Garuda - Garba Rujukan Digital

DEVELOPMENT OF LEARNING DEVICES OF BASIC ELECTRONIC VIRTUAL LABORATORY BASED ON PSPICE SOFTWARE Muchlas, Muchlas; Budiastuti, Pramudita
Journal of Vocational Education Studies Vol 3, No 1 (2020)
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/joves.v3i1.2085

The availability of modules to support basic electronic practices based on virtual laboratories has not yet met the needs. The purpose of this development research is to produce basic electronic practice learning devices based on the PSPICE application program. The development procedure uses ADDIE (analysis, design, development, implementation, evaluation). ADDIE is used to direct the design process as specified. Product performance was tested using ongoing formative evaluation. The product feasibility test uses a comparative analysis of the results of the PSPICE experiment against the theory. The results show that all modules developed can display the same characteristics as their theoretical character. The results show that the modules have very good performance. Modules are suitable for use as a medium for basic electronic practice using PSPICE-based virtual laboratories. The products are in the form of electronic circuits with 31 schematic PSPICE formats. Product results to support basic electronic practices covering topics: capacitor filling and discharging, RC circuits, diode characteristics, wave forming circuits, rectifier circuits, voltage clamp, voltage circuits, transistor characteristics, and amplifier transistor.

E-Instructional Multimedia in Basic Concepts of Electrical and Electronic Lessons Budiastuti, Pramudita; Khairudin, Moh.; Azman, M.N.A
Jurnal Pendidikan Teknologi dan Kejuruan Vol 24, No 2 (2018): (October)
Publisher : Faculty of Engineering, Universitas Negeri Yogyakarta

Interactive learning media facilitate students to be understand and comprehend certain contents of engineering subjects. Therefore, this study aimed to develop e-instructional multimedia for students in the subject of basic electronics and electricity using adobe flash CS 5.5. This subject was selected to support the teaching-learning process at the Vocational Secondary Schools. There were five stages during the development of the learning media, including (1) analysis, (2) design, (3) development, (4) implementation, and (5) evaluation (ADDIE). Furthermore, 30 students in total were selected to test the media practicability. The results revealed that this multimedia is acceptable based on five criteria: creativity, affectivity, efficiency, interestingