Ade Saputra Ade Saputra
Unknown Affiliation

Published : 2 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 2 Documents
Search

PROSES PENGERINGAN LARUTAN AMONIUM DIURANAT (ADU) MENGGUNAKAN SPRAY DRYER DR-1100 Agus Sartono Sartono Dwi Susanto; Dede Sutarya Dede Sutarya; Ade Saputra Ade Saputra
PIN Pengelolaan Instalasi Nuklir Vol 11, No 21 (2018): Oktober 2018
Publisher : PIN Pengelolaan Instalasi Nuklir

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (10390.615 KB)

Abstract

ABSTRAK ─ Proses pengeringan amonium diuranat (ADU) di laboratorium Pilot Conversion Plant (PCP) dilakukan menggunakan Spray Dryer DR-1100. Proses ini bertujuan untuk memperoleh serbuk ADU kering yang dapat diproses lebih lanjut menjadi serbuk U3O8 dan UO2. Untuk memperoleh parameter operasi yang optimal maka perlu dipahami karakter peralatan spray dryer DR-1100 melalui beberapa kali running proses pengeringan. ADU sebagai umpan proses diperoleh dari hasil pengendapan larutan uranil nitrat dengan ammonium hidroksida yang kemudian dipisahkan dengan sentrifuge dan dikeringkan dengan spray dryer setelah dicuci menggunakan air bebas mineral. Pengeringan dilakukan pada suhu 220°C dengan kecepatan putar atomizer 15.000 - 20.000 rpm, hasil yang diperoleh ditentukan oleh konsentrasi padatan umpan dan kecepatan pengumpanan. Perbedaan temperatur udara masuk dan keluar dapat digunakan sebagai acuan untuk mengetahui seberapa besar air yang dapat teruapkan sehingga diperoleh serbuk ADU kering. Hasil yang diperoleh dari proses yang dilakukan menunjukan bahwa perbedaan temperatur antara input dan output pada kisaran 100°C dan putaran atomizer 20.000 rpm menghasilkan serbuk ADU kering yang diharapkan untuk diproses ke tahapan berikutnya. Kata Kunci – Spray dryer, proses pengeringan, amonium diuranat.  ABSTRACT ─ The drying process of ammonium diuranate (ADU) in the Pilot Conversion Plant (PCP) laboratory was carried out using the Spray Dryer DR-1100. This process aims to obtain dry ADU powder which can be further processed into U3O8 and UO2 powders. To obtain optimal operating parameters, it is necessary to understand the character of the spray dryer DR-1100 through several times running the drying process. ADU as process feed was obtained from the deposition of uranyl nitrate solution with ammonium hydroxide which was then separated by centrifuge and dried with a spray dryer after washing using mineral-free water. Drying is carried out at a temperature of 200-250°C with an atomizer rotating speed of 15,000 - 20,000 rpm, the results obtained are determined by solid concentration and feed speed. The difference in the temperature of the air in and out can be used as a reference to find out how much water can be evaporated so that the ADU powder is dried. The results obtained from the process carried out indicate that the temperature difference between the input and output is around 100°C and the atomizer rotation of 20,000 rpm produces expected  dry ADU powder to be processed to the next stage. Keywords – Spray dryer, drying process, ammonium diuranate.
PENDAYAGUNAAN UNIT PELARUTAN YELLOW CAKE PILOT CONVERSION PLANT (PCP) SEBAGAI EVAPORATOR CAIRAN LIMBAH URANIUM Ade Saputra Ade Saputra; Yatno Dwi Agus Susanto; Hanif Ghufron Hanif Ghufron; Anita Sari Sari
PIN Pengelolaan Instalasi Nuklir Vol 12, No 23 (2019): Oktober 2019
Publisher : PIN Pengelolaan Instalasi Nuklir

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

ABSTRAK - Limbah cair atau efluen hasil samping proses pemurnian di PCP masih memiliki kadar uranium sebesar ± 20 gU/liter. Kadar tersebut terlalu tinggi untuk dijadikan limbah dan dikirim ke Pusat Teknologi Limbah Radioaktif (PTLR), namun tidak ekonomis jika langsung diproses di PCP sebagai umpan proses pemurnian. Oleh karena itu perlu dilakukan proses evaporasi sehingga uraniumnya dapat dipunggut kembali sebagai ekstrak dan kondensatnya dapat di kirim ke PTLR sebagai limbah. Pembuatan unit evaporator baru untuk mengolah limbah akan membutuhkan biaya tinggi sehingga pendayagunaan unit pelarutan yellow cake sebagai evaporator perlu dilakukan. Proses pendayagunaan unit pelarutan yellow cake meliputi proses utilisasi sistem pemipaan tangki pelarutan dan percobaan evaporasi limbah efluen secara batch menggunakan unit pelarutan yellow cake untuk mengetahui unjuk kinerja proses evaporasi. Unit pelarutan yellow cake dapat didayagunakan sebagai sistem evaporator dengan memodifikasi sistem pemipaan untuk mengurangi volume limbah cair uranium di PCP dengan kapasitas ± 80 liter/jam dengan kadar uranium di kondensat sebesar ±10 ppm dan mendekati baku tingkat radioaktivitas yang ditetapkan BAPETEN. Kata Kunci - Evaporasi, Pendayagunaan, Pelarutan, Limbah, Uranium   ABSTRACT - Liquid waste or effluent by product of the purification process at PCP, still has uranium content about ± 20 gU/liter. The level was too high as waste and sent to The Radioactive Waste Technology Center (PTLR), but it is not economical if it is processed at PCP as a feed for the purification process. Therefore it is necessary to do the evaporation process so that the uranium can be extracted as an extractant and the condensate can be sent to the PTLR as waste. The build up of a new evaporator unit to process waste will be high cost, so that utilization of yellow cake dissolution unit as an evaporator is carried out. The utilization of the yellow cake dissolution unit includes the utilization of the piping system and evaporation experiment to determine the performance of the evaporation process. Yellow cake dissolution unit can be utilized as an evaporator system by modifying the piping system to reduce the volume of uranium liquid waste in PCP. The capacity is about ± 80 liters / hour for uranium concentration in the condensate about ± 10 ppm and approaching the radioactivity level has determined by BAPETEN. Keywords - Evaporation, Utilization, Dissolution, Waste, Uranium