Claim Missing Document
Check
Articles

Found 7 Documents
Search

Peningkatan Kualitas Citra Segementasi Objek Dari Permukaan Air Pada Metode Otsu Thresholding Dan Persamaan Gaussian Erwin Dwika Putra; Dedy Agung Prabowo; Dedy Abdullah
Jurnal Informatika Upgris Vol 3, No 2: Desember (2017)
Publisher : Universitas PGRI Semarang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.26877/jiu.v3i2.1875

Abstract

Abstract - The disturbance resulted from the image taken in the water are lighting and signal distortion.  This research describes the level of difficulty and noise that interfere with the processing of digital images taken on the sea surface.  The method used in the research is thresholding otsu-gaussian method with gray level that will be tested differently, where previous research had been investigated by using vehicle plate number object [2]. The result of the research are [1] the smaller the gray level specified at the histogram density will affect the segmentation result with the reduced noise generated by the image without vibration noise or noise with vibration. [2] with no image vibration noise segmentation results greatly affect the noise such as (a) with no image vibration noise, the segmentation results strongly affect the noise such as (a) reflected light (b) other reflected shadow of water so that it becomes background on objects in the  water.  [3] the vibrated image will actually eliminate the minimal background noise generated from the reflection of water. the vibrated image will also affect the change of the original shape of the object due to factors influenced by the vibration bias that occurs in the waterAbstrak- Gangguan yang dihasilkan dari gambar yang diambil dari dalam air yaitu, pencahayaan, distorsi signal [1]. Sedangkan pada makalah penelitian ini akan memaparkan tingkat kesulitan beserta noise yang menggangu pada pengolahan citra digital yang diambil diatas permukaan air. Metode yang akan diusulkan pada makalah penelitian ini adalah metode thresholding Otsu-Gaussian dengan tingkat level keabuan yang akan di ujicoba berbeda-beda, dimana pada penelitian sebelumnya telah diteliti menggunakan objek plat nomor kendaraan [2]. Hasil dari penelitian ini didapat (1) Semakin kecil level keabuan yang ditetapkan pada kerapatan histogram akan memperngaruhi hasil segmentasi dengan berkurangnya noise yang dihasilkan oleh gambar tanpa noise getaran mupun noise dengan getaran. (2) Dengan citra yang tidak ada noise getaran hasil segmentasi sangat berpengaruh terhadap noise seperti: (a) Cahaya yang dipantulkan air (b) Bayangan lain yang dipantulkan air sehingga menjadikan background pada objek yang ada didalam air. (3) Untuk citra yang diberi getaran justru akan menghilangkan sedikitnya noise backgroung yang dihasilkan dari pantulan air. (4) Citra yang diberi getaran juga akan memperngaruhi perubahan dari bentuk asli objek karena faktor yang dipengaruhi oleh bias hasil getaran yang terjadi pada air.Kata Kunci : Otsu-Gaussian, Air, Noise
IMPLEMENTASI ALGORITMA HIDDEN MARKOV MODEL SEBAGAI PENGENALAN PERINTAH SUARA PADA APLIKASI WINAMP Dedy Abdullah; Rizki Ramadhan
Jurnal Pseudocode Vol 3, No 1 (2016): Volume 3 Nomor 1 Februari 2016
Publisher : Universitas Bengkulu

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (778.738 KB) | DOI: 10.33369/pseudocode.3.1.15-25

Abstract

Salah satu teknologi yang sedang berkembang saat ini adalah speech recognition yang mengolah suara menjadi suatu perintah yang dapat dikenal oleh suatu mesin sehingga memungkinkan seseorang melakukan remote pada aplikasi yang ada pada komputer dengan menggunakan suara yang masuk melalui microphones. Tujuan dari penelitian ini yaitu membuat Media Player Winamp dapat dioperasikan menggunakan suara dengan Algoritma Hidden Markov Model. Sinyal suara dicuplik sehingga menjadi sinyal digital kemudian dinormalisasi dan diproses dengan preprocessing signal menggunakan metode LPC (Linear Predective Coding) selanjutnya dianalisis dan dicari nilai probabilitas yang maksimum sehingga bisa dikenali menggunakan Hidden Markov Model (HMM). Hasil penelitian menunjukan algoritma Hidden Markov Model dapat digunakan untuk mengeksekusi fungsi aplikasi winamp melalui perintah suara.Kata kunci: Speech Recognition, Sinyal Suara, Linear Predective Coding, Hidden Markov Model.
KOMPARASI PERBAIKAN KUALITAS SEGMENTASI PADA CITRA DIGITAL METODE FUZZY C-MEANS DAN OTSU Dedy Abdullah; Erwin Dwika Putra
Jurnal Pseudocode Vol 4, No 1 (2017): Volume 4 Nomor 1 Februari 2017
Publisher : Universitas Bengkulu

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (545.858 KB) | DOI: 10.33369/pseudocode.4.1.71-80

Abstract

Berkembang dari penelitian sebelumnya yang dilakukan, Komparasi metode fuzzyc-means dan metode otsu dapat disimpulkan bahwa hasil dari perbandingan tersebut menunjukkan kualitas dari metode fuzzy c-means lebih baik daripada otsu pada beberapa data dan otsu lebih baik daripada fuzzy c-mens pada data yang lain, maka pada penelitian ini akan membahas perbandingan kualitas citra apabila metode fuzzyc-means digabungkan dengan otsu dan juga sebaliknya otsu digabungkan dengan fuzzyc-means. Hasil penelitian menunjukkan bahwa FCM – Otsu dapat dilakukan dengan hasil gambar dan matrik yang sama sedangkan Otsu – FCM tidak dapat dilakukan dikarenakan tidak dapat melakukan perhitungan iterasi dari hasil gambar Otsu
Model Aplikasi M-Commerce Berbasis Android Untuk Mendukung Transaksi Harian PT. AMC Marissa Utami; Dedy Abdullah; Hersi Tannia
Jurnal Sistem Informasi dan E-Bisnis Vol 3, No 1 (2021): Januari
Publisher : JUSIBI (Jurnal Sistem Informasi dan E-Bisnis)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (522.691 KB)

