Claim Missing Document
Check
Articles

Found 10 Documents
Search

ANALYSIS OF BLAST VIBRATION IMPACT AT PARAMBAHAN COAL MINE, WEST SUMATERA USING SQUARE ROOT SCALED DISTANCE METHOD AGUS NUGROHO; WIROTO WIMBO PRIHONO; TATANG WAHYUDI
Indonesian Mining Journal Vol 9, No 2 (2006): INDONESIAN MINING JOURNAL Vol. 09 No. 2 June 2006
Publisher : Puslitbang tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (143.678 KB) | DOI: 10.30556/imj.Vol9.No2.2006.648

Abstract

Blasting which was conducted at Parambahan produced a series of blast vibrations that might be harmful to human safety and surroundings. Therefore, the vibrations need to be evaluated whether it was over permitted the threshold for human safety or not. One of analysis methods for this purpose is square root scaled distance. The principle of the proposed method is to assess blast vibration impact on the environment for the cases when the blasting for opening mine had been performed previously. Analysis results shows that blast vibrations at Parambahan is below the allowed threshold of blast vibration for environment. Using measurement distance from blast source of 20 to 2,000 m, the lowest measured vibration is 0.18 mm/s and the highest one is 21.0 mm/s. Those mean that blast-generated vibrations at Parambahan are still safe for human and surrounding environment.
PROCESSING OF THE GOLD ORE FROM KEDONDONG AREA, SOUTH LAMPUNG USING GRAVITY CONCENTRATION METHOD Lili Tahli; Tatang Wahyudi
Indonesian Mining Journal Vol 16, No 1 (2013): INDONESIAN MINING JOURNAL Vol. 16 No. 1 February 2013
Publisher : Puslitbang tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2382.511 KB) | DOI: 10.30556/imj.Vol16.No1.2013.439

Abstract

Kedondong gold ores seem promising to be processed. Referring to its mineralogy characters, the ores can be treated by gravity concentration method that include Knelson concentrator, shaking table, jig and sluice box as well. Processing the gold sample coded A from Kedondong, South Lampung by Knelson concentrator increased the Au grade from 21.87 to 399.76 g/t. Its recovery was 91.57 %. The silver grade also improved from 287.83 to 3,427.12 g/t performing recovery of 49.65 %. Re-processing Knelson concentrator concentrates using shaking table enlarged the Au and silver grades to 1,199.28 and 5,430.80 g/t respectively. Both Au and Ag recoveries were around 89.84% and 47.45% respectively. Another sample, coded B, provided grade 165.80 g/t Au (from 8.93 g/t) and 3,275.05 g/t Ag (from 172.73 g/t) when processed by Knelson concentrator. A shaking table process for such a B-Knelson concentrate yielded the Au and Ag grades to 710,05 and 13.800,80 g/t respectively and also improved the Au and Ag recoveries to 85.56 and 85.17%. Concentrate Sample A has satisfied the requirement for final processing using smelting method, however, Sample B still needs more shaking table process in order to get satisfied condition for smelting process, namely the grade of gold >1,000 g/t.
STIRRING AND NON-STIRRING METHODS USED TO MAKE SYNTHETIC DOLOMITE-BASED EPSOM SALT TATANG WAHYUDI; BUDHY AGUNG
Indonesian Mining Journal Vol 9, No 1 (2006): INDONESIAN MINING JOURNAL Vol. 09 No. 1 February 2006
Publisher : Puslitbang tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (247.635 KB) | DOI: 10.30556/imj.Vol9.No1.2006.654

Abstract

The increasing need of magnesium sulfate heptahidrat by various industries and the limited availabil- ity of this material in nature are two reasons to produce MgSO4.7H2O synthetically. Basically, such a material can be produced from dolomite. A laboratory scale of dolomite-based epsomite making which employed two crystallization processes was conducted. Those were stirring and non-stirring methods and the results showed that stirring one yielded 98.2312 to 98.7244 % MgSO4.7H2O salt. The non-stirring method produced salts of 97.5929 – 99.0378%. Yet prior to salt processing, magne- sium sulfate solution was evaporated at 100 – 110°C to get solution densities around 1.35, 1.38 and1.4 g/ml. The bigger the density the bigger the MgO and SO3 contents
MINERALOGICAL CHARACTERS OF KARANG PANINGAL EPITHERMAL VEIN DEPOSITS, WEST JAVA TATANG WAHYUDI
Indonesian Mining Journal Vol 14, No 2 (2011): INDONESIAN MINING JOURNAL Vol. 14 No. 2 June 2011
Publisher : Puslitbang tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (856.81 KB) | DOI: 10.30556/imj.Vol14.No2.2011.493

