Garuda - Garba Rujukan Digital

All

International Journal of Hydrological and Environmental for Sustainability

ijhes
Website

Published by Foundation of Advanced Education

ISSN : 28286405 EISSN : 28285050 DOI : -

Core Subject : Science, Agriculture, Social, Engineering,

Agriculture, Biological Sciences & Forestry Chemical Engineering, Chemistry & Bioengineering Civil Engineering, Building, Construction & Architecture Earth & Planetary Sciences Environmental Science

Journal Overview International Journal of Hydrological and Environmental for Sustainability (IJHES) [e-ISSN: 2828-5050] is an internationally recognised peer-reviewed journal for the dissemination of innovations and solutions focused on enhancing water and Environment management best practice. The journal provides a conduit between academics and practitioners. We therefore particularly encourage contributions focussed at the interface between academia and industry, which deliver industrially impactful applied research underpinned by scientific evidence. We are keen to attract papers on a broad range of subjects including water and wastewater treatment, water and air polluted, water and environmental engineering, Environmentally Friendly Architectural Engineering (Green Building) and much more. Since 2022, IJHES issues 3 times a year (February, June, and October). Please click here for more information Reasons to Publish - Publish your work in International Journal of Hydrological and Environmental for Sustainability (IJHES) is ISI listed demonstrating that your paper will be published alongside high quality, impactful research - The journals focus and scope means you will reach both the research and practitioner communities, Water and Environment Journal showcases innovative and integrated approaches to all aspects of environmental management, with a global perspective - The journal welcomes papers on a broad range of topics including all aspects of water processing and engineering, the water cycle, air pollution, waste management, and environmental conservation - Your paper will reach professionals working in academia, consultancies, Governments, regulators, NGOs and the environment sector International Journal of Hydrological and Environmental for Sustainability (IJHES) is keen to attract papers on a broad range of subjects including: - Water and waste water management - Applied science and technology for environment and sustainable energy - Geophysics and geochemistry - Environmental technology - Water and environmental engineering - Environmentally Friendly Architectural Engineering - Geothermal system - Biotechnology and Biomaterials for Sustainability - Air quality and climate change

Arjuna Subject : Ilmu Lingkungan (semua ketegori) - Ilmu Lingkungan (Lain-Lain)

Articles 24 Documents

1 2 3

Analysis of Air Pollution Level In Settlement Area Using Passive Sampler Method Normalia Djamal; Andi Suryanto; Andi Artiningsih; Nizar Nasrullah; Rosyi Damayanti T Manningtyas; Yessy Velina
International Journal of Hydrological and Environmental for Sustainability Vol 1, No 2 (2022): International Journal of Hydrological and Environmental for Sustainability
Publisher : Foundation of Advanced Education

Air pollution, especially in big cities in Indonesia, has reached a very worrying level. The main sources of air pollution come from various human activities, including industry, transportation, offices, and housing. These various activities are the biggest contribution of air pollutants that are released into the free air. In this study, observations and measurements of air pollution levels were carried out in the Final Disposal Site (FDS). The absence of good waste management in Sinjai Regency has triggered the community to manage waste by means of Open Dumping, where waste is simply dumped in a landfill without any treatment. Pollutant gas originating from the landfill will produce harmful gases, including Nitrogen Dioxide (NO2), Sulfur Dioxide (SO2) and others. This study aims to determine the concentrations of Nitrogen Dioxide (NO2) and Sulfur Dioxide (SO2) in Final Disposal Site (FDS) Tondong and in residential areas around Tondong FDS, Sinjai Regency by using the passive sampler method. The test results obtained are the NO2 value at point 1 which is 3.69 g/m3, point 2 is 5.25 g/m3, point 3 is 3.1 g/m3 and point 4 is 7.1 g/m3 with an average value The average NO2 parameter test is 4.785 g/m3. While the SO2 value at point 1 is 4.46 g/m3, point 2 is 7.34 g/m3, point 3 is 8.47 g/m3 and point 4 is 5.93 g/m3. The average value of the SO2 parameter test is 6.55 g/m3. Calculating the Air Quality Index based on the Regulation of the Minister of Environment and Forestry of the Republic of Indonesia Number 27 of 2021 concerning the Environmental Quality Index, air pollution at the Tondong Landfill is worth 93.14 indicating the very good category.

