Garuda - Garba Rujukan Digital

All

Journal of Applied Geology

jag
Website

Published by Universitas Gadjah Mada

ISSN : 25022822 EISSN : 25022822 DOI : https://doi.org/10.22146

Core Subject : Science, Social, Engineering,

Civil Engineering, Building, Construction & Architecture Earth & Planetary Sciences Energy Engineering Environmental Science

Journal of Applied Geology – JAG focuses on the applied geology and geosciences with its key objective particularly emphasis on application of basic geological knowledge for addressing environmental, engineering, and geo-hazards problems. The subject covers variety of topics including geodynamics, sedimentology and stratigraphy, volcanology, engineering geology, environmental geology, hydrogeology, geo-hazard and mitigation, mineral resources, energy resources, medical geology, geo-archaeology, as well as applied geophysics and geodesy.

Arjuna Subject : Ilmu Bumi dan Planet (semua kategori) - Geologi

Articles 6 Documents

Search results for , issue "Vol 6, No 1 (2021)" : 6 Documents clear

Stratigraphy of Kendeng Zone in Miyono Village and Surrounding, Sekar District, Bojonegoro Regency, East Java, Indonesia Mutawif Ilmi Muwaffiqih; Wahyu Ardiansyah Nugraha; Irvan Fatarwin Lubis; Mochammad Indra Novian
Journal of Applied Geology Vol 6, No 1 (2021)
Publisher : Geological Engineering Department Universitas Gadjah Mada

This paper will comprehensively discuss the stratigraphy of the Kendeng Zone by using geological field mapping and laboratory analysis. The research area located in the Miyono Village and surrounding areas, Sekar District, Bojonegoro Regency, East Java with an area of 4x5 km2. Based on the geological mapping results obtained 160 points station with a variety of results in the form of tracking map of the research area. Laboratory analysis uses Embry and Klovan classification (1971), Pettijohn et al. (1987), and Mount (1985) for petrographic analysis, while paleontological analysis using Manual of Planktonic Foraminifera (Postuma, 1971) and Atlas of Benthic Foraminifera (Holbourn et al., 2013). This paper will show the differences between regional stratigraphy and the result, depositional environment, and its mechanism. Lithology units found grouping into nine units. The research area epoch ranged between N18-N23 (early Pliocene - Holocene) and the depositional environment from the lower bathyal to the terrestrial. The geological structures of the research area must be considered in the stratigraphic arrangement determination. Based on the analysis, the Kendeng Zone stratigraphic column was obtained and expected to provide accurate data of Kendeng Zone specifically around Miyono area.

Engineering Site Investigation for Foundation Design and Construction in Shale and Sandstone Derived Soils of Okitipupa Area, Southwestern Nigeria Falowo Olusola Olumuyiwa
Journal of Applied Geology Vol 6, No 1 (2021)
Publisher : Geological Engineering Department Universitas Gadjah Mada

Geotechnical and geo-electrical investigations of Okitipupa has been carried out with the major objectives of establishing the subsoil/geology, evaluate the geotechnical properties and recommend appropriate foundation alternatives for building foundation construction. Seven borings were carried out with hand auger at two cone penetration test locations, and representative samples were collected and analyzed in the laboratory in accordance with relevant geotechnical engineering standards. In addition, six vertical electrical soundings (VES) were also conducted using Schlumberger configuration. The result of VES delineates three major geologic sequence comprising the topsoil/caprock, sand surficial aquifer, and sand intermediate aquifer. The topsoil has resistivity range of 242 – 1503 ohm-m and thickness of 3.4 - 20.9 m composed of clay sand and sand. This layer is capable of supporting shallow foundation such as simple spread, raft of reinforced concrete, with recommended allowable bearing pressure of 100 KN/m2 at depths of 1.0 m and 3.2 m in the northern and southern part of the study area respectively. The estimated settlement are less than 50 mm using foundation width of 0.6 m, but could be reduced by almost 50% if the width is greater than or equal to 2 m. The groundwater level is very deep (>10 m) and may not likely threatens the integrity of the foundation structures. The estimated allowable bearing capacity for strip footing (203 – 980 KN/m2), square footing (608 – 2940 KN/m2) within 1.4 m depth is appropriate. The capacity of driven (deep foundation) circular piles of diameters 400mm, 500mm, and 600mm, the recommended pile capacity varies at depth of 5 m (69 – 124 KN), 10 m (225 – 378 KN), and 15 m (470 – 766 KN), while that of bored circular pile ranges from (36 – 75 KN), 10 m (93 – 180 KN), and 15 m (170 – 317 KN).

