Jurnal Engine: Energi, Manufaktur, dan Material
Vol 7, No 2 (2023)

Analisis Kecepatan Putar Silinder Perontok Terhadap Kinerja Mini Power Thresher Hasil Rekayasa UPJA Desa Sungai Kelambu

Suhendra Suhendra (Politeknik Negeri Sambas)
Deliana Pridaningsih (Badan Perencanaan Pembangunan Daerah Kabupaten Sambas)
Lang Jagat (Politeknik Negeri Sambas)
Feby Nopriandy (Politeknik Negeri Sambas)



Article Info

Publish Date
24 Oct 2023

Abstract

Various types of power threshers have been developed to suit conditions in the field. The development of the power thresher was also carried out by UPJA Sungai Kelambu Village, Sambas Regency by making a mini power thresher that was designed to suit the conditions of the land and the needs of local farmers. The purpose of this research was to obtain a relationship between threshing rotational speed and performance on the mini power thresher. The threshing cylinder rotational speed was varied at 669 and 778 rpm. The measured performance of the mini power thresher was feeding capacity, threshing capacity, cleanliness, percentage of grain not threshed, percentage of scattered grain, threshing efficiency, percentage of yield loss, fuel consumption, and increase in cracked grain. The test sample used was IR 64 rice. Based on the test results, the rotational speed of the thresher cylinder has a very significant effect on the threshing performance of the mini power thresher. Changes in threshing cylinder rotational speed from 669 rpm to 778 rpm can improve the performance of the mini-power thresher in terms of feed capacity, threshing capacity, threshing cleanliness, percentage of grain scattered, and percentage of yield loss. The decrease in performance is found in fuel consumption and the percentage of cracked grain. The variables that relatively unchanged were the percentage of grain not threshed and threshing efficiency. The operation of this mini power thresher is recommended at a thresher cylinder rotational speed of 778 rpm.

Copyrights © 2023






Journal Info

Abbrev

Jurnal_ENGINE

Publisher

Subject

Control & Systems Engineering Energy Industrial & Manufacturing Engineering Materials Science & Nanotechnology Mechanical Engineering

Description

Jurnal Engine: Energi, Manufaktur, dan Material is registered with ISSN 2579-7433 (online) on The Indonesian Institute of Sciences (LIPI). This journal is under publishment of the Mechanical Engineering Department, Universitas Proklamasi 45 Yogyakarta. It is a scientific journal focusing on Energy, ...