Abstract

Karang Paningal gold-ore deposits belong to the epithermal deposits. As hydrothermal deposits, the alter- ation that occurs in this area comprises argillitization, sericitization and silicification. The gold is included within several veins that perform three texture types, namely chalcedony, comb and vuggy. Based on its mineral contents and vein deposit types, mineralization at Karang Paningal took place in two stages that was early epithermal process producing comb-vuggy vein deposit and final epithermal deposit retaining chalcedony vein deposit. Zone of prospective mineralization takes place within vein and rocks beneath and above veins
A LITERATURE STUDY OF BENEFITING K-BEARING SILICATE ROCKS AS RAW MATERIALS FOR POTASSIUM FERTILIZER Agus Wahyudi; Tatang Wahyudi
Indonesian Mining Journal Vol 16, No 2 (2013): INDONESIAN MINING JOURNAL Vol. 16 No. 2 June 2013
Publisher : Puslitbang tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (4496.437 KB) | DOI: 10.30556/imj.Vol16.No2.2013.428

Abstract

As an agricultural country Indonesia requires NPK fertilizer up to 2.6 million tons per year. However, such a number is mostly fulfilled by imports, particularly potassium (K) fertilizer. Almost a 100% of K-fertilizer comes from Canada and Russia in the form of KCl (sylvite) salt. Indonesia does not have sylvite mineral, but retains some K-bearing minerals such as K-feldspar and leucite. Both are different in characteristics from sylvite. K-feldspar and leucite are the alumino-silicate minerals. They require special treatment to process them into K-fertilizer. Several techniques can be applied to process both minerals, such as by mechano-chemistry, leaching, alkali fusion and bioleaching. Research on the utilization of K-source minerals as a raw material for K fertilizer is rela- tively rare. The opportunity to conduct such a research is widely open, as currently conducted by the Research and Development Centre for Mineral and Coal Technology.
A LITERATURE STUDY OF BENEFITING K-BEARING SILICATE ROCKS AS RAW MATERIALS FOR POTASSIUM FERTILIZER Agus Wahyudi; Tatang Wahyudi
Indonesian Mining Journal Vol 16 No 2 (2013): INDONESIAN MINING JOURNAL Vol. 16 No. 2 June 2013
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/imj.Vol16.No2.2013.428

Abstract

As an agricultural country Indonesia requires NPK fertilizer up to 2.6 million tons per year. However, such a number is mostly fulfilled by imports, particularly potassium (K) fertilizer. Almost a 100% of K-fertilizer comes from Canada and Russia in the form of KCl (sylvite) salt. Indonesia does not have sylvite mineral, but retains some K-bearing minerals such as K-feldspar and leucite. Both are different in characteristics from sylvite. K-feldspar and leucite are the alumino-silicate minerals. They require special treatment to process them into K-fertilizer. Several techniques can be applied to process both minerals, such as by mechano-chemistry, leaching, alkali fusion and bioleaching. Research on the utilization of K-source minerals as a raw material for K fertilizer is rela- tively rare. The opportunity to conduct such a research is widely open, as currently conducted by the Research and Development Centre for Mineral and Coal Technology.
PROCESSING OF THE GOLD ORE FROM KEDONDONG AREA, SOUTH LAMPUNG USING GRAVITY CONCENTRATION METHOD Lili Tahli; Tatang Wahyudi
Indonesian Mining Journal Vol 16 No 1 (2013): INDONESIAN MINING JOURNAL Vol. 16 No. 1 February 2013
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/imj.Vol16.No1.2013.439