Dominant Weathering Profile Assessment of Kebo-Butak Volcanic Rocks in Gedangsari and Ngawen area, Yogyakarta, Indonesia Fathan Hanifi Mada Mahendra; I Gde Budi Indrawan; sugeng sapto surjono
Journal of Applied Geology Vol 6, No 1 (2021)
Publisher : Geological Engineering Department Universitas Gadjah Mada

The Gedangsari and Ngawen area is predominantly composed of volcanic and volcaniclastic sequencesdistributed east – west direction of the northern parts of Southern Mountain. The massive tectonism as well as tropical climatein this region have been producing weathering profiles in varying thickness which inevitably affects thegeotechnical properties. This study aims to assess the dominant weathering profileof the lower part of Kebo-Butak Formation as well as evaluating the distribution of the discontinuity. In order to know the dominant weathering profile and discontinuity evaluation, this study utilizes a total of 26 panels from five stations investigated through a geotechnical data acquisition including the geological condition, weathering zones, joint distribution, and discontinuity characteristics. The result shows four types of dominant weathering profiles in lower part of Kebo-Butak Formation called as dominant weathering profile A, B, C, and D. Profile A, B, C consisted of a relatively identical weathering degree pattern of fresh, slightly, moderately, completely weathered zone with the variation of thicknesses. However, the weathering degree in profile D reached the residual soil degree controlled by more intensive joints. The fine-grained sedimentary rocks also tends to have smaller spacing, shorter persistence, and higher weathering degree of discontinuities as compared to coarse-grained sedimentary rocks.

Comparison of Coal Reserve Estimation Methods, Case Study PT. Bukit Asam Area, South Sumatra, Indonesia Taufiq Muhammad Wijayanto; Wahyu Wilopo; I Gde Budi Indrawan; Sunarko Sunarko
Journal of Applied Geology Vol 6, No 1 (2021)
Publisher : Geological Engineering Department Universitas Gadjah Mada

The calculation of coal reserves is influenced by the dimensions or size of the coal deposit. There are several types of coal reserve calculation methods, and the use of these methods is adjusted to existing geological conditions. Each method will produce a different amount of coal reserves, although the location is the same. Besides, the amount of coal mining that can be produced is primarily determined by the mine design, especially the optimal slope as a basis for mining pits in the coal extraction. This research aims to estimate coal reserves based on existing pit designs using a variety of methods. Data on coal thickness and topography are used as the basis for reserves estimation. Coal reserve estimation is conducted in several methods: nearest neighbor point (NNP), inverse distance weighted (IDW), and kriging using Surfer 13 software. The results of the reserves estimation indicate that kriging is the best method by providing the smallest error value with an RMSE value of 0.67 and coal reserves of 27,801,543 tons.

Fluid Inclusion Study of Epithermal Gold-Base Metal Mineralization System in the Shwebontha Prospect, Monywa Mining District, Central Myanmar Monywa Toe Naing Oo; Agung Harijoko; Lucas Donny Setijadji
Journal of Applied Geology Vol 6, No 1 (2021)
Publisher : Geological Engineering Department Universitas Gadjah Mada

The Shwebontha Prospect area is one of prominent epithermal Au-Ag prospects in Monywa mining district, central Myanmar, characterized by the appearance of gold-bearing and base metal quartz veins with gold grade is around 3g/t -10.4g/t. The geology of the area consists of the volcanic and volcaniclastic rocks of Upper Oligocene-Middle Miocene Magyigon Formation that served as the host rock of the ore mineralization. This research focused on fluid inclusion study is aimed to know the characteristics of hydrothermal fluids during ore mineralization as well as the possible paleo- depth and temperature of formation of gold-bearing and base metal quartz veins. The mineralization styles are gold-bearing brecciated quartz veins and chalcedonic quartz veins where sulfides are clustered as well as disseminated both in quartz gangue and volcanic host rocks. Those quartz veins include pyrite, sphalerite, galena, chalcopyrite and gold (electrum). Fluid inclusion microthermometry indicates that the ore mineralization is characterized by the values of homogenization temperature range from 158°C to 310°C and salinities range from 0.35 to 2.41wt.% NaCl equiv. This temperature is consistent with the formation temperature of 250°C to 270 °C and also their estimate paleo-depth of formation is between 440m and 640m respectively. Microthermometric data indicates that fluid mixing and dilution were significant processes during ore mineralization and evolution of hydrothermal fluids. Based on the petrography of fluid inclusion, microthermometric measurements and ore minerals assemblage as well as estimation of paleo-depth from the Shwebontha Prospect imply that forming in under shallow level epithermal environment

