Garuda - Garba Rujukan Digital

Article Per Year (5 Year)

All

Journal Of Vocational Health Studies

JVHS
Website

Published by Universitas Airlangga

ISSN : 25807161 EISSN : 2580717X DOI : -

Core Subject : Health,

Health Professions

Journal Of Vocational Health Studies (J.Voc.HS), with registered number ISSN 2580-7161 (Print) and ISSN 2580-717X (Online), is a scientific journal published by Department Of Health, Faculty of Vocational Education, Universitas Airlangga. Journal of Vocational Health Studies publishes scientific articles such as, Case Studies, Literature Studies, and Research Reports related to various aspects of science in the field of Vocational Health.

Arjuna Subject : -

Articles 10 Documents

Search results for , issue "Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES" : 10 Documents clear

OBTURATOR FABRICATION WITH MAGNET ATTACHMENT Mia Laksmi Lita Rosa
Journal of Vocational Health Studies Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Background: Development of science and technology led to people having birth defects (congenital), trauma or because of there sected tumor can be made of a prosthesis. Purpose: To learn the technique of making obturator with magnet attachment. Review: Assembly of magnet in obturator can improve the stability and retention of the prosthesis. Conclusion: The techniques of making obturator with magnetic attachment begins with making the double impression. The part defect is waxed on a master cast, and the contoured wax lid was fabricated on the master cast to close the hollow obturator. The lid along with the magnetic assembly was attached to the obturator with auto polymerizing resin. Obturator is inserted in the patient and created a master cast for the fabrication of denture. Wax of master cast of denture is assembled magnet for attachment to the obturator, then flasking, wax boil-out of master cast, acrylic processing, deflasking, finishing, and polishing.

VARIOUS LABIAL BOW MODIFICATION IN REMOVABLE ORTHODONTIC APPLIANCE Ajeng Firliana Dewi; Elly Rusdiana; Sianiwati Goenharto
Journal of Vocational Health Studies Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Background: In several dental malposition cases, removable orthodontic component modifications are needed in order to obtain maximum end result, and comfortable to use. One of the active components which can be modified is the labial arch. Objective: To identify various labial bow modifications in the removable orthodontic appliance. Review: Labial bow can be modified according to patient need. The modification can be used to correct dental arches, canine retraction, and correcting teeth extrusion. The variations include labial arch with M-loop, labial arch with canine retraction loop, labial arch with loop on canine, and labial arch with Andresen loop. Another modification is a labial bow with the addition of soldered hook and coil to put an elastic. Conclusion: Labial bow has various modifications in a removable orthodontic appliance according to the function required.

PATTERN OF DEMAND FOR MAKING DENTURES AT DENTAL LABORATORY IN SURABAYA CITY, INDONESIA Okti Setyowati; Sujati Sujati; Sri Wahjuni
Journal of Vocational Health Studies Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Background: Dental laboratory in Surabaya frequently make various kinds of the denture. But surely there is a case that was the most commonly accepted, to adjust to the needs of dental laboratories on the priorities of the work was done, it was necessary to give attention to the case that many common and must be taught to students Dental Technology. Purpose: To find an overview of the number the dentures received by the dental laboratory in Surabaya from 2013 until 2017. Methods: The data used is secondary data from a dental laboratory in Surabaya from 2013 to 2017. Result: A request for flexible and RPDs porcelain, acrylic resin and metal in 5 years obtained tend to be stable in high demand, even ina given year a sharp increase in RPDs flexible and drastic decline on fixed porcelain denture. Instead of facing acrylics, fixed denture tends to stabilize at its lowest during the period. While the acrylic RPDs has increased significantly in the last two years, in contrast to metal frame dentures, which decreased at two years latest. Conclusion: Flexible denture significantly better than with acrylic resin conventional denture on parameters taken in this research. Fixed porcelain denture are mostly made by a dental laboratory when compared with a removable partial denture acrylic resin.

