cover
Contact Name
Istadi
Contact Email
istadi@che.undip.ac.id
Phone
+6281316426342
Journal Mail Official
bcrec@live.undip.ac.id
Editorial Address
Editorial Office of Bulletin of Chemical Reaction Engineering & Catalysis Laboratory of Plasma-Catalysis (R3.5), UPT Laboratorium Terpadu, Universitas Diponegoro Jl. Prof. Soedarto, Semarang, Central Java, Indonesia 50275
Location
Kota semarang,
Jawa tengah
INDONESIA
Bulletin of Chemical Reaction Engineering & Catalysis
ISSN : -     EISSN : 19782993     DOI : https://doi.org/10.9767/bcrec
Bulletin of Chemical Reaction Engineering & Catalysis, a reputable international journal, provides a forum for publishing the novel technologies related to the catalyst, catalysis, chemical reactor, kinetics, and chemical reaction engineering. Scientific articles dealing with the following topics in chemical reaction engineering, catalysis science, and engineering, catalyst preparation method and characterization, novel innovation of chemical reactor, kinetic studies, etc. are particularly welcome. However, articles concerned on the general chemical engineering process are not covered and out of the scope of this journal. This journal encompasses Original Research Articles, Review Articles (only selected/invited authors), and Short Communications, including: fundamentals of catalyst and catalysis; materials and nano-materials for catalyst; chemistry of catalyst and catalysis; surface chemistry of catalyst; applied catalysis; applied bio-catalysis; applied chemical reaction engineering; catalyst regeneration; catalyst deactivation; photocatalyst and photocatalysis; electrocatalysis for fuel cell application; applied bio-reactor; membrane bioreactor; fundamentals of chemical reaction engineering; kinetics studies of chemical reaction engineering; chemical reactor design (not process parameter optimization); enzymatic catalytic reaction (not process parameter optimization); kinetic studies of enzymatic reaction (not process parameter optimization); the industrial practice of catalyst; the industrial practice of chemical reactor engineering; application of plasma technology in catalysis and chemical reactor; and advanced technology for chemical reactors design. However, articles concerned about the "General Chemical Engineering Process" are not covered and out of the scope of this journal.
Articles 21 Documents
Search results for , issue "2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022)" : 21 Documents clear
Backmatter (Publication Ethics, Copyright Transfer Agreement for Publishing Form)
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.2.14779.App.1-App.5

Abstract

Synthesis, Crystal Structure and Catalytic Activity of Tri-Nuclear Zn(II) Complex Based on 6-Phenylpyridine-2-carboxylic Acid and Bis(4-pyridyl)amine Ligands Li-Hua Wang; Fan-Yuan Kong; Tai Xi-Shi
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.2.13952.394-402

Abstract

A new trinuclear Zn (II) complex, [Zn3(L1)4(L2)2(CH3COO)2] (1) (HL1 = 6-phenylpyridine-2-carboxylic acid, L2 = bis(4-pyridyl)amine) has been synthesized by 6-phenylpyridine-2-carboxylic acid, NaOH, bis(4-pyridyl)amine and Zn(CH3COO)2•2H2O. The complex 1 has also been structural characterized by elemental analysis and single crystal X-ray diffraction. The results reveals that complex 1 is made up of three Zn(II) ions, four L1 ligands, two L2 ligands and two CH3COO- anions. In 1, both Zn1 ion and Zn1a ion are five-coordinated with two O atoms from two different L1 ligands, two N atoms from two different L1 ligands, and one N atoms from bis(4-pyridyl)amine ligand, respectively, and forms a distorted trigonal biyramid geometry. And Zn2 ion is four-coordinated with two O atoms from two different CH3COO− anions and two N atoms from two different L2 ligands, forming a distorted tetrahedral geometry. Complex 1 displays a 3D network structure by the intermolecular N−H···O hydrogen bonds. The catalytic performance for oxidation of benzyl alcohol with O2 was studied under mild reaction conditions using complex 1 as catalyst. The results demonstrated that the catalysts were very active, and the yield of benzaldehyde was 50.8% at 90 °C with THF as solvent under 0.5 MPa O2 within 3 h. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 
Green Synthesis, Characterization, and Catalytic Activity of Amine-multiwalled Carbon Nanotube for Biodiesel Production Maria Cristina Arboleda Macawile; Alva Durian; Rugi Vicente Rubi; Armando Quitain; Tetsuya Kida; Raymond Tan; Luis Razon; Joseph Auresenia
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.2.13402.286-303