Abstract

Kedondong gold ores seem promising to be processed. Referring to its mineralogy characters, the ores can be treated by gravity concentration method that include Knelson concentrator, shaking table, jig and sluice box as well. Processing the gold sample coded A from Kedondong, South Lampung by Knelson concentrator increased the Au grade from 21.87 to 399.76 g/t. Its recovery was 91.57 %. The silver grade also improved from 287.83 to 3,427.12 g/t performing recovery of 49.65 %. Re-processing Knelson concentrator concentrates using shaking table enlarged the Au and silver grades to 1,199.28 and 5,430.80 g/t respectively. Both Au and Ag recoveries were around 89.84% and 47.45% respectively. Another sample, coded B, provided grade 165.80 g/t Au (from 8.93 g/t) and 3,275.05 g/t Ag (from 172.73 g/t) when processed by Knelson concentrator. A shaking table process for such a B-Knelson concentrate yielded the Au and Ag grades to 710,05 and 13.800,80 g/t respectively and also improved the Au and Ag recoveries to 85.56 and 85.17%. Concentrate Sample A has satisfied the requirement for final processing using smelting method, however, Sample B still needs more shaking table process in order to get satisfied condition for smelting process, namely the grade of gold >1,000 g/t.
MINERALOGICAL CHARACTERS OF KARANG PANINGAL EPITHERMAL VEIN DEPOSITS, WEST JAVA TATANG WAHYUDI
Indonesian Mining Journal Vol 14 No 2 (2011): INDONESIAN MINING JOURNAL Vol. 14 No. 2 June 2011
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/imj.Vol14.No2.2011.493

Abstract

Karang Paningal gold-ore deposits belong to the epithermal deposits. As hydrothermal deposits, the alter- ation that occurs in this area comprises argillitization, sericitization and silicification. The gold is included within several veins that perform three texture types, namely chalcedony, comb and vuggy. Based on its mineral contents and vein deposit types, mineralization at Karang Paningal took place in two stages that was early epithermal process producing comb-vuggy vein deposit and final epithermal deposit retaining chalcedony vein deposit. Zone of prospective mineralization takes place within vein and rocks beneath and above veins
ANALYSIS OF BLAST VIBRATION IMPACT AT PARAMBAHAN COAL MINE, WEST SUMATERA USING SQUARE ROOT SCALED DISTANCE METHOD AGUS NUGROHO; WIROTO WIMBO PRIHONO; TATANG WAHYUDI
Indonesian Mining Journal Vol 9 No 2 (2006): INDONESIAN MINING JOURNAL Vol. 09 No. 2 June 2006
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/imj.Vol9.No2.2006.648

Abstract

Blasting which was conducted at Parambahan produced a series of blast vibrations that might be harmful to human safety and surroundings. Therefore, the vibrations need to be evaluated whether it was over permitted the threshold for human safety or not. One of analysis methods for this purpose is square root scaled distance. The principle of the proposed method is to assess blast vibration impact on the environment for the cases when the blasting for opening mine had been performed previously. Analysis results shows that blast vibrations at Parambahan is below the allowed threshold of blast vibration for environment. Using measurement distance from blast source of 20 to 2,000 m, the lowest measured vibration is 0.18 mm/s and the highest one is 21.0 mm/s. Those mean that blast-generated vibrations at Parambahan are still safe for human and surrounding environment.
STIRRING AND NON-STIRRING METHODS USED TO MAKE SYNTHETIC DOLOMITE-BASED EPSOM SALT TATANG WAHYUDI; BUDHY AGUNG
Indonesian Mining Journal Vol 9 No 1 (2006): INDONESIAN MINING JOURNAL Vol. 09 No. 1 February 2006
Publisher : Balai Besar Pengujian Mineral dan Batubara tekMIRA

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30556/imj.Vol9.No1.2006.654

Abstract

The increasing need of magnesium sulfate heptahidrat by various industries and the limited availabil- ity of this material in nature are two reasons to produce MgSO4.7H2O synthetically. Basically, such a material can be produced from dolomite. A laboratory scale of dolomite-based epsomite making which employed two crystallization processes was conducted. Those were stirring and non-stirring methods and the results showed that stirring one yielded 98.2312 to 98.7244 % MgSO4.7H2O salt. The non-stirring method produced salts of 97.5929 – 99.0378%. Yet prior to salt processing, magne- sium sulfate solution was evaporated at 100 – 110°C to get solution densities around 1.35, 1.38 and1.4 g/ml. The bigger the density the bigger the MgO and SO3 contents