Journal of Engineering and Technological Sciences
Vol. 47 No. 6 (2015)

Analysis of the Strength of Timber and Glulam Timber Beams with Steel Reinforcement

Arie Putra Usman (Civil Engineering Study Program, Faculty of Civil Engineering & Enviromental, Bandung Institute of Technology,)
Saptahari Sugiri (Institut Teknologi Bandung, Jalan Ganesa 10, Bandung 40132)



Article Info

Publish Date
31 Dec 2015

Abstract

Indonesia is a tropical country with abundant tropical timber that can be used as a building material. Wood is a renewable material, thus making it an environmentally friendly construction material. However, the dimensional limitations of solid wood may pose problems in structural constructions. Wood material also has some disadvantages, such as brittle failure. However, the ductility of wood can be increased because of plasticity occurring in the compression zone. Wood material with good ductility can be obtained by reinforcing it in the tensile zone. This study is about the strength of wood material for use as a material for structural elements. Based on the analytical findings, the bending capacity of wood can be improved by adding reinforcements to the tensile zone.

Copyrights © 2015






Journal Info

Abbrev

JETS

Publisher

Subject

Engineering

Description

Journal of Engineering and Technological Sciences welcomes full research articles in the area of Engineering Sciences from the following subject areas: Aerospace Engineering, Biotechnology, Chemical Engineering, Civil Engineering, Electrical Engineering, Engineering Physics, Environmental ...