Article Per Year (5 Year)
p-Index From 2019 - 2024
0.408
P-Index
This Author published in this journals
All Journal Jurnal Manajemen Teknologi dan Teknik Sipil (JURMATEKS)
Syahri Syahri
Faculty of Engineering, Banten Jaya University
Civil Engineering, Building, Construction & Architecture Electrical & Electronics Engineering Engineering Transportation

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

 1 
Kuat Tekan Beton Fc’19 Mpa Menggunakan Campuran Styrofoam Telly - Rosdiyani; Syahri Syahri
Jurnal Manajemen Teknologi & Teknik Sipil Vol 4, No 1 (2021): JUNE
Publisher : Faculty of Engineering, Kadiri University

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2904.863 KB) | DOI: 10.30737/jurmateks.v4i1.1659

Abstract

The selection of concrete constituent materials is something to note, considering that it affects the quality and weight of concrete types. The high density of concrete makes the dead load on the structure large. Styrofoam in the concrete mixture will form cavities, thus reducing the overall weight of concrete and light concrete forms with a smaller volume weight. This study aims to find out the effect of the addition of Styrofoam to the compressive strength and strong bending of concrete. Percentage increase of 0%,5%, 15%, 30%  of concrete volume with a sample count of 3 pieces for each  variation Methods used experimental methods and literature studies. Test results at a concrete age of 28 days showed that the highest compressive strength obtained at a percentage of 5% of 17.78  MPa and a bending force of 2.32  Mpa. A variation of  30%  obtained a compressive strength of 12.97 Mpa and bending strength of 1.98  Mpa with a volume weight of 1881.25 kg/m3  in the categories light concrete. So the greater the addition of Styrofoam, the lower the value of compressive strength and strong bending produced. With that percentage (30%),  it is recommended for non-structural buildings in indoor conditions.
Kuat Tekan Beton Fc’19 Mpa Menggunakan Campuran Styrofoam Telly - Rosdiyani; Syahri Syahri
Jurnal Manajemen Teknologi dan Teknik Sipil (JURMATEKS) Vol. 4 No. 1 (2021): JUNE
Publisher : Kadiri University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.30737/jurmateks.v4i1.1659

Abstract

The selection of concrete constituent materials is something to note, considering that it affects the quality and weight of concrete types. The high density of concrete makes the dead load on the structure large. Styrofoam in the concrete mixture will form cavities, thus reducing the overall weight of concrete and light concrete forms with a smaller volume weight. This study aims to find out the effect of the addition of Styrofoam to the compressive strength and strong bending of concrete. Percentage increase of 0%,5%, 15%, 30%  of concrete volume with a sample count of 3 pieces for each  variation Methods used experimental methods and literature studies. Test results at a concrete age of 28 days showed that the highest compressive strength obtained at a percentage of 5% of 17.78  MPa and a bending force of 2.32  Mpa. A variation of  30%  obtained a compressive strength of 12.97 Mpa and bending strength of 1.98  Mpa with a volume weight of 1881.25 kg/m3  in the categories light concrete. So the greater the addition of Styrofoam, the lower the value of compressive strength and strong bending produced. With that percentage (30%),  it is recommended for non-structural buildings in indoor conditions.
Co-Authors Rosdiyani, Telly