Claim Missing Document
Check
Articles

Found 19 Documents
Search

PERANCANGAN JARINGAN FIBER TO THE HOME (FTTH) BERTEKNOLOGI GIGABIT PASSIVE OPTICAL NETWORK (GPON) DI PERUMAHAN CITRALAND PALU Toago, Sembara P.; Alamsyah, Alamsyah; Amir, Ardi
-
Publisher : MEKTRIK

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Abstract This research is aimed at how to design network system fiber to the home with the technology of GPON, analize fiber to the home with GPON technology implements, evaluate the use of technology as GPON access device in channeling triple play service, and make the planning design of fiber to the home. This research was conducted in residential Citraland Palu at Trans Sulawesi Tondo. From the results of this research obtained link power budget calculation, including loss fiber = 3.8815 dB, loss connected = 0.6 dB, loss connector = 0.8 dB, the recive signal power = 8,95 x 10-6 Watt, dan S/N = 1.157 x 10-10 A. While for the calculation of damping in every housing average by 22.9901 dB, while the lowest damping is 22.7874 dB, and the higest is 23.0566 dB. While in the planning design of these network is needed 1 GPON OLT, 1 device, 1 piece of ODC Passive Spiltter dengan with configuration 1:4 on the ODC, 61 piece Passive Spiltter with configuration 1:8 on the ODP, 61 ODP’s devices with 12 port  in every device 480  devices of ONU.   Keywords: FTTH (Fiber To The Home), GPON, Fiber Optic, Passive splitter.
SISTEM PENYAMBUNGAN DIGITAL PADA STDI 1 KANDATEL UJUNG PANDANG Amir, Ardi
SMARTek Vol 9, No 3 (2011)
Publisher : SMARTek

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (275.582 KB)

Abstract

Kemajuan teknologi elektronika dan telekomunikasi menjadikan dunia semakin kecil saja.Denyut kehidupan dan segala aktifitas yang menyangkut hajat modern di suatu belahandunia, dengan sekejab dapat diketahui sambil dikagumi masyarakat dunia lainnya. Dandampak daripadanya harus segera dijawab oleh para pengelola jasa telekomunikasi disemuaNegara termaksud Indonesia.Dengan menggunakan rangkaian elektronik terintegrasi skala besar dengan menggunakanprinsip Time Division Multiplex, Switching Network ( SN ) digital yang hanya memerlukan ruanganyang sedikit. Pada sentral EWSD, Switching Network memakai system penyambungan dengankecepatan tinggi, Switching Network mempunyai bentuk yang padat yang dapat menampungnomor yang besar yang dikonsentrasikan dalam modul yang sedikit. Misalnya untuk melayani1024 percakapan secara simultan dilayani oleh sebuah Space Stage Modul.Sentaral telepon digital diarahkan untuk menyambut era ISDN ( Integrated Service DigitalNetwork ) atau Jaringan Digital Pelayanan Terpadu, dan hal ini tidak terdapat pada jaringananalog. Era ISDN merupakan cita – cita yang akan mempermudah dan mempermurah jasatelekomunikasi. Dengan pengguna telepon yang meningkat, diharapkan perekonomian diIndonesia akan meningkat pula.
JARINGAN TEKNOLOGI FATMA PADA SISTEM KOMUNIKASI SATELIT PERMINYAKAN (SKSP) PERTAMINA UPPDN VII MAKASSAR Amir, Ardi
MEKTEK Vol 14, No 2 (2012)
Publisher : MEKTEK

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (323.457 KB)

Abstract

FATMA Technology (Frequency And Time Multiple Access) is a form of progress of FDMA and TDMA are combined into one in which on one network can use up to 32 carrier frequencies (frequency division), and on each carrier should ideally be occupied by 32 nodes / stations simultaneously (time division).Technology in Indonesia Fatma access methods specifically used by Pertamina Oil Satellite Communication System (SKSP) in order to better communication between and among all units of the existing branches. In this study conducted an analysis of a network using the system point to point communication link between one point with another point of direct and multi-point systems and communication links with the mesh provided by ACT-ONE modem that uses Fatma. The pattern of relationships / mesh topology is that each station can be connected directly by using a single hop.Selain was also described on network analysis.
PERENCANAAN KONFIGURASI JARINGAN KOMUNIKASI LTR EF. JOHNSON Amir, Ardi
MEKTEK Vol 8, No 2 (2006)
Publisher : MEKTEK

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (269.591 KB)

Abstract

System of Communications of Radio Trunking exploiting system of Logic Trunked Radio where providing communications system make a move the goodness in one way, and also communications system two direction with the operating system of conventional and Trunking System.Use of system LTR for the communications of land enviroment of Airport can lessen the frequency use, so that do not bother the system of communications navigasi in airport.
PEMANCAR AM STEREO Amir, Ardi
MEKTEK Vol 13, No 2 (2011)
Publisher : MEKTEK

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (338.434 KB)

Abstract

In this project created an AM STEREO transmitter that the signal can be received on receiving AM MONOand AM STEREO. To obtain broadcast quality, should be using the receiver AM STEREO. The advantages ofthis transmitter broadcasts a bit cleaner when compared with AM MONO, but the transmitter AM STEREOwas not hifi when compared with STEREO FM transmitter. Transmitter consists of four sections of the mostimportant are:-Isolator-Matrix Audio-Phase Modulator-Amplitude Modulator
PEMODELAN DAN PENGENDALIAN MOTOR DC MENGGUNAKAN SIMULASI MATLAB Arifin, Yusnaini; Amir, Ardi
MEKTEK Vol 12, No 2 (2010)
Publisher : MEKTEK