Prototype of Fire Detection Tool Using Short Message Service (SMS) Notification as A Disaster Mitigation Effort Against Environmental Damage Due to Forest Fires Aep Setiawan; Akmal Yusup; Amir Machmud
International Journal of Hydrological and Environmental for Sustainability Vol 1, No 1 (2022): International Journal of Hydrological and Environmental for Sustainability
Publisher : Foundation of Advanced Education

In relation to the threat of drought, it is necessary to do a drought analysis to evaluate the drought that has occurred. Another disaster caused by water drought is forest fires. The purpose of this study using the prototype of a Forest Fire Detection Tool (FFDT) are to early detection of forest fires and providing Short Message Service (SMS) notification of forest fires to the officer. The method of this study used a prototype of a FFDT with SMS Notification. This tool is controlled using the ATmega328 microcontroller or better known as Arduino Uno R3 and also the GSM 800L v2 module so that this tool will provide notification to forest guards in the form of sirens and SMS sounds when there are indications of smoke or fire that are identical to the event of a forest fire. Monitoring uses fire sensors, namely fire for the detection of flames that are often associated with forest fires and uses sensors as soon as possible, namely MQ2 and MQ9, all of which are equipped in one device, a forest fire detector using the Arduino Mega microcontroller. When there is a good sign that the flame or as soon as possible is read, the tool will send an SMS notification to the forest officer, the process of sending the SMS makes the fire process can detect even though it is still in a small condition or not widened.

Utilization of Industrial Flour Waste as Biobriquette Adhesive: Application on Pyrolysis Biobriquette Sawdust Red Teak Wood Harini Wahyuni; Andi Aladin; Ruslan Kalla; Muhammad Nouman; Ardimas Ardimas; MD. Shahariar Chowdhury
International Journal of Hydrological and Environmental for Sustainability Vol 1, No 2 (2022): International Journal of Hydrological and Environmental for Sustainability
Publisher : Foundation of Advanced Education

Biobriquette is one of the alternative fuels derived from biomass. The biomass used in this research is red teakwood charcoal. This research purposes to utilize red teakwood charcoal as alternative fuels and then to knows best characters compressive strength, ignition power and caloric value according to Indonesian quality standards (SNI 01-6235-2000). Characteristics of biobriquettes are known by test ash content, moisture content, volatile matter, fix carbon, compressive strength, ignition power and caloric value. The materials used are red teakwood plus industrial flour waste. The process of making biobriquette begins with drying the material, pyrolysis during 150 minutes at a temperature of 400 oC, sieved with 40 mesh. The briquetting was using a cube-shaped mold with manual pressure which was then dried in an oven to a constant weight and tested its characteristics by the ASTM (American standard Testing and material) method. The results showed that the added adhesive was very take effect in producing the best briquettes. The characteristics of briquettes with the best optimum adhesive composition produce is adhesive 5% charcoal 95% produce ash content 5.49% , moisture content 4.26 %, volatile matter 26.89 %, fix carbon 63.12%, compressive strength 3.64 kgf/cm2, caloric value 7038 kcal/kg, and ignition power 0.03 gram/minute categorized as passing the specifications for the quality requirements briquettes of SNI 01-6235-2000.

Geophysical Analysis Using Proton Precession Magnetometer GSM-19T as Information on Fault Presence in Medana, North Lombok, Indonesia Haerul Anwar; Haerul Anwar; Vico Luthfi Ipmawan; Thanaporn Sriyakul
International Journal of Hydrological and Environmental for Sustainability Vol 1, No 1 (2022): International Journal of Hydrological and Environmental for Sustainability
Publisher : Foundation of Advanced Education