Subsurface Geology and Hydrothermal Alteration of The “X” Geothermal Field, West Java: A Progress Report Peter Pratistha Utama; Pri Utami; Gayatri Indah Marliyani; Randy Wijaya Atmaja
Journal of Applied Geology Vol 6, No 1 (2021)
Publisher : Geological Engineering Department Universitas Gadjah Mada

“X” geothermal field is one of the geothermal fields in West Java. PT. Y (Persero) developed it since 2014. The geothermal field has produced electricity, with installed capacity amounted to 55 MWe. The “X” geothermal system is vapor-dominated. The geothermal manifestations are located at approximately 2,100 m asl. The “X” field consists of three main upflow zones: Kawah Putih, Kawah Ciwidey, and Kawah Cibuni. This study analyzed the drill cuttings from 3 wells as the primary data with total depths ranging from 1,581 to 2,166 m with the well’s highest stable temperatures measured of ±230°C. The three wells selected for this research—Well A, Well B, and Well C—were analyzed to describe the rock properties and estimate the prospect areas of present-day geothermal exploration in the “X” geothermal field.The paper aims to understand better of the subsurface geology and its correlation to the dynamic processes (i.e., hydrothermal alteration) in the “X” geothermal field. The hydrothermal minerals are formed by near-neutral pH fluids and are characterized by quartz, calcite, clays (smectite, illite, chlorite), wairakite, epidote, and actinolite. Acidic fluids are evident by forming acidic hydrothermal mineral, e.g., anhydrite at various depths of the studied wells, particularly at Well C which is located around Sugihmukti-Urug area. Moreover, the previous studies by Reyes (1990), Layman and Soemarinda (2003), Rachmawati et al. (2016), Elfina (2017) on hydrothermal minerals, geothermal manifestation characteristics, fluid geochemistry, and conceptual model are adapted to improve the analysis and interpretation of this paper.

Page 1 of 1 | Total Record : 6

Filter by Year

2021 2021

Filter By Issues

All Issue Vol 8, No 1 (2023) Vol 7, No 2 (2022) Vol 7, No 1 (2022) Vol 6, No 2 (2021) Vol 6, No 1 (2021) Vol 5, No 2 (2020) Vol 5, No 1 (2020) Vol 4, No 2 (2019) Vol 4, No 1 (2019) Vol 3, No 2 (2018) Vol 3, No 1 (2018) Vol 2, No 2 (2017) Vol 2, No 1 (2017) Vol 1, No 2 (2016) Vol 1, No 1 (2016) Vol 7, No 2 (2015) Vol 7, No 1 (2015) Vol 6, No 2 (2014) Vol 6, No 1 (2014) Vol 5, No 2 (2013) Vol 5, No 1 (2013) Vol 4, No 2 (2012) Vol 4, No 1 (2012) Vol 3, No 2 (2011) Vol 3, No 1 (2011) Vol 2, No 2 (2010) Vol 2, No 1 (2010) Vol 1, No 2 (2009) Vol 1, No 1 (2009) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
-

Contact Email
jag.ft@ugm.ac.id

Phone
+62274-513668

Journal Mail Official
jag.ft@ugm.ac.id

Editorial Address
Geological Engineering Departement Universitas Gadjah Mada Jl. Grafika No. 2 Kampus UGM Yogyakarta 55281 Phone +62-274-513668 Fax +62-274-546039

Location
Kab. sleman,

Daerah istimewa yogyakarta

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name -

Contact Email jag.ft@ugm.ac.id

Phone +62274-513668

Journal Mail Official jag.ft@ugm.ac.id

Editorial Address Geological Engineering Departement Universitas Gadjah Mada Jl. Grafika No. 2 Kampus UGM Yogyakarta 55281 Phone +62-274-513668 Fax +62-274-546039

Location Kab. sleman, Daerah istimewa yogyakarta INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
-

Contact Email
jag.ft@ugm.ac.id

Phone
+62274-513668

Journal Mail Official
jag.ft@ugm.ac.id

Editorial Address
Geological Engineering Departement Universitas Gadjah Mada Jl. Grafika No. 2 Kampus UGM Yogyakarta 55281 Phone +62-274-513668 Fax +62-274-546039

Location
Kab. sleman,

Daerah istimewa yogyakarta

INDONESIA