Abstract

An amine-functionalized multiwalled carbon nanotube (MWCNT) was prepared for use as a basic heterogeneous catalyst for the conversion of Cocos nucifera (coconut) oil and Hibiscus cannabinus (kenaf) oil to biodiesel. The 3-aminopropyltrimethoxysilane (3-APTMS) was chosen to form an amine-reactive surface to bind with hydroxyl (−OH) and carboxyl (−COOH) groups of oxidized MWCNT. Silanization took place using a green surface modification method in which supercritical carbon dioxide fluid was utilized under the following conditions: 55 °C, 9 MPa, and 1 h. The synthesized catalyst was characterized using Thermogravimetric analysis (TGA), Fourier transform infrared (FTIR), Field emission scanning electron microscopy–energy dispersive x-ray (FESEM-EDX), Time-of-flight secondary ion mass spectrometry (TOF-SIMS), X-ray powder diffraction (XRD), and Brunauer–Emmett-Teller (BET). Transesterification of coconut oil using 10 wt% NH2-MWCNT catalyst (3 wt% APTMS), 12:1 molar ratio of methanol and oil at 63 °C for 1 h resulted in a >95% conversion. On the other hand, the same catalyst was used in the transesterification of kenaf oil, and formation of ammonium carboxylated salt was observed. The effects of temperature, pressure, and silane concentration on surface modification of MWCNT were evaluated in terms of the catalyst’s basic site density and fatty acid methyl ester conversion. The results indicate that reaction temperature and silane concentration had the most significant effects. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 
Photodegradation of Rhodamine-B Dye under Natural Sunlight using CdO Dipali Lavate; Vikas Sawant; Ashok Khomane
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.2.14172.466-475

Abstract

The present study includes synthesis of CdO thin film by simple and cost effective chemical bath deposition method. Cadmium monochloroaceatate were used for preparation of CdO thin film.  The structural, optical properties of CdO thin film were investigated with the help of X-ray diffraction (XRD) and UV-Vis NIR double beam spectrometry. The XRD studies revealed that annealed thin film shows crystalline in nature having 48.4 nm in size. The optical band gap of thin film was found to be 2.13 eV. Scanning Electron Microscopy (SEM) images shows sphere like structure which is closely arranged with each other. The presence of functional group was confirmed by Fourier Transform Infra Red (FTIR). Brunauer–Emmett–Teller (BET) surface area analysis confirm formation of a mesoporous CdO with 6.01 m2/g surface area and 31.96 nm average pore diameter. The photocatalytic activity of prepared thin film was checked by using Rhodamine-B as a model dye under natural sunlight and found to be 48%. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 
H2O2 Exfoliation of TiO2 for Enhanced Hydrogen Production from Photocatalytic Reforming of Methanol Syaahidah Abdul Razak; Hasliza Bahruji; Abdul Hanif Mahadi; Hong Wan Yun
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.2.13920.420-429

Abstract

Hydrogen is considered a future energy carrier for clean and sustainable technology. Photocatalytic reforming of methanol produced hydrogen using water and energy from sunlight. This study reported enhanced activity of TiO2 without metal co-catalyst for hydrogen production following H2O2 exfoliation. TiO2 was transformed into peroxo-titania species on the outer layer of the particles, resulting in surface exfoliation. The exfoliation reduced TiO2 crystallite sizes enhanced the surface hydroxyl group and reduced the band gap to 3.0 eV. Hydrogen production from methanol-water mixtures on the TiO2 after four consecutive exfoliations was measured at 300 µmol, significantly higher than the fresh TiO2 (50 µmol).  H2O2 exfoliated TiO2 reduced the pathway for charge migration to the surface.  A high concentration of surface hydroxyl group trapped the charge carriers for efficient hydrogen production. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 
Effect of pH on the Performance of Bi2O2CO3 Nanoplates for Methylene Blue Removal in Water by Adsorption and Photocatalysis Trung Thanh Nguyen; Tri Thich Le; Thi Bao Tran Nguyen; Thuy Nguyen Thi; Le Ba Tran; Thi Quynh Anh Nguyen; Nhat Huy Nguyen
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.2.13370.331-339