Lombok island is included in one of the areas prone to earthquakes due to the existence of a subduction zone resulting from the meeting of the Indian-Australian Plate. In this study, the magnetic method was used to determine the subsurface structure of the fault as a research objective. The instrument used in this study consisted of a Proton Precession Magnetometer GSM-19T v7.0 Geomagnet measuring instrument with an accuracy of 0.1 nT to measure the total magnetic field strength. Garmin 60CSx GPS to determine position (latitude and longitude), elevation, time and point of measurement location. The geological compass determines the position and direction of the north-south fault which includes the dip/strike. Some software is also used in processing this geomagnetic data, namely Software (Numeri, Mag2DC, Surfer 9.0) and MS Excel 2013. Based on the results of data processing with 2D and Mag2DC forward modeling, the subsurface structure is obtained in the form of a normal fault, with the average susceptibility value is 0.00605 in Susceptibility (SI) which is a type of limestone. The depth of this normal fault is estimated to be at a depth of 31.5 meters to 74.0 meters.

Fast Building Identification Using Fuzzy Soft Set Based on Rapid Visual Building (RVS) Sely Novita Sari; Rizqi Prastowo; Iwan Tri Riyadi Yanto; Korhan Cengiz; Basak Ozyurt; Tuna Topac
International Journal of Hydrological and Environmental for Sustainability Vol 1, No 2 (2022): International Journal of Hydrological and Environmental for Sustainability
Publisher : Foundation of Advanced Education

Building damage can be caused by disasters such as earthquakes, landslides, etc. To minimize the fatality, the identification of buildings is needed to know the condition of buildings and whether the construction of buildings is able to endure if the disasters happen. This research uses the Rapid Visual Building (RVS) method to identify the building condition. The data are collected from Kalirejo, Kulon Progo. The survey is conducted by taking a simple building evaluation form (typical of the walls ) based on RVS data. The field assessment results are distinguished into several factors that affect the condition of typical building walls: the foundations, structures, walls, and roofs of the 11 categories on the assessment form. From the data obtained, it is used to classify the building condition using Fuzzy Soft Set. The results show that the classification has been made with good performance in terms of accuracy, precision and time response. The accuracy and recall are close to 100% with above 50% of prevision average and time response is quite 0.0051 second. Thus, it can be used to predict the condition of buildings accurately.

Application of Mine Dewatering Methods to Reduce Wastewater Pollution in The Environment: Implications for Andesite Mining A.A Inung Arie Adnyano; Rizqi Prastowo; Muhammad Nauval Bahy; Syouma Hikmahtiar; Ahmad Said; Abdul Latif Ashadi
International Journal of Hydrological and Environmental for Sustainability Vol 1, No 1 (2022): International Journal of Hydrological and Environmental for Sustainability
Publisher : Foundation of Advanced Education

Wastewater pollution in mining areas often occurs and becomes a problem in the surrounding groundwater aquifer system. One of the efforts to determine the distribution of wastewater pollution is to calculate the discharge and volume of wastewater. In this study, an open channel in the form of a ditch or commonly referred to as a drainage system is carried out to determine the total water discharge entering the research location, design the dimensions of the sump and design the optimal cross-sectional dimensions of the ditch to overcome the discharge of water that comes out and pollutes the environment. The method used is to make an open channel in the form of a trapezoid to be used around the andesite rock mining site which then drains the mine water to the setlingpond. Efforts to drain the water that has entered the main sump (mine dewatering system) are carried out by making wells, after which the waste water is channeled into the settling pond using a pump. From the results of the study, information was obtained that the total water discharge entering the sump was 235,175 m so that the volume of the sump made was 300 m with dimensions of top area: 20m x 10m, bottom area: 10m x 10m, with a depth of 2m for total water discharge for ditches. 0.0237 m so that the volume of the trench made is 0.228 m.