MAKING SINGLE COMPLETE DENTURES FOR THE MATERIAL WITH TUBER MAXILLA CASE LARGE Endang Kusdarjanti; Okti Setyowati; Febriana Zseni
Journal of Vocational Health Studies Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Background: single complete denture is complete denture where its antagonist there tooth original good in part or else entirely. Besides that on case this there bulge tuber maxilla more big of the normal size of course only will complicate at the stage of preparation of teeth and also take effect on retention, stability, and comfort. Objective: to discuss about technique manufacture single complete denture with a large tuber maxilla. Review of literature: Single complete denture is a complete denture in which the antagonistic teeth can be either partial or whole natural teeth. Whereas complete denture is a complete maxillary and mandibular denture that is used if both jaws do not have natural teeth. To get good inclination and occlusal surface can do with Swenson technique and Yurkstas technique which is use a compensating curve template to determine the occlusal views of Wilson’s curve and spee curve. Conclusion: in the making single complete denture, moment preparation tooth there difficulty because have a big maxilla and need a lot of grinding on dental elements and additions anasir second premolar teeth for get aesthetic and functional is good, too take effect to retention and stability.

THE IMMERSION OF ACRYLIC RESIN WITH INJECTION MOULDING TECHNIQUE ON LOOSE DENTURES DIMENSIONAL CHANGE Endang Kusdarjanti; Mia Laksmi L.; Okti Setyowati
Journal of Vocational Health Studies Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Background: Acrylic resin is the most commonly used denture base material. One disadvantage is that it can absorb water that can cause changes in dimensions. Changes in the dimensions of acrylic resin are influenced by processing acrylic resin. At present injection molding techniques are known to be better than compression molding. Dimension changes due to water absorption occur in the first 7 days and interval intervals of up to 12 days. Purpose: this study was to determine whether immersion of acrylic resin with Injection molding techniques had an effect on changes in dimensions. Method: The study was conducted on acrylic resin test rods with a size of 25 mm x 25 mm x 5 mm. by using injection molding techniques. Acrylic resins are immersed in water for 24 hours, 48 hours and 12 days. Changes in dimensions are measured using a caliper with an accuracy of 0.01 mm. Statistical analysis was performed using the normality test, homogeneity test, and ANOVA test. Results: this study found that there was no change in dimensions of acrylic resin with water-immersed injection molding techniques 24 hours, 48 hours and 12 days. Conclusion: That immersion of acrylic resin in water at 24 hours, 48 hours, and 12 days with injection molding techniques did not affect changes in dimensions.

MANUFACTURING TECHNIQUE OF METAL CERAMIC RESTORATION WITH IMPLANT-ABUTMENT AT GINGIVAL RESORPTION CASE Galih Paramarta; Eny Inayati
Journal of Vocational Health Studies Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Background: The low levels of patient satisfaction and confidence in the restoration of the gingival resorption results in impaired quality of life in both functional and psychosocial aspects. It is necessary to manufacture a dental restoration to restore the mastication, phonetic, and aesthetic functions associated with soft tissue repair. Manufacture of gingiva ceramic restorations which are believed to be an alternative to restore the aesthetic function and harmonization of the patient’s teeth. In terms of manufacturing techniques, this restoration has a level of difficulty in achieving a balance between “White aesthetic” and “aesthetic pink”. Objective: This study aims to provide knowledge to the reader of Manufacturing Technique of Metal Ceramic Restoration with Implant-Abutment at Gingival Resorption Case. Reviews: Gingiva ceramic restorations can be used to create esthetic implant-supported restorations when bone and gingival tissues are deficient and surgical replacement of such tissues is not possible. Dental technicians should be able to analyze the three-dimensional shapes of gingival anatomy, color, texture, smile components, the balance of the “pink aesthetic” and “white aesthetic”. Conclusion: Manufacturing Technique of Metal Ceramic Restoration with Implant-Abutment at Gingival Resorption Case including the manufacture of metal coping, oxidation, application of opaque coating, application of the first “white aesthetic” ceramics (Opaque Dentine, Dentine, Enamel and transpa on crown coping restorations), Application of opaque gingiva layer, gingival ceramics build-up "pink aesthetics”, first firing, followed by correction build-up, and second firing, and ends with the glazing process.