Abstract

In this study, a facile low-temperature hydrothermal method was applied for the synthesis of bismuth subcarbonate nanoplates (Bi2O2CO3). The material was then characterized by FTIR, XRD, SEM, BET, and TGA. The applicability of Bi2O2CO3 was evaluated via the treatment of methyl blue (MB) in water by adsorption and photocatalytic degradation. The experiment results with different pH from 2 to 12 indicate that the pH of the solution affected the surface charge of the synthesized Bi2O2CO3, thus having strong effects on the adsorption and photocatalytic degradation abilities of Bi2O2CO3 for MB removal. In adsorption tests, pH 6–7 is the most suitable condition for the adsorption of Bi2O2CO3. In photocatalytic tests, Bi2O2CO3 had the highest and lowest efficiencies of 64.19% (pH 5) and 17.59% (pH 2), respectively, under UV irradiation for 300 min. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Palladium Complexes Catalysed Telomerisation of Arylamines with Butadiene and Their Cyclisation into Quinoline Derivatives Ramil Zaripov; Ramil Khusnitdinov; Ekaterina Ganieva; Razida Ishberdina; Kamil Khusnitdinov; Ildus Abdrakhmanov
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.2.13500.322-330

Abstract

Since alkynyl-arylamines are widely used in the chemical industry as pre products, a method of catalytic synthesis of problematic substituted quinolines from aromatic amines containing octadienal substituents has been developed. For this purpose, the processes of N-2,7-octa-dienyl anilines cyclisation under the action of transition metal complexes and telomerisation of arylamines with butadiene in the presence of palladium complexes were studied. Suppose N-2,7-octa-dienyl anilines are synthesised by telomerisation of arylamines with butadiene in the presence of palladium complexes. In that case, the cyclisation process is carried out in the presence of catalytic amounts of Pd(II) complex with dimethyl sulfoxide or nitrobenzene. The conducted research made it possible to study the opportunity of obtaining in one stage aromatic amines substituted in the nucleus by the reaction of butadiene with arylamines in the presence of palladium complexes. The research proved the principal possibility of obtaining ortho-substituted naphthylamines from butadiene and corresponding naphthylamines in one stage. A catalytic method for the synthesis of problematic substituted quinolines in the presence of palladium complexes has been developed. It has been established that the cyclisation of N-octadienyl-arylamines into quinolines proceeds through the stage of Kleisen amino rearrangement. N-2,7-octa-dienyl anilines and their derivatives can be widely used in the paint, pharmaceutical and chemical industries. Quinoline alkenylene derivatives can be used to produce unique polymer materials, hardeners, stabilisers, extractants, sorbing agents, catalysts for the synthesis of polyurethanes, biologically active substances and their analogues. They are pre-products in synthesising alkaloids, medicines and products used in agriculture. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 
Synthesis, Structural Characterization of a New Ni(II) Complex and Its Catalytic Activity for Oxidation of Benzyl Alcohol Li-Hua Wang; Fan-Yuan Kong; Xi-Shi Tai
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.2.13975.375-382

