Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

IJTI (International Journal Of Transportation And Infrastructure)

ijti
Website

Published by Universitas Narotama Surabaya

ISSN : 25974734 EISSN : 25974769 DOI : -

Core Subject : Engineering,

Civil Engineering, Building, Construction & Architecture Transportation

Arjuna Subject : -

Articles 76 Documents

1 2 3 4 5

Case Study On Use Area Parking At New Market City Shopping Center Bogor Syaiful Syaiful; Yena Elvira
IJTI International Journal of Transportation and Infrastructure eISSN 2597-4769 pISSN 2597-4734 Vol 1 No 1 (2017): September 2017
Publisher : NAROTAMA UNIVERSITY, Indonesia

New Market City Shopping Bogor is a research object to the availability of parking areas. Perception assessment of park users to park a distance of 42.86% with a distance of> 200 m, the distance is very great influence in determining the parking area. Difficulty entering the parking structure also affects the level of parking services at 39.52%. Level of difficulty occurs because the road to the parking lot filled with public transportation that stops in the place.

The Development of the Central Business District (CBD) Based on Public-Private Partnership Agus Sukoco; M Ikhsan Setiawan; Iswachyu Dhaniarti; Cholil Hasyim
IJTI International Journal of Transportation and Infrastructure eISSN 2597-4769 pISSN 2597-4734 Vol 1 No 1 (2017): September 2017
Publisher : NAROTAMA UNIVERSITY, Indonesia

This research aims to develop a model of the development of the Central Business District (CBD) based on Public-Private Partnership. Objective is (1) To design a development model Central Business District-based public-private partnership (public-private partnership) through case studies in Surabaya (Suramadu Surabaya side managed by Badan Pengembangan Wilayah Suramadu), (2) Develop a feasibility analysis of the technical-economical (feasibility study) the development of Business Central District-based public-private partnership (public-private partnership) in Surabaya (Suramadu Surabaya side) managed by the BadanPengembangan Wilayah Suramadu, by mapping, identification-evaluation of the obstacles encountered, opportunities and strategies and formulations can be developed. Lease (HGB) 30 year Rp.500.000 /m2/yr; Sales 80%; Sales price /m2Rp. 15,000,000 /m2 (up 10%/yr); Management & Rental Public Facility 5% of sales revenue. Based on the analysis of the feasibility of investment in the CBD area pessimistic conditions, showed decent results with NPV Rp. 7,152,755,613,547, IRR 14.34%, 1.37 PI and PBP 17 years.

The Experimental Study Of Wekondo Materialsplite And Sand Of Poni-Poniki District Tirawuta East Kolaka Regency As Material Of Concrete Making Mansyur Mansyur
IJTI International Journal of Transportation and Infrastructure eISSN 2597-4769 pISSN 2597-4734 Vol 1 No 1 (2017): September 2017
Publisher : NAROTAMA UNIVERSITY, Indonesia

Split Material derived from Wekondo and Sand found in Poni-Poniki is an abundant material that has the potential to be used as a material for making concrete. The purpose of this research is to find out whether Wekondo split material and Poni-poniki sand can be used in making concrete both in terms of material characteristics and the quality of concrete achieved. This research is experimental by testing material characteristics as well as the making of 150 mm sized concrete cube test object on applicable SNI. The result of the test of the characteristic of Split material such as filter analysis at # 3/8 exceeds the specification of 6.25%, aggregate wear19,639%, pass filter sieve # 200 is 0.772%, specific gravity (SSD) 2,913 gr / cm3, 1.363%, 0.628% moisture content of 1.7kg / ltr solid content and 1.469kg / ltr of loose fill weight. While the examination of a sand material of Poni-poniki analyzed sieve all meet the standard specification, pass filter sieve # 200 is 1,680%, density of 2.661 gr / cm3, aggregate 1.647%, moisture content 0.580%, / ltr the loose weight of 1.531kg / ltr. While in concrete compressive strength test, the age of 7 days is 203,68 kg / cm2, and age 28 day is 257,55 kg / cm2. From the results of the study showed that the compressive strength at the age of 28 days can achieve K-250 quality.

THE CONTROL AND MANAGEMENT OF RAW MATERIAL RESOURCES IN MAINTAINING THE PRODUCTION DIVISIONS OF BANANA CAKRA BAWANA PASURUAN Mukayati Mukayati
IJTI International Journal of Transportation and Infrastructure eISSN 2597-4769 pISSN 2597-4734 Vol 1 No 2 (2018): March 2018
Publisher : NAROTAMA UNIVERSITY, Indonesia

Every company either a service company or a manufacturing company must have the same goal of earning profit. But to achieve that goal is not easy because it is influenced by several factors, and the company must be able to handle these factors. One of the factors that affect the problem is the smoothness of production. The production problem is a very important problem for the company because it is very influential on the profits obtained by the company. If the production process runs smoothly then the company's goal can be achieved, but if the production process does not run smoothly then the company's goals will not be achieved. While the smoothness of the production process itself is influenced by the presence or absence of raw materials will be processed in production.

POLAR STORAGE METHOD AS ONE QUALITY CONTROL OF RAW MATERIAL FEEDBACK Prama Wildan Ardiansyah
IJTI International Journal of Transportation and Infrastructure eISSN 2597-4769 pISSN 2597-4734 Vol 1 No 2 (2018): March 2018
Publisher : NAROTAMA UNIVERSITY, Indonesia

In today's economic development where the business world is growing rapidly, the employers are required to work more efficiently to deal with the tightness of business competition in Indonesia. The continuity of the production process within a company will be influenced by various factors including: Capital, Technology, raw material inventory, finished goods inventory and labor. In addition, the production process must be supported by a good raw material storage process as well.