Abstract

Mobile commerce adalah salah satu media yang banyak diminati para produsen-produsen di bidang bisnis saat ini. Hal ini dikarenakan m-commerce banyak mem-berikan kemudahan dalam melakukan transaksi karena bisa dilakukan dimana saja selagi masih terkoneksi dengan jaringan internet. Penelitian ini bertujuan untuk membangun aplikasi mobile commerce yang sesuai dengan permasalahan yang ada di PT. AMC. Penelitian ini terdiri dari empat tahapan penelitian, antara lain identifikasi masalah, pengumpulan data, desain aplikasi dan pengujian. Dari hasil penelitian, aplikasi yang sesuai dengan PT. AMC adalalah aplikasi dengan fitur antara lain halaman kategori produk, halaman pemesanan, informasi nota, informasi cara pemesanan, hubungi dan daftar pertanyaan
Rancang Bangun Rumah Cerdas Menggunakan RFID Dedy Abdullah; Nuri David Maria Veronika; Nur Arlin Afidha Ningsih
Jurnal Sistem Informasi dan E-Bisnis Vol 2, No 5 (2020): September
Publisher : JUSIBI (Jurnal Sistem Informasi dan E-Bisnis)

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (370.161 KB)

Abstract

Rumah cerdas adalah salah satu dari sistem pengendali rumah yang memberikan kenyamanan dan keamanan yang berlangsung secara otomatis kepada pemilik rumah. Dalam penelitian ini penulis membuat sebuah miniatur rumah cerdas berupa simulasi yang nantinya terdapat rangkaian elektronika untuk dapat mengontrol rumah cerdas tersebut. Projek rumah cerdas ini menggunakan mikrocontroler arduino uno yang berfungsi sebagai pusat kendali dari masing-masing sensor. Projek rumah cerdas ini menggunakan sensor RFID (RadioFrequencyIdentification)  untuk sistem pengamanan pada pintu, cara kerja RFID untuk membuka pintu dengan cara menggunakan kartu dimana kartu ini sudah di program maka LCD akan memberi informasi pada layar LCD bahwa  Access diterima maka pintu akan terbuka. Rumah cerdas ini juga dilengkapi pendeteksi sensor suhu DHT11 untuk mendeteksi suhu panas didalam ruangan. Sensor LDR untuk mendeteksi paparan cahaya dan sensor air untuk mendeteksi tetesan air hujan.
Implementation Of The Inter Tk Package, Sub-Process And Os In The Network Management Application Development With Python Programming Language Muhammad Guntur Akbar; Harry Witriyono; Yovi Apridiyansyah; Dedy Abdullah
Jurnal Komputer, Informasi dan Teknologi (JKOMITEK) Vol. 3 No. 1 (2023): Juni
Publisher : Penerbit ADM

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53697/jkomitek.v3i1.1210

Abstract

The development of technology is currently running very rapidly, especially in the field of computer networks that make it possible to connect all people from various places. The need for information triggers the rapid development of network infrastructure technology by several vendors or brands. The need for network infrastructure is of course inseparable from the large number of users who use the internet service, causing new problems because the number of users is not proportional to the number of technicians available. For general users, they can wait for the handling schedule from the technician, while for agencies that need a network to complete their work, they don't have that time. To overcome this, you can use a special program to check the network regularly where everyone can use it so that it can reduce free customer service at network providers. One programming language that can be used open source for the development of these applications is python. Python is a multipurpose interpretive programming language with a design philosophy that focuses on code readability. Python programming is still rarely used because it still uses the terminal as the main access where the user has to type certain code to execute the desired result, such as the Command Prompt Windows (CMD) program. The use of python-based applications can be made more comfortable for users by using a GUI (Graphical user interface) display using the TKInter library, which is a standard Python package for creating GUI displays. Tkinter has an interface to the Tk toolkit that can work as an object-oriented layer on top of Tk. Tkinter has many components that can be used to create user-friendly interfaces. Apart from Tkinter, the application uses a subprocess and os library which functions to access the terminal and execute certain comments in the terminal. The built application has functions for pinging, nslookup, ipconfig, network info, active connection and network processes. Ping and Nslookup require data to be entered in text input on the same line, for ping you can input the IP address of the intended network or website address (requires internet connection) while nslookup can be filled in with the website address.
Implementasi Metode PCQ – Queue Tree Pada Router Mikrotik Untuk Meningkatkan Quality Of Service Jaringan Internet Di Desa Renah Semanek AR Walad Mahfuzi; Dedy Abdullah; Ujang Juhardi; Marhalim Marhalim; Raymond Pallas
Jurnal Media Infotama Vol 19 No 2 (2023): Oktober
Publisher : UNIVED Press

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37676/jmi.v19i2.4173

Abstract

Abstract_Bandwidth management is a network management technique in an effort to provide fair and satisfactory network performance, which regulates computer networks so that bandwidth is used optimally and evenly. The internet network located in Renah Semanek Village has problems such as unstable internet connection, unequal internet distribution, making it difficult for everyone to access the internet. This study aims to stabilize the internet connection by dividing the maximum possible bandwidth across all clients, so that users will get an equal amount of bandwidth. This implementation has been tested and proven to improve Quality of Service (QoS) on Rt Rw Net. The results of the implementation of the PCQ-Queue Tree method get an increase in QoS value seen from the upload and download parameter testing, initially the internet connection was not divided equally.