Abstract

In ethanol-water (v:v = 1:1), a new Ni(II) complex, [Ni(L)2(H2O)2] (1) (HL = 6-phenylpyridine-2-carboxylic acid) was synthesized using 6-phenylpyridine-2-carboxylic acid, NaOH and Ni(CH3COO)2.4H2O. The structure of complex 1 has been determined by elemental analysis and single crystal X-ray diffraction. The single crystal analysis shows that complex 1 contains one Ni(II) ion, two L ligands and  two coordinated water molecules. In 1, the Ni(II) ion is six-coordinated to two O atoms and two N atoms from L ligands and two O atoms from coordinated water molecules, respectively, which form a distorted octahedral coordination geometry. The whole unit of complex 1 is interconnected to each other through intermolecular N−H•••O hydrogen bonds involving oxygen atom of coordinated water molecule and the oxygen atoms of  L ligand to form 1D molecular architecture. The catalytic activity of complex 1 for oxidation of benzyl alcohol with O2 was investigated. The complex 1 shows good catalytic performance for the oxidation of benzyl alcohol, the benzyl alcohol conversion, benzaldehyde selectivity, and benzaldehyde yield were 49.1%, 92.0%, and 45.2%, respectively, at 90 °C under 0.7 Mpa O2 for 2 h. Moreover, complex 1 could be recovered easily by centrifugation and used repetitively for at least four times. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Photocatalytic Efficiency of Titanium Dioxide for Dyes and Heavy Metals Removal from Wastewater Suresh Sagadevan; Is Fatimah; Titus Chinedu Egbosiuba; Solhe F. Alshahateet; J. Anita Lett; Getu Kassegn Weldegebrieal; Minh-Vien Le; Mohd Rafie Johan
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.2.13948.430-450

Abstract

The hazardous toxicity of dye materials, even in low concentrations, harms ecological systems. It releases a large number of contaminants into the water, resulting as waste water. Dyes prevent the process of photosynthesis by obstructing light passage, lowers the oxygen levels dissolved in the water. Also, a good number of the dyes and heavy metals are carcinogenic and mutagenic to human beings. Heterogeneous photocatalysis is a promising technology for removing organic, inorganic, and microbial pollutants from water and wastewater. It is preferable to other conventional wastewater treatment approaches due to its benefit, such as low cost, environmental friendliness, ability to proceed at ambient temperature and pressure conditions, and to completely degrade pollutants into environmentally safe products with suitable measures. The titanium oxide (TiO2) is one of the most promising material that has gained enormous importance in the field of energy and environmental applications. The unique physicochemical properties of TiO2 make it one of the best candidates among existing photocatalysts. This review provides an overview of strategies employed to augment its catalytic performance as well as the impact of different operational parameters on the removal proficiency of various organic and inorganic pollutants in water and wastewater treatment. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Photocatalytic Degradation of Malachite Green by Layered Double Hydroxide Based Composites Nova Yuliasari; Alfan Wijaya; Risfidian Mohadi; Elfita Elfita; Aldes Lesbani
Bulletin of Chemical Reaction Engineering & Catalysis 2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022)
Publisher : Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.9767/bcrec.17.2.13482.240-249

Abstract

Studies of LDH materials to be applied as photocatalyst for dye pollutant degradation have been developed. These interesting efforts are inseparable from the investigation of degradation performance and competitive synthetic methods. Composites based on Zn/Al and Mg/Al layered double hydroxides (LDHs) with ZnO and TiO2 were prepared by coprecipitation-impregnation method following by calcination at 300 °C to forms Zn/Al-ZnO, Mg/Al-ZnO, Zn/Al-TiO2, and Mg/Al-TiO2. Composites were characterized by XRD, FTIR, SEM and UV-DRS. Photodegradation of malachite green (MG) was carried out, after optimization of pH, catalyst loading and contact time in batch system under UV irradiation. XRD and spectroscopic data shows composites were successfully formed indicated by formation of both pristine materials. Degradation of malachite green showed that composites as photocatalyst have higher catalytic activity than pristine LDHs. LDH-ZnO composite have better activity, energy band gap and degradation reusability than LDH-TiO2. The Zn/Al-ZnO and Zn/Al-TiO2 composites degraded 97.1% and 96.3% MG, whereas the Mg/Al-ZnO and Mg/Al-TiO2 composites were able to degrade 99.8% and 98.6% MG, respectively. Copyright © 2022 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Page 2 of 3 | Total Record : 21