BEST RAW MATERIAL STORAGE METHOD FOR KEEPING QUALITY OF FOOD PRODUCTION Vincent Audi Santoso
IJTI International Journal of Transportation and Infrastructure eISSN 2597-4769 pISSN 2597-4734 Vol 1 No 2 (2018): March 2018
Publisher : NAROTAMA UNIVERSITY, Indonesia

Food is a basic human need that is needed at all times and requires good and proper management in order to benefit the body. According to WHO, the intended food is: “Food include all substances, whether in a natural state or in a manufactured or preparedform, wich are part of human diet.”These food restrictions do not include water, medicines and substances needed for medicinal purposes.

THE PRODUCTION PROCESS ACTIVITIES, DISTRIBUTION NETWORK AND POTENTIAL CONSUMPTION OF LOCAL FOOD Lufita Widiana
IJTI International Journal of Transportation and Infrastructure eISSN 2597-4769 pISSN 2597-4734 Vol 1 No 2 (2018): March 2018
Publisher : NAROTAMA UNIVERSITY, Indonesia

In the essence to meet the economic needs, there must be goods and services. The goods and services as a means of satisfying the needs that must be held or made (in production). After the goods and services are created or manufactured, these goods and services must be distributed to the community as users or consumers of the goods and services.

THE PRODUCTION PROCESS OF TOFU USING RAW MATERIALS TO KEEP QUALITY Adi Wicaksono; Dian Yuguslavia
IJTI International Journal of Transportation and Infrastructure eISSN 2597-4769 pISSN 2597-4734 Vol 1 No 2 (2018): March 2018
Publisher : NAROTAMA UNIVERSITY, Indonesia

Indonesia is a tropical country where many communities work as farmers by using fertile soil. One of them is soybeans, soybeans can be processed into various foods and beverages, such as tofu, tempe and soybean juice. There are various methods of soybeans process, so that the quality is also various. Quality is the totality of facilities and characteristics of products or services that meet the needs, expressed or implied (Loh, 2001: 35). One of the most favorite foods of Indonesian people is tofu.

CONTROL METHOD OF PALM OIL’S RAW MATERIALS SUPPLIES TO GUARANTEE THE QUALITY OF THE PRODUCT Andira Puspita; Yuni Rahmawati
IJTI International Journal of Transportation and Infrastructure eISSN 2597-4769 pISSN 2597-4734 Vol 1 No 2 (2018): March 2018
Publisher : NAROTAMA UNIVERSITY, Indonesia

The current economy has grown rapidly, along with the rapidly growing of Science and Technology (IPTEK). So the competition between companies becomes increasingly tight. The increasingly tight competition of the company encourages each company to determine the selection of raw material inventory appropriately so that the company can still exist in order to achieve its desired goals.

Air inflated Greenhouse As Urban Farming Facilities: Architectural Overview Syed Zainol Abidin; Ronny D. Nasihien; Hery Budiyanto
IJTI International Journal of Transportation and Infrastructure eISSN 2597-4769 pISSN 2597-4734 Vol 1 No 1 (2017): September 2017
Publisher : NAROTAMA UNIVERSITY, Indonesia

Urban Farming utilizing land intensification, in order to meet the needs of fresh vegetables and fruits everyday for the community residential / housing in urban areas. Air Inflated Greenhouse as urban farming facilities, can be built and transferred to a residential location / specific housing is easy, safe, fast and lightweight (0,55mm PVC tarpaulin) so that urban farming products closer to consumers in urban settlements, the price impact getting cheaper, but quality. Long-term goal is to develop prototype Air inflated Greenhouse as facilities Urban Farming which fulfills the power, speed, effectiveness, comfort and encourage crops of fruit / vegetable hydroponic hygienic, cheap and profitable, so that the product Air Inflated Greenhouse automatically support an increase in food production, specific target is the availability prototype Air Inflated Greenhouse as Urban Farming facility in order to increase productivity of crops of fruit / vegetable hydroponic hygienic, cheap and profitable, so the high prospects for mass production by SMEs Partners to meet national food requirements. Methods using methods Experiments and Action Research, beginning with the development of design, manufacture, testing and repair of prototype Air Inflated Greenhouse includes (1) a test of strength and endurance of materials Air Inflated Greenhouse to the weather, (2) test material Air Inflated Greenhouse most effective as a component of the structure, (3) test the speed of manufacture, transport, assembly, installation, dismantling Air Inflated Greenhouse, (4) test the temperature, humidity and air pressure in the Air Inflated Greenhouse.

Page 1 of 8 | Total Record : 76

1 2 3 4 5

Filter by Year

2022 2022

Filter By Issues

All Issue Vol 6 No 1 (2022): September 2022 Vol 5 No 2 (2022): March 2022 Vol 5 No 01 (2021): September 2021 Vol 4 No 2 (2021): March 2021 Vol 4 No 1 (2020): September 2020 Vol 3 No 2 (2020): March 2020 Vol 3 No 1 (2019): September 2019 Vol 2 No 2 (2019): March 2019 Vol 2 No 1 (2018): September 2018 Vol 1 No 2 (2018): March 2018 Vol 1 No 1 (2017): September 2017 More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota surabaya,

Jawa timur

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location Kota surabaya, Jawa timur INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota surabaya,

Jawa timur

INDONESIA