Avtur Waste Treatment to Produce Useful Fuel Products based on ASTM Standard Dwi Nurhudaeni; Zakir Sabara; Andi Suryanto; Belda Amelia Junisu; Iva Yenis Septiariva; Riza Aldiansyah Fanani
International Journal of Hydrological and Environmental for Sustainability Vol 1, No 2 (2022): International Journal of Hydrological and Environmental for Sustainability
Publisher : Foundation of Advanced Education

The many avtur samples that are tested every month has an impact on avtur waste that accumulates in the PT. Pertamina Lubricant PU Jakarta laboratory. Avtur wastes are usually just thrown away without being processed again. This study focuses on the utilization of avtur test results waste by knowing the quality of avtur waste with flash point, distillation, freezing point, density and color test parameters. The aims of this research are to solve the problem of waste from avtur testing results by reusing avtur waste to become a product so as to reduce the occurrence of losses. The first step is to prepare a sample of waste from avtur test results and then perform tests on the flash point, distillation, freezing point, density and color test parameters. After that, avtur waste was formulated: avtur ASTM standard T.107 with variations in the formulation, namely 5% LA : A, 10% LA : A, 15% LA : A and 20% LA : A. After that, the mixing process was carried out for 15 minutes using a stirrer motor with a speed of 300 rpm (rotations per minute). Then flash point, distillation, freezing point, density and color tests were carried out to get results that match the specifications of the avtur. The results showed that the formulation of the avtur test results: avtur according to American Standard Testing and Material (ASTM) standard had met the avtur specifications. Where the best formulation was found in 10% avtur waste formulation with test value of color : 25, density : 802.4 Kg/m3, flash point : 42.5 oC, freezing point : -55.0 oC and distillation (IBP : 156.0 oC, 10 % : 172.0 oC, 50% : 194.0 oC , 90% : 225.0 oC, End Point : 257.0 oC. Based on the results of the formulation testing that has been carried out, the avtur test results formulated with ASTM standard for avtur have met the company's quality standards.

Analysis of Shallow Groundwater Quality as Consumable Water in Maros Baru District Aquifer Systems, South Sulawesi, Indonesia Emi Prasetyawati Umar; Alfian Nawir; Hariani M. Pakka; Jamaluddin Jamaluddin; Nurfadhilah Sam Tappa; Watcharin Joemsittiprasert
International Journal of Hydrological and Environmental for Sustainability Vol 1, No 1 (2022): International Journal of Hydrological and Environmental for Sustainability
Publisher : Foundation of Advanced Education

Water is a source of necessity for humans. Water quality is very important to be considered as the source of clean water. Some people in Maros Baru District use ground wells as the source of water needs. Therefore it is important to know the physical quality and pH level of shallow wells and to know the worthiness of shallow wells in Maros Baru District with reference to Permenkes No.492/ 2010. This study examined the feasibility of water based on the physical quality and the pH level of water taken from shallow wells. The research was carried out directly in field with 14 sampling points scattered in the north, east, south, west and at the center of field. The method in observing pH value is by litmus paper and observation on the physical condition of water, well depth, well diameter and surface level of water. The result shows there were 2 locations with saltwater taste, as the location is near from the sea and rivers, while turbidity of the water influenced by condition of surround environment that was not properly maintained. From data processing, it can be concluded that as many as 5 of the 14 sampling points did not meet the eligibility standards of Permenkes No.492/2010 to be used as a source of clean water intended for drinking water.

Identification of Seawater Intrusion Using Geoelectrical Method with Wenner-Schulumberger Configuration: A Case Study in Southern Tolonuo Island, North Halmahera Regency, Indonesia Nikodemus Kalilu; Bayu Achil Sadjab; Masitah Yusniar; Kurnia Kurnia; Elok Surya Pratiwi
International Journal of Hydrological and Environmental for Sustainability Vol 1, No 2 (2022): International Journal of Hydrological and Environmental for Sustainability
Publisher : Foundation of Advanced Education

