Claim Missing Document
Check
Articles

Found 2 Documents
Search

Analisis Perbandingan Inverter Satu Phasa PWM dan SPWM dengan Trafo Ikhsan Hidayat; Al Mahdali; Moh Afandy
Jambura Journal of Electrical and Electronics Engineering Vol 4, No 1 (2022): Januari - Juni 2022
Publisher : Teknik Elektro - Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (657.441 KB) | DOI: 10.37905/jjeee.v4i1.11900

Abstract

Riset ini membandingkan masukan sinyal PWM dan SPWM  untuk mendapatkan THD yang rendah, dan juga terkait efek dari teknik modulasi dan jumlah pulsa pada disipasi daya rendah yang terdapat pada inverter satu phasa. Inverter satu phasa diberikan masukan pulsa menggunakan PWM (Pulse Width Modulation),  dan SPWM (Sinusoidal Pulse Width Modulation) dalam bentuk gelombang persegi (kotak) yang dipasangkan dengan filter LCL yang sesuai, kemudian menghasilkan desain rangkaian inverter yang memiliki THD (Total Harmonic Distortion) yang rendah dan efisiensi tinggi. Transformator digunakan untuk meningkatkan tegangan sumber masukan yang semula 48 Volt menjadi 220Volt (Untuk alat elektronik skala rumahan) juga disebutkan dalam penelitian ini. Hasil percobaan simulasi dari analisis perbandingan antara inverter satu phasa PWM dengan inverter satu phasa SPWM maka didapatkan bahwa model inverter teknik PWM (switching gelombang kotak) dapat meminimalisir harmonisa hingga mendekati 1.8 %.
RANCANG BANGUN SISTEM KONTROL MINIATUR ALAT PEMINDAH MATERIAL PADA PROSES DISTRIBUSI BIJIH NIKEL MENGGUNAKAN PLC Abdul Haris Mubarak; Moh Afandy; Muhammad Khaidir
Jambura Physics Journal Vol 5, No 1 (2023): April 2023
Publisher : Universitas Negeri Gorontalo

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.34312/jpj.v5i1.18466

Abstract

This research aims to make a miniature ore material transfer tool automatically using Omron PLC. The way this tool works is that when the start button is pressed, motor 1 will move the apron containing the ore to be taken to the 3 storage barrels to be filled alternately. In each storage barrel, a proximity sensor is installed to detect the level of ore filling. On the rails that are passed by the apron, there are three limit switches that serve as indicators that the position of the apron is right above the storage barrel, then motor 2 will open the valve on the apron so that the ore on the apron falls into the reservoir. From this research, we have succeeded in obtaining an automatic control system for a miniature material transfer device in the ore distribution process.