
Bulletin of Electrical Engineering and Informatics Vol 12, No 3: June 2023
Publisher : Institute of Advanced Engineering and Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.11591/eei.v12i3.4518

Abstract

A compact microstrip patch antenna (MPA) with a T shape monopole technique is designed, simulated, and measured. By using fire retardant material (FR-4) as a substrate with a low profile, the proposed antenna is designed and simulated to be used for on-body biomedical applications. A center frequency of 5.78 is achieved with a gain of 11.78 dB and a matching impedance of -47.47 dB. A 1.48 W/Kg (10 gm) as a specific absorption rate (SAR) is achieved and 29.69 dB front to back ratio with a bandwidth of 3.376 GHz. The antenna was examined in free space as well as on-body using CST-MW software. The proposed antenna is fabricated and examined. Finally, a comparison is done among simulated results, measured results, and the dual-band dual-mode antenna. The proposed antenna overcomes the latter work in terms of small size, high matching impedance, high front to back ratio, and operating bandwidth.