Filter by Year

2022 2022


Filter By Issues
All Issue 2024: BCREC Volume 19 Issue 1 Year 2024 (April 2024) 2024: Just Accepted Manuscript and Article In Press 2024 2023: BCREC Volume 18 Issue 4 Year 2023 (December 2023) 2023: BCREC Volume 18 Issue 3 Year 2023 (October 2023) 2023: BCREC Volume 18 Issue 2 Year 2023 (August 2023) 2023: BCREC Volume 18 Issue 1 Year 2023 (April 2023) 2022: BCREC Volume 17 Issue 4 Year 2022 (December 2022) 2022: BCREC Volume 17 Issue 3 Year 2022 (September 2022) 2022: BCREC Volume 17 Issue 2 Year 2022 (June 2022) 2022: BCREC Volume 17 Issue 1 Year 2022 (March 2022) 2021: BCREC Volume 16 Issue 4 Year 2021 (December 2021) 2021: BCREC Volume 16 Issue 3 Year 2021 (September 2021) 2021: BCREC Volume 16 Issue 2 Year 2021 (June 2021) 2021: BCREC Volume 16 Issue 1 Year 2021 (March 2021) 2020: BCREC Volume 15 Issue 3 Year 2020 (December 2020) 2020: BCREC Volume 15 Issue 2 Year 2020 (August 2020) 2020: BCREC Volume 15 Issue 1 Year 2020 (April 2020) 2019: BCREC Volume 14 Issue 3 Year 2019 (December 2019) 2019: BCREC Volume 14 Issue 2 Year 2019 (August 2019) 2019: BCREC Volume 14 Issue 1 Year 2019 (April 2019) 2018: BCREC Volume 13 Issue 3 Year 2018 (December 2018) 2018: BCREC Volume 13 Issue 2 Year 2018 (August 2018) 2018: BCREC Volume 13 Issue 1 Year 2018 (April 2018) 2017: BCREC Volume 12 Issue 3 Year 2017 (December 2017) 2017: BCREC Volume 12 Issue 2 Year 2017 (August 2017) 2017: BCREC Volume 12 Issue 1 Year 2017 (April 2017) 2016: BCREC Volume 11 Issue 3 Year 2016 (December 2016) 2016: BCREC Volume 11 Issue 2 Year 2016 (August 2016) 2016: BCREC Volume 11 Issue 1 Year 2016 (April 2016) 2015: BCREC Volume 10 Issue 3 Year 2015 (December 2015) 2015: BCREC Volume 10 Issue 2 Year 2015 (August 2015) 2015: BCREC Volume 10 Issue 1 Year 2015 (April 2015) 2014: BCREC Volume 9 Issue 3 Year 2014 (December 2014) 2014: BCREC Volume 9 Issue 2 Year 2014 (August 2014) 2014: BCREC Volume 9 Issue 1 Year 2014 (April 2014) 2013: BCREC Volume 8 Issue 2 Year 2013 (December 2013) 2013: BCREC Volume 8 Issue 1 Year 2013 (June 2013) 2013: BCREC Volume 7 Issue 3 Year 2013 (March 2013) 2012: BCREC Volume 7 Issue 2 Year 2012 (December 2012) 2012: BCREC Volume 7 Issue 1 Year 2012 (June 2012) 2011: BCREC Volume 6 Issue 2 Year 2011 (December 2011) 2011: BCREC Volume 6 Issue 1 Year 2011 (June 2011) 2010: BCREC Volume 5 Issue 2 Year 2010 (December 2010) 2010: BCREC Volume 5 Issue 1 Year 2010 (June 2010) 2009: BCREC Volume 4 Issue 2 Year 2009 (December 2009) 2009: BCREC Volume 4 Issue 1 Year 2009 (June 2009) 2008: BCREC Volume 3 Issue 1-3 Year 2008 (December 2008) 2007: BCREC: Volume 2 Issues 2-3 Year 2007 (October 2007) 2007: BCREC: Volume 2 Issue 1 Year 2007 (June 2007) More Issue