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (168.472 KB)

Abstract

This study aimed to see how the response changes in the speed DC motor and the armature current at the time of starting and stopping. The method used is a simulation using matlab software. By using the data specification n =ωDripproof type DC motors as well as testing the obtained value of ωn =55.44 rad / sec and ξ =0.3518. Because value ξ smaller than one, then the DC motor has a characteristic of less damped (underdamped).
STUDI PEMAHAMAN BLOK RANGKAIAN PENERIMA PADA TELEVISI TRAINER Amir, Ardi
MEKTEK Vol 13, No 3 (2011)
Publisher : MEKTEK

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1445.72 KB)

Abstract

"Television" is no longer a novelty to the community, especially the urban areas. At first only intended as amedium of television to broadcast information and entertainment that comes with moving images such as ascene. However the line with technological developments lead to the use of television not only as the meansmentioned above. Today television is also used as an advertising medium, video games, computer monitorsand others. Ukurannyapun been diverse, ranging in size from big screen to small screen size.Therefore it is no exaggeration to say that television is very useful trainer for anyone who wants to knowmore about a television set, because the TV Trainer can be known about a block diagram, the workings ofeach block and the damage that occurs if visible symptoms are not normal in a television receiver
PERENCANAAN KONFIGURASI KOMUNIKASI DARAT TERPADU Amir, Ardi
FORISTEK : Forum Teknik Elektro dan Teknologi Informasi Vol 1, No 2 (2011)
Publisher : FORISTEK : Forum Teknik Elektro dan Teknologi Informasi

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (358.877 KB)

Abstract

Switching process with the utilization of system LTR (Logic Trunked Radio) begins with the handshake between the mobile data with a repeater which ensures that the signaling does not occur on the wrong channel and prevents mobile with a strong signal using a channel that has been unused. Determination of the use of home repeater and channel ID in terms of flight safety and interests of users with uniformity throughout the airport which is determined by radio trunking operator. In terrestrial communication systems integrated with EF LTR. Johnson's lines of communication that is formed resembles the organizational structure chart so easily developed and communication links between the parts can be easily arranged.   Keyword : radio trunked Logic, home repeater.
PERANCANGAN DAN PENERAPAN SISTEM KONTROL PERALATAN ELEKTRONIK JARAK JAUH BERBASIS WEB Alamsyah, Alamsyah; Amir, Ardi; Faisal, Muhammad Nur
Jurnal MEKANIKAL Vol 6, No 2 (2015): JM Vol. 6 No. 2 Juli 2015
Publisher : Jurnal MEKANIKAL

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (637.939 KB)

Abstract

Pada penelitian ini dirancang dan dibangun sebuah mini plant untuk memodelkan bangunan dan kelengkapan rumah yang terdiri dari peralatan elektronik, seperti kipas, TV, AC, dan lampu listrik. Sistem pengendalian peralatan elektronik jarak jauh berbasis web ini dirancang secara nirkabel (wireless) dengan memanfaatkan teknologi internet. Data keluaran device (peralatan elektronik) di kendalikan oleh driver relay yang selanjutnya dikirim melalui komunikasi paralel (port paralel) yang dihubungkan ke komputer server sehingga dapat ditampilkan ke halaman web user. Pada pengujian perangkat keras diperoleh hasil pengukuran rangkaian driver relay pada saat port paralel baik pada logika 0 atau 1 adalah tegangan Vcc sebesar 11,93 volt. Untuk pengujian rangkaian driver relay didapatkan hasilnya bahwa pada saat saat  transistor  aktif (saturasi) nilai tegangan relay sebesar 11,61 volt, sedangkan pada saat saat  transistor  tidak aktif (cut off) nilai tegangan relay sebesar 0 volt. Hal ini menunjukkan sudah sesuai dengan spesfikasi skema pada rangkaian driver relay. Sedangkan pengujian yang dilakukan pada port paralel untuk menghasilkan nilai data biner dengan memasukkan data desimal ke sistem sebanyak empat kali pengujian dengan memberi nilai masukan data desimal 10, 15, 127, dan 160  hasilnya sama dengan yang ditampilkan oleh keluaran port paralel.
RANCANG BANGUN SISTEM INFUS CERDAS Hamzah, Hamzah; Amir, Ardi; S. Pirade, Yulius; Masarrang, Maryantho
Foristek Vol. 11 No. 1 (2021): Foristek
Publisher : Foristek

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (788.509 KB) | DOI: 10.54757/fs.v11i1.30

Abstract

The rapid development of the world of technology that covers almost all sides of life has encouraged innovation and human creation to make various tools with automatic work systems. Giving fluids using intravenous fluids is one way to enter fluids intravenously to meet the needs of fluids, electrolytes, drug administration, and feeding. The process of replacing intravenous fluids that has reached the minimum replacement limit must be carried out promptly and quickly, so that there will be no delay in changing intravenous fluids which will result in unstable pressure on the infusion set which will result in blood clots.In its testing, this tool can display information on the total number of intravenous fluid drops, and the condition of the remaining infusion fluid level on the LCD, as well as an additional display of the number of intravenous fluid drops per minute on theapplications client PC and / or smartphone. Adjusting the position of the mini servo of the infusion tap, can be adjusted when the appliance is not or not connected to the client. The sensor optocoupler used can also detect every drop of intravenous fluid. The reading of the sensor optocoupler used can experience an error by a difference of 100% if the dripping of the intravenous fluid is too slow. This is caused by the drip that is read twice by the sensor because one drop of intravenous fluid is read again after more than 50 milli second.Key words: microcontroller, nodemcu esp8266, optocoupler, load cell, mini servo sg90, smart infusion.