Garuda - Garba Rujukan Digital

Konstruksi Tiang Penyangga Panel Surya Pada Gereja Ollon Limbran Sampebatu
Literasi: Jurnal Pengabdian Masyarakat dan Inovasi Vol 2 No 2 (2022)
Publisher : Pengelola Jurnal Politeknik Negeri Ketapang

Poles are one of the important equipment in the construction of a PLTS. The pole is the main support for the solar panel which must be positioned so that the solar panel can be exposed to sunlight in a perfect position. This support pole can be made of wood or of iron / steel. The requirements for a support pole used to support solar panels are to have high mechanical strength, have a long life, easy to install and cheap to maintain, not too heavy, low price, attractive appearance, easy to remove and reinstall. Wooden poles are widely used as a support for solar panels because of their simple construction and lower investment costs. However, the weakness of this wooden pole is that it is very dependent on the existing wood supply, needs preservation first, shorter service life, and cannot safely support the load. Steel poles are widely used because of their sturdier construction, straighter and more beautiful shape than wooden poles. However, considering the location of the service which is quite difficult to reach by vehicle, it hinders the transportation of iron/steel poles to the service location. So that the pole used as a support pole is a wooden pole that has been preserved first.

PEMASANGAN TIANG PENYANGGA PANEL SURYA PADA GEREJA OLLON Limbran Sampebatu
JIPAM : Jurnal Ilmiah Pengabdian kepada Masyarakat Vol. 1 No. 3 (2022): JIPAM : Jurnal Ilmiah Pengabdian kepada Masyarakat
Publisher : STAI Darul Qalam Tangerang

Poles are one of the important equipment in the construction of a PLTS. The pole is the main support for the solar panel which must be positioned so that the solar panel can be exposed to sunlight in a perfect position. This support pole can be made of wood or of iron / steel. The requirements for a support pole used to support solar panels are to have high mechanical strength, have a long life, easy to install and cheap to maintain, not too heavy, low price, attractive appearance, easy to remove and reinstall. Wooden poles are widely used as a support for solar panels because of their simple construction and lower investment costs. However, the weakness of this wooden pole is that it is very dependent on the existing wood supply, needs preservation first, shorter service life, and cannot safely support the load. Steel poles are widely used because of their sturdier construction, straighter and more beautiful shape than wooden poles. However, considering the location of the service which is quite difficult to reach by vehicle, it hinders the transportation of iron/steel poles to the service location. So that the pole used as a support pole is a wooden pole that has been preserved first

PENGUJIAN SENSITIVITAS DAN AKURASI SENSOR ARUS HALL EFFECT MENGGUNAKAN ARDUINO-UNO Limbran Sampebatu; Simon Patabang; Jeremias Leda
Jurnal Taguchi : Jurnal Ilmiah Teknik dan Manajemen Industri Vol. 2 No. 2 (2022): Jurnal Taguchi : Jurnal Ilmiah Keilmuan Teknik dan Manajemen Industri
Publisher : LPPM Universitas Bina Bangsa

The sensitivity and accuracy of the hall effect current sensor is an important factor in its application considering that electric current is the main parameter in the study of electrical energy engineering, telecommunications and electronics. However, on the other hand, studies related to the sensitivity and accuracy of Hall effect current sensors are still rarely carried out. The method used in this research is an experimental laboratory study using the ACS712 sensor with a variation rating of 5A, 20A and 30A. The results show that the sensitivity is inversely proportional to the ampere rating of the ACS712 sensor where the greater the current rating of the sensor, the lower the sensitivity. While the accuracy is directly proportional to the ampere rating of the ACS712 sensor where the greater the current rating of the sensor, the more accurate the sensor is

Analisa Potensi Penggunaan PLTS On Grid di Kota Makasar Simon Patabang; Limbran Sampebatu; Aries Kamolan
Jurnal Ampere Vol. 8 No. 1 (2023): JURNAL AMPERE
Publisher : Universitas PGRI Palembang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31851/ampere.v8i1.10958

Makassar is the center of government and business center in the province of South Sulawesi. The people of Makassar has a very high dependence on the use of electrical energy to meet their daily needs, both at home and at offices. The use of electrical energy which is quite high will cause an increase in customer bills every month. Therefore, this problem needs to be reduced by utilizing alternative energy sources. PLTS on grid is one of the solutions to reduce dependence on electrical energy from PLN. This research was carried out using a load simulation method based on the level of solar radiation in Makassar City at an installed power of 4500 VA. By using PLTS on grid the customer has two sources of electrical energy, from solar power and PLN line. The main source of electrical energy during the day is from on grid solar power and at night is from PLN line. If the power from the on grid solar power the day is insufficient to serve the load needs, PLN will automatically responsible for the electric power of the load. The simulation results show that the use of on-grid PLTS saves PLN's electricity consumption by 34.78% to 89.53%. These results illustrate that the potential for using on grid solar panels in the city of Makassar is very large

PENYULUHAN PENGHEMATAN ENERGI LISTRIK PADA RUMAH TANGGA Simon Patabang; Jeremias M. Leda; Limbran Sampebatu; Syaban Ramadhan; Chasper Steven More
Batara Wisnu : Indonesian Journal of Community Services Vol. 3 No. 2 (2023): Batara Wisnu | Mei - Agustus 2023
Publisher : Gapenas Publisher

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53363/bw.v3i2.196

Extension activities were carried out in the Karanganyar Village area, Kec. Mamajang, Makassar. In general, partners have houses that are close to each other or attached to neighbors so that the air circulation in the house is not good and the natural lighting in the house is not optimal. To get optimal lighting during the day, you must use electric lights as a source of lighting. Then to get fresh and comfortable air, partners use air conditioners or fans. With such a situation, partners experience difficulties with the cost of electricity bills which tend to increase every month. The partner's problem is how to reduce the cost of electricity bills which tend to increase every month. To help overcome partner problems, counseling on saving electricity is carried out. The main ingredients of energy-saving counseling are introducing energy-efficient electrical devices, building awareness of the importance of saving energy, and how to calculate the cost of a monthly electricity bill in one household. Based on the results of the implementation and evaluation of energy saving counseling and the results of observations, partners have realized how important it is to save energy. The cost of electricity bills from several partners has decreased compared to the previous period. This counseling has increased partners' knowledge so that they understand more about the positive and negative impacts of regular and disciplined use of electric power in the household

PELATIHAN KONVERSI DATA MENGGUNAKAN DIGITAL TO ANALOG CONVERTER METODE TAHANAN BERBOBOT BINER DAN METODE LADDER Aries Kamolan; Limbran Sampebatu
Batara Wisnu : Indonesian Journal of Community Services Vol. 3 No. 2 (2023): Batara Wisnu | Mei - Agustus 2023
Publisher : Gapenas Publisher

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.53363/bw.v3i2.212

The digital to analog converter module uses the binary weighted resistance method and the ladder method designed by Aries Kamolan makes it easy to convert data and see the process of changing digital data to analog data. By using this module, it is hoped that people will easily learn and be interested in this field and can distinguish digital data and analog data. The youth community who are members of the Bonggakaradeng Youth Association (HPBK) which is secretariat at BTN Risky housing, Kapasa sub-district, Tamalanrea sub-district, Makassar City, were chosen to be partners in this service because there are still many communities who cannot distinguish digital data and analog data and the use of these data and how to convert digital data to analog. The solution overcomes this problem by providing counseling and training to them using digital to analog converter modules using the binary weighted resistance method and the ladder method. The goal is that partners can easily perform data conversion and see the process of converting digital data to analog and introduce electrical engineering in the community. This activity went well even though the number of participants was not too much, but it seemed enthusiastic for HPBK members to take part in this training. HPBK members also want to know the basics of electrical science and the various electrical components in the module. They also expect this kind of activity again.

Title

Found 6 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 6 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 6 Documents
Search