FABRICATION OF UNILATERAL OVER DENTURE WITH COMBINATION HORIZONTAL RETENTION AND VERTICAL ATTACHMENT (LABORATORY PROCEDURES) Sri Wahjuni; Sri Redjeki; Azmi Sabilakisbatul Wafi
Journal of Vocational Health Studies Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Background: Currently, there is a lot of design attachment, and every design has a different laboratory procedure. One of them is retention combination horizontal and vertical synchronization. Purpose: to know the process of making a unilateral overdenture with combination horizontal and vertical attachment (laboratory procedure). Reviews: Overdenture is artificial tooth receives support and the retention of one or more teeth an abutment or receives the support of an implant. Attachment is a connector owned two or more parts. One part connected with a root, teeth, or implant while the other part connected to protesa. Unilateral over denture is artificial tooth some off who just made was on the side of the jaw just. Conclusion: The manufacture of unilateral overdenture retention combination with horizontal and vertical synchronization attachment in the laboratory has many steps.

COPING MANUFACTURED TECHNIQUE OF SPINELL SLIP CAST ALL CERAMIC BY CONVENTIONAL METHODS AND CAD/CAM Insani Hidayatin; Sri Redjeki Indiani; Rr. Dwiyanti Feriana Ratwita
Journal of Vocational Health Studies Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Background: Ceramic restorations is divided into two kindsnamelyPorcelain Fused to Metal (PFM) and all-ceramic restorations. In ceram spinell is one of the materials needed for manufacturing anterior coping of all ceramic which has better aesthetic than in other in ceram. Methods which have been done are Conventional Slip Cast by application of spinell paste on refractory die manually and CAD/CAM computer-based technique. The difference of mentioned previously methods is few step-in slips cast methods can be performed only by one step CAD/CAM methods. Objective: To discover the differences between Conventional Slip Cast methods and CAD/ CAM methods. Review: Application of CAD/CAM methods has few advantages compared to conventional methods. Since few step-in conventional methods can be performed only one step in CAD/CAM methods. Conclusion: In order to shorten the time in manufacturing spinell all-ceramic, the dental technician may use CAD/CAM methods. Few advantages of CAD/CAM methods compare to slip cast methods are not necessary to do die to block out, die duplication, wetting agent spraying, vitasonic and ultrasonic usage, giving border by ink pen for determining application border, preparing spinell paste for coping application. Those steps all can be performed only by scanning, design, and milling by CAD/CAM methods. Besides that, coping result produced by CAD/ CAM methods has good accuracy due to spinell block utilization which has better homogenous composition.

Front Matter Vol.3 No.1 2019 Front Matter
Journal of Vocational Health Studies Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (369.61 KB)

Front Matter Vol.3 No.1 2019

Back Matter Vol.3 No.1 2019 Back Matter
Journal of Vocational Health Studies Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES
Publisher : Faculty of Vocational Studies, Universitas Airlangga

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (73.559 KB)

Back Matter Vol.3 No.1 2019

Page 1 of 1 | Total Record : 10

Filter by Year

2019 2019

Filter By Issues

All Issue Vol. 7 No. 1 (2023): July 2023 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 6 No. 3 (2023): March 2023 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 6 No. 2 (2022): November 2022 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 6 No. 1 (2022): July 2022 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 5 No. 3 (2022): March 2022 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 5 No. 2 (2021): November 2021 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 5 No. 1 (2021): July 2021 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 4 No. 3 (2021): March 2021 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 4 No. 2 (2020): November 2020 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 4 No. 1 (2020): July 2020 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 3 No. 3 (2020): March 2020 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 3 No. 2 (2019): November 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 3 No. 1 (2019): July 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 2 No. 3 (2019): March 2019 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 2 No. 2 (2018): November 2018 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 2 No. 1 (2018): July 2018 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 1 No. 3 (2018): March 2018 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 1 No. 2 (2017): November 2017 | JOURNAL OF VOCATIONAL HEALTH STUDIES Vol. 1 No. 1 (2017): July 2017 | JOURNAL OF VOCATIONAL HEALTH STUDIES More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota surabaya,

Jawa timur

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email -

Phone -

Journal Mail Official -

Editorial Address -

Location Kota surabaya, Jawa timur INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
-

Phone
-

Journal Mail Official
-

Editorial Address
-

Location
Kota surabaya,

Jawa timur

INDONESIA