Research on seawater intrusion has been carried out on the southern Tolonuo island, Tobelo sub-district, North Halmahera Regency, Indonesia using the Wenner-Schlumberger configuration resistivity geoelectric method supported by the Naniura NRD 300 HF tool, this study aims to determine the distribution pattern of seawater intrusion and to determine the resistivity value of each subsurface rock layer in the study area. The measurement results are processed using the RES2DINV software to obtain a 2-D pseudo resistivity section that describes the distribution value of the layer that the soil surface is shown in color images. The measurement results on line 1 show that there is seawater intrusion with a resistivity value range of 0.338 m - 2.44 m which is at 4 – 20 meters with a certain pattern, line 2 also has sea water intrusion at a depth of 5 m – 20 m with a resistivity value of 1.31 Ωm – 6.50 Ωm. On line 3, it is clear that there is a good correlation between the intersection of line 1 and line 2, where there is a low resistivity contrast on the line 1 with a stretch of 35 m – 50 m at a depth of 10 m – 20 m and the line 2 with a span of 80 m - 100 m at a depth of 10 m - 20 m. The distribution pattern of seawater intrusion from the south to the north of Tolonou Village with a wide range of up to 200 meters from residential areas from the shoreline. The research area has layers of clay rock with a resistivity value between 30 – 80 Ωm, and breccia rocks around it with a resistivity value of 100 – 200 Ωm. On the other hand, between clay and breccia there is impermeable rock which is thought to be conglomerate rock with a resistivity value of 200-500 Ωm, besides that in the study area there is also a layer suspected to be a groundwater aquifer layer with a resistivity value (ρ) 10 m.

The Effectiveness of Sump Dimension Design: A Case Study in Nickel Mining Excellentia Riane Kapugu; A.A. Inung Arie Adnyano; Rizqi Prastowo; Akhmad Zamroni; Manmeet Kaur; Nameeta Brahme
International Journal of Hydrological and Environmental for Sustainability Vol 1, No 1 (2022): International Journal of Hydrological and Environmental for Sustainability
Publisher : Foundation of Advanced Education

The presence of water in mining activities is common, especially in tropical areas that have high rainfall, such as the research location at PT ANTAM Maluku Utara at the Moronopo Site. While the sump maintenance needs to be considered so that the sump can accommodate the incoming discharge. The purpose of this research is to calculate the total discharge entering the mine and to design the dimensions of the sump according to the incoming water discharge. The research method used is the Gumbel method starting from the analysis of rainfall data at the research location starting in 2004-2013 and then continuing with 2019-2020 data, the planned rainfall value is 96.56 mm/day, rainfall intensity is 15.63 mm/day hours with a rain return period of 25 years and a hydrological risk of 18.46 % and the total inflow of mine water is 17,556 m3/hour. After calculating the sump capacity in the Danis 2 area, it still has not accommodated the incoming discharge with the remaining unaccommodated discharge of 2,319.1 m3/hour.

Page 1 of 3 | Total Record : 24

1 2 3

Filter by Year

2022 2023

Filter By Issues

All Issue Vol 2, No 2 (2023): International Journal of Hydrological and Environmental for Sustainability Vol 2, No 1 (2023): International Journal of Hydrological and Environmental for Sustainability Vol 1, No 3 (2022): International Journal of Hydrological and Environmental for Sustainability Vol 1, No 2 (2022): International Journal of Hydrological and Environmental for Sustainability Vol 1, No 1 (2022): International Journal of Hydrological and Environmental for Sustainability

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Rofiqul Umam

Contact Email
rofiqulumam.geoscience@gmail.com

Phone
+6289611586012

Journal Mail Official
ijhes.editor.foundae@gmail.com

Editorial Address
Jl. Pramuka Gg. Darfa LK. II, Kel. Langkapura, Kec. Langkapura, Kota Bandar Lampung, Indonesia

Location
Kota bandar lampung,

Lampung

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Rofiqul Umam

Contact Email rofiqulumam.geoscience@gmail.com

Phone +6289611586012

Journal Mail Official ijhes.editor.foundae@gmail.com

Editorial Address Jl. Pramuka Gg. Darfa LK. II, Kel. Langkapura, Kec. Langkapura, Kota Bandar Lampung, Indonesia

Location Kota bandar lampung, Lampung INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Rofiqul Umam

Contact Email
rofiqulumam.geoscience@gmail.com

Phone
+6289611586012

Journal Mail Official
ijhes.editor.foundae@gmail.com

Editorial Address
Jl. Pramuka Gg. Darfa LK. II, Kel. Langkapura, Kec. Langkapura, Kota Bandar Lampung, Indonesia

Location
Kota bandar lampung,

Lampung

INDONESIA