This Author published in this journals
All Journal Jurnal ELTEK
Claim Missing Document
Check
Articles

Found 1 Documents
Search

Desain sistem pengisian daya pada solar e-bike menggunakan metode PI Dyah Intan Sari; Subiyantoro Subiyantoro; Mila Fauziyah
JURNAL ELTEK Vol 19 No 1 (2021): ELTEK Vol 19 No 1
Publisher : Politeknik Negeri Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (422.175 KB) | DOI: 10.33795/eltek.v19i1.275

Abstract

Energi surya dapat digunakan sebagai energi alternatif yang akan dikonversi menjadi listrik untuk mengurangi penggunaan energi fosil menggunakan sel surya. Oleh karena itu sistem pengisian baterai 24V 7.5 AH menggunakan sel surya 30 WP. Keluaran sel surya dipengaruhi oleh intensitas sinar matahari, menyebabkan tegangan dan keluaran sel surya tidak stabil. Maka dilakukan kontrol sehingga tegangan output dari sel surya yang tidak stabil akan diubah menjadi tegangan yang stabil sesuai set point menggunakan kontrol Proportional Integral (PI). Tegangan yang berubah dari sel surya setelah memasuki boost converter stabil pada tegangan 28,8 V. Tuning parameter Proportional Integral (PI) menggunakan metode Ziegler-Nichols 2. Proses penentuan parameter PI Ziegler-Nichols 2 dihitung menggunakan respon yang diatur menggunakan slider gain sehingga respon berosilasi. Didapat nilai konstanta PI terbaik yang diperoleh dari hasil percobaan adalah Kp = 0,128, Ki = 0,12, Parameter dari metode PI ini meliputi rise time 8s, settling time 20s, overshoot 7%, peak time 7,5s dan error steady state 0,6%. Solar energy can be used as an alternative energy which will be converted into electricity to reduce the use of fossil energy using solar cells. Therefore, the 24V 7.5 AH battery charging system uses 30 WP solar cells. The output of solar cells is influenced by the intensity of sunlight, causing the voltage and output of solar cells to be unstable. Then control is carried out so that the output voltage of an unstable solar cell will be converted into a stable voltage according to the set point using Proportional Integral (PI) control. The voltage that changes from the solar cell after entering the boost converter is stable at a voltage of 28.8 V. Tuning the Proportional Integral (PI) parameter using the Ziegler-Nichols 2 method. oscillate. The best PI constant values ​​obtained from the experimental results are Kp = 0.128, Ki = 0.12, The parameters of this PI method include rise time 8s, settling time 20s, overshoot 7%, peak time 7.5s and steady state error 0, 6%.