Garuda - Garba Rujukan Digital

ANALISIS PENILAIAN RISIKO TERHADAP BAHAYA PEKERJAAN PIGGING DENGAN METODE HAZARD AND OPERABILTY STUDY: (STUDI KASUS: BAGIAN PRODUKSI PT. PERTAMINA HULU MAHAKAM) Hardiyono Hardiyono
IDENTIFIKASI Vol 6 No 1 (2020): IDENTIFIKASI
Publisher : Program Studi D-IV K3

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36277/identifikasi.v6i1.121

Cleaning of pipelines is necessary to ensure that the pipeline remains in a condition that is suitable for use, does not contain impurities that can affect the product or affect the condition of the pipe. The research objective is to identify the K3 hazards and risk assessment of the pig acceptance process using Hazop’s techniques, as well as identify them. This study used a qualitative observational approach by assessing the 6 Node P&ID diagrams in the pigging process. Assessment using the Hazops table. The results showed that the first node of Pig Barrel 20 "MOL (HMC) identified 2 critical deviations, namely: less pressure and less flow; 5 Causes, and 5 Consequences, 2nd Node Pig Barrel 12 "MOL (Condensate) identified 2 critical deviations, namely: Less Pressure and Less Flow; 6 causes, and 5 consequences, the 3rd node of the Sump Tank (T-2080) identified 3 critical deviations, namely: High level, No pressure of the pump, and More sand; 5 Causes, 6 Consequences, 4th Node Close Drain (V-915) identified only 1 (one) critical deviation, namely: High Level; 3 Causes, 4 Consequences. The 5th node of the First Stage Separator HMC (V-860) identified 4 deviations, namely: High Level, High Pressure, Low Level, Low Pressure; 11 Causes, 15 Consequence, 6th Node First Stage Separator Condensate (D-6250) identified 5 (three) deviations, namely: High Level of Condensate, High Pressure, Low Level of condensate, Low Pressure, High Level of Water; 13 Causes, 19 Consequences. The conclusion in this study is that there are 17 deviations in the pigging work process and there are 5 hazards with low risk, 12 hazards with moderate risk, 4 hazards with high risk.

ANALISIS RISIKO PADA INCINERATOR PENGOLAHAN LIMBAH MEDIS PT. PENGELOLA LIMBAH KUTAI KARTANEGARA,SAMBOJA – KALIMANTAN TIMUR Hardiyono Hardiyono; Syamsul Arifin; Andri Indra Kelana
IDENTIFIKASI Vol 7 No 2 (2021): IDENTIFIKASI
Publisher : Program Studi D-IV K3

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36277/identifikasi.v7i1.144

Risk assessment was carried out at the medical waste combustion process facility using Incinerator. The method used in this research is HAZOP. This research is descriptive qualitative or observation research. The results of this study provide an overview of the risk level of the process at the Incinerator facility, where the highest risk level is in the process of Rotary Kiln Chamber 1, Chamber 2, Heat Exchanger, Water scrubber, Cyclone, Induce draft Fan, Sampling Point, and Exhaust stack. The level of risk is derived from probability and severity. In addition, recommendations are produced as materials for companies to make design improvements so that identified risks can be minimized. Keywords : Incinerator, HAZOP, Risk

EFEKTIVITAS PENGELOLAAN LIMBAH PADAT MEDIS INFEKSIUS DI RUMAH SAKIT XYZ KOTA BALIKPAPAN Iin Pratama Sari; Hardiyono Hardiyono; Rati Cahyu Kurniawati
IDENTIFIKASI Vol 7 No 1 (2021): IDENTIFIKASI
Publisher : Program Studi D-IV K3

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36277/identifikasi.v7i1.147

Hospital XYZ of Balikpapan City, built-in 1949 by an oil company from the Netherlands established over a land area of 35,577.28 m₂. XYZ Hospital has 19 outpatient rooms, 17 inpatient rooms (150 beds), and several other facilities. This research used descriptive qualitative research with the number of respondents 5 people, the consideration used to determine the sample in this research is cleaning service officer (separation, packing, and transportation of infectious waste), medical waste burner (storage and burning of infectious solid waste) and head of HSE XYZ Hospital Balikpapan, this is done because the three parts are very closely related to infectious solid waste in the hospital. The results of field, observations showed a positive response to researchers in conducting field observations relating to the effectiveness of handling infectious solid waste in hospital XYZ. Based on research in the hospital there are conditions of waste management (segregation, packaging, storage, and standard of TPS building) 89% according to the rules and 11% are not in accordance with the rules, because there is an accumulation of B3 waste in TPS waste infectious waste, and for research hospital incinerator condition XYZ there are 80% suitable conditions and 20% unsuitable conditions, ie were not reaching the temperature at the maximum condition that is 1000 ° C which combustion only at condition 300 - 400 ° C which causes the condition of infectious waste not to ashes. Keywords: Infection, Solid Waste, Waste Management

FAKTOR YANG MEMPENGARUHI KEPATUHAN PENGGUNAAN ALAT PELINDUNG DIRI PADA PT BUKAKA TEKNIK UTAMA BALIKPAPAN Hardiyono Hardiyono; Lina Yuliana; Arief Subaktiar
IDENTIFIKASI Vol 7 No 1 (2021): IDENTIFIKASI
Publisher : Program Studi D-IV K3

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36277/identifikasi.v7i1.166

This study aims to determine the effect of any influences that affect worker compliance with the use of personal protective equipment on fabricated workers at PT . Unlock the Main Techniques of Balikpapan. The sampling technique was carried out by total sampling which then selected 35 workers from the established criteria as samples. The results of the study using multiple regression showed that knowledge of workers, comfort of PPE and supervision of workers had a positive influence on the use of personal protective equipment. Worker knowledge has a significant positive effect on the use of PPE with t count > t table, namely 4.579> 2.039 or sig.t value (0.124) < = 0.5 . Meanwhile, the availability and comfort of workers were also found to have a positive effect on profitability with t count < t table, namely 1.197 < 2.039 or sig.t (0.03) < = 0.5. Likewise, the worker supervision factor also has a positive effect on profitability with t count < t table that is 3.903> 2.039 or sig.t value (0.066) < = 0.5

IMPLEMENTASI KESELAMATAN KERJA PADA PEMBUATAN AREA DRILLING RIG DENGAN PENDEKATAN TASK RISK ASSESMENT (STUDI KASUS PADA XYZ INDONESIA DI KALIMANTAN TIMUR) Komeyni Rusba; Hardiyono Hardiyono; James Evert AL; Impol Siboro; Patunru Pongky; Indrawan Tobarasi
Jurnal Public Policy Vol 5, No 2 (2019): Mei-Oktober
Publisher : Universitas Teuku Umar

Implementation of work safety in making an area of things that need to be observed the process from upstream to downstream, because occupational safety lives or is on every task of the work that has been arranged in such a way by the company and is divided completely in each section/division as the function of management in work management . This study discusses the implementation of work safety in the drilling rig area at XYZ Indonesia with the task risk assessment approach in East Kalimantan. The purpose of this study is to describe the achievements of the implementation of work safety in the construction of the drilling rig area in XYZ Indonesia with the task risk assessment approach. From the results of the study, the implementation of work safety in the construction of the drilling rig area in XYZ Indonesia with the task risk assessment approach is to carry out controls that have been regulated based on the procedures and technical guidelines for occupational safety and health of XYZ Indonesia on the work of making drilling locations for 43 activities to reduce risk in each activity.

ANALISIS KESESUAIAN SARANA PENYELAMATAN DIRI PADA PT PERUSAHAAN LISTRIK NEGARA DI BALIKPAPAN Impol Siboro; Noeryanto Noeryanto; Hardiyono Hardiyono; Olga Regina Yeusy
IDENTIFIKASI Vol 8 No 1 (2022): IDENTIFIKASI
Publisher : Program Studi D-IV K3

Show Abstract | Download Original | Original Source | Check in Google Scholar

Rescue facilities are facilities used by residents and firefighters in an effort to save human lives and property in the event of a fire in a building and the environment. Based on the Regulation of the Minister of Public Works No. 26 of 2008 concerning Technical Requirements for Fire Protection Systems in Buildings and the Environment, self-rescue facilities consist of means of escape, emergency stairs, emergency lighting, evacuation route signs and temporary gathering places. In this case, PT Perusahaan Listrik Negara in Balikpapan, especially PT PLN (Persero) UP3 Balikpapan, has a multi-storey building consisting of 3 floors and there are several sources of danger such as the number of flammable materials in the room such as office furniture, office stationery, electronic equipment. and also flammable archival documents. The purpose of this study was to determine the suitability of the means of escape at the PT Perusahaan Listrik Negara building in Balikpapan. This study uses a descriptive method with a qualitative approach, to determine the suitability of the means of escape at the PT PLN (Persero) UP3 Balikpapan building, namely making descriptive by conducting field observations using a checklist form and conducting interviews with informants, then the results are analyzed using the percentage of conformity criteria assessment. From the results of the study, it was found that the value of the suitability of egress facilities was 100%, emergency stairs 75%, emergency lighting 83%, evacuation route signs 86%, temporary gathering places 60% with an average value of the suitability of self-rescue facilities in the PT PLN (Persero) UP3 building. Balikpapan is 80.8% with good category.

IDENTIFIKASI BAHAYA DAN RISIKO PADA AKTIVITAS PENGUPASAN PERMUKAAN TANAH DAN PENGANGKUTAN TOP SOIL DAN OVERBURDEN DI PT ALAM JAYA PRATAMA KUTAI KARTANEGARA Hardiyono Hardiyono; Patunru Pongky; Komeyni Rusba; Impol Siboro; Adrian Pranajaya
Jurnal Ilmiah Hospitality Vol 11 No 2: Desember 2022 (in Press)
Publisher : Sekolah Tinggi Pariwisata Mataram

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.47492/jih.v11i2.2289

Occupational Health and Safety (OHS) is in the interest of workers, employers and governments around the world. Coal mining is a long-term activity, involving high technology and capital intensive. Identification of occupational hazards and risks is an early stage that must be considered by the company. The purpose of this study is to identify hazards and risks as well as carry out risk assessment and risk control in stripping activities and transportation of top soil and overburden (OB) at PT. Alam Jaya Pratama Kutai Kartanegara. Data collection and regarding hazard identification and risk assessment are analyzed with IBPR then evaluated and determined for risk control efforts so that they can work safely. This research is a qualitative research, namely descriptive research. In the study there were 7 sources. The final result of the identification of hazards and risks are 27 identified hazard activities, and for the percentage before additional controls are carried out. Stripping activity and transportation of top soil, high 23%, medium 23% and low 54%. And the activity of stripping the soil surface and transporting overburden, high 21%, medium 21% and low 58%. After additional control was carried out, the percentage of risk experienced a good change with percentages, high 0%, medium 0% and low 100% in stripping activities and transporting top soil and overburden (OB). It is known that risk assessment and control are included in the effective category.

ANALISIS KESELAMATAN KIMIA DALAM PENGGUNAAN BOILER CHEMICAL WATER TREATMENT DI PT. FEEDBACK INFRA BALIKPAPAN Komeyni Rusba; Patunru Pongky; Impol Siboro; Hardiyono Hardiyono; Noeryanto Noeryanto; Muhammad Ramdan; Muhammad Rezaldy; Daniel Wolo
OPTIKA: Jurnal Pendidikan Fisika Vol. 6 No. 2 (2022): OPTIKA: Jurnal Pendidikan Fisika
Publisher : Program Studi Pendidikan Fisika, Fakultas Keguruan dan Ilmu Pendidikan, Universitas Flores

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.37478/optika.v6i2.2180

Keselamatan kimia adalah sebuah upaya dalam menciptakan kondisi aman dari pada bahaya dan resiko bahan kimia berbahaya keselamatan ini meliputi pengunaan bahan kimia sifat bahan kimia dan penyimpanan bahan kimia untuk tujuan mengetahui bahaya fisik kesehatan maupun lingkungan sehingga dapat mengambil perlindungan dan pencegahan dari bahaya kimia dengan menerapkan pengendalian administrasi, dan pengunaan alat pelindung diri. PT. Feedback Infra Balikpapan yang berada di kota balikpapan provinsi kalimantan timur adalah perusahaan yang bergerak di bidang kontraktor jasa industri pembangkit listrik tenaga uap (PLTU). PT. Feedback Infra Balikpapan mengoperasikan unit pengelolahan air boiler tempat dimana bahan kimia amonia (NH3) diimplementasikan dan disimpan. Pada area implementasi amonia (NH3) ada pada laboratorium uji dan doshing injeksi kimia lalu untuk penyimpanan amonia (NH3) ada pada gudang penyimpanan kimia. Pada penelitian ini peneliti membahas mengenai implementasi dan penyimpanan bahan kimia amonia (NH3) di pengelolahan air boiler PT. Feedback Infra Balikpapan. Penelitian ini menggunakan metode penelitian kualitatif dimana peneliti menggunakan lembar checklist mengenai kesesuaian implementasi dan penyimpanan bahan kimia amonia (NH3) dan pedoman wawancara untuk melakukan wawancara terhadap informan yang bertannggung jawab mengenai implementasi dan penyimpanan bahan kimia amonia (NH3). Dari hasil penelitian ditemukan bahwa kesesuaian untuk implementasi bahan kimia amonia (NH3) di laboratorium uji 50%, kesesuaian untuk penyimpanan bahan kimia amonia (NH3) di gudang penyimpanan kimia 66% kesesuaian untuk implementasi bahan kimia amonia (NH3) di doshing injeksi kimia 66% dengan total kesesuaian implementasi dan penyimpanan bahan kimia amonia (NH3) di pengelolahan air boiler PT. Feedback Infra sebesar 66% dengan kategori “cukup’.

IDENTIFIKASI BAHAYA DAN PENILAIAN RISIKO PEKERJAAN PENGIKATAN MOORING LINE PADA GALANGAN KAPAL PT. ASIA ADHITAMA SHIPYARD SOMBER BALIKPAPAN Hardiyono Hardiyono; Erwin Ananta; Weril Sukanto
IDENTIFIKASI Vol 8 No 2 (2022): IDENTIFIKASI
Publisher : Program Studi D-IV K3

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.36277/identifikasi.v8i2.243

Mooring adalah suatu sistem untuk mengikatkan kapal pada terminal darat, dermaga, kapal, buoy mooring, hingga merapat dengan menggunakan beberapa tali kepil Kapal didesain dengan kemampuan olah gerak yang baik. Penelitian ini bertujuan untuk melakukan identifikasi risiko serta penilaian risiko dari pekerjaan pengikatan mooring line. Peneliti menggunakan Risk Matriks dan tabel HIRARC sebagai alat identifikasi dan penilaian risiko. PT. Asia Adhitama Shipyard merupakan perusahaan galangan kapal yang dalam operasi pekerjaannya sangat erat hubungannya dengan risiko-risiko pekerjaan yang bersifat fisik, seperti pekerjaan pengikatan mooring line pada kapal. Penelitian ini adalah penelitian kualitatif, yakni penelitian yang bersifat deskriptif dan cenderung menggunakan analisis. Dalam penelitian ini terdapat 12 narasumber yang terdiri dari 3 pekerja galangan, 3 helper umum, 4 awak kapal dan 2 mualim kapal. Hasil akhir dari penilain risiko ini berupa, teridentifikasi dengan nilai low sebanyak 1. Untuk risiko dengan nilai medium sebanyak 11 bahaya. Tingkat risiko dengan nilai high seb anyak 2 bahaya yakni teganggan tali yang mengencang secara tiba-tiba, dan untuk presentase sebelum dilakukan pengendalian tambahan. High 18%, medium 73% dan low 9%. Setelah dilakukan pengendalian tambahan presentase risiko yang ada mengalami perubahan yang baik yakni dengan presentase medium 9%, low 82% dan very low 9%. Maka diketahui bahwa penilaian serta pengendalian risiko termasuk dalam kategori efectif.

INSPEKSI STORAGE TANK DI PT. ABC PADA PROYEK PT. XYZ MENGGUNAKAN METODE RISK BASED INSPECTION Hardiyono Hardiyono; Patunru Pongky; Sri Purwanti; Komeyni Rusba; Impol Siboro; Hana Eka Putri
Media Bina Ilmiah Vol. 17 No. 9: April 2023
Publisher : LPSDI Bina Patria

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33578/mbi.v17i9.376

Storage tank (tangki timbun) merupakan salah satu objek yang dianggap penting dalam industri perminyakan dan gas bumi karena menyimpan produk utama dalam jumlah yang banyak dan berdampak besar. Tangki timbun yang digunakan tanpa henti setiap harinya dapat mengakibatkan rentan akan terjadinya kerusakan yang dapat menimbulkan gangguan pada proses kerja. Untuk itu penting dilakukan inspeksi berkala sebagai preventif dalam mencegah kerugian besar bagi perusahaan. Penelitian ini difokuskan untuk mengetahui tingkat risiko pada aspek desain tangki penimbum nomor 610-TK-101 yang berisikan bahan bakar minyak berbahaya dengan produk crude oil dan jadwal inspeksi secara interval di PT. XYZ. Penelitian ini menggunakan metode Risk based Inspection (RBI). Data penelitian yang digunakan terdiri dari 2 (dua) jenis data, yaitu data primer dan data sekunder. Metode pengumpulan data primer yaitu dengan cara wawancara dan dokumentasi. Sementara data sekunder dilakukan dengan cara kajian literatur. Pengelohan dan analisis data terdiri atas pemeringkatan risiko kemungkinan dan konsekuensi kegagalan, mengukur dan menghitung ketebalan minimum tangki dan corrosion rate tangki dan menentukan risk matrix Risk Based Inspection dan sisa umur tangki. Hasil penelitian menunjukan tingkat risiko pada tangki nomor 610-TK-101 adalah medium risk atau risiko sedang. Laju korosi paling tinggi pada course 4 dengan hasil perhitungan 0,690 mm/tahun dengan nilai minimum ketebalan tangki 6,15 mm. Hal ini menunjukan dalam waktu 2 tahun kedepan tangki 610-TK-101 harus dilakukan inspeksi oleh pihak yang berwenang untuk mencegah terjadinya kerusakan.

Title

Found 10 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 10 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 10 Documents
Search