Huda, Feblil
Jurnal Online Mahasiswa (JOM) Bidang Teknik dan Sains

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

Balancing Rotor Dinamik Menggunakan Sinyal Suara Saputra, Ariadi; Huda, Feblil; Akbar, Musthafa
Jurnal Online Mahasiswa (JOM) Bidang Teknik dan Sains Vol 5, No 1 (2018): Wisuda April Tahun 2018
Publisher : Jurnal Online Mahasiswa (JOM) Bidang Teknik dan Sains

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Rotating machines that have been operating within a certain period of time there is frequent vibration. The vibration is usually caused by unbalance, misalignment, bearing defect, and others. Unbalance is ranked as a first cause of vibration, which more than 80% cases of vibration caused by unbalance. This condition causes the balancing process needs to be done. A commonly method of vibration measurement uses vibration sensors such as accelerometer or vibrometer, that should be affixed to the machine in operation. This can cause discomfort and may even dangerous the operator when measuring the machines. The solution of the problem can be done using non contact measurement, where the sensor is not attached directly to the test equipment. Microphone is a device that can record the sound signal without necessarily contact the tested device. The unbalance tendency of the test is characterized by the presence of the dominant frequency at one rotational speed (1 x rpm). From the test, the result of balancing of normal condition on one rotor and two rotors are 0.039 V and 0.031 V with balancing efficiency 87.88% and 80.74% respectively. The addition of unbalance mass on one rotor and two rotors is obtained balancing result of 0.031 V and 5.88x10-3 V with efficiency balancing of 93.58% and 97.43% respectively.Keywords : voice signal, unbalance, balancing, microphone, unbalance mass
Pengujian Getaran Massa Tidak Seimbang Menggunakan Accelerometer Adxl 335 Dengan Arduino Perdana, Ade Wahyu; Huda, Feblil; Utomo, Sapdo
Jurnal Online Mahasiswa (JOM) Bidang Teknik dan Sains Vol 5 (2018): Edisi 2 Juli s/d Desember 2018
Publisher : Jurnal Online Mahasiswa (JOM) Bidang Teknik dan Sains

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Machines that operate under certain conditions will experience a performance degradation that will cause vibration, one of which is caused by unbalance symptoms. Machines with unbalance conditions that occur under safe conditions can damage components in a machine. One of them is the damage to the bearing and the entire shaft system of a machine. Efforts to overcome this matter required preventive maintenance with the contact measurement method by attaching a vibration sensor in the form of an ADXL335 accelerometer with the help of Arduino. Accelerometer ADXL335 is attached to the engine component that is operating with the sensor output measurement in the form of vibration signal amplitude. The unbalance indication of the test is characterized by the presence of the dominant frequency at one rotational speed (1xRPM). From the test, the result of balancing of normal condition in one rotor are 0.0165 G with balancing efficiency 78.47 %. The addition of unbalance mass on one rotor obtained balancing result that is 0.01593 G with efficiency of balancing respectively 78.09%.Keywords: vibration signal, unbalance, balancing, Accelerometer, Arduino, ADXL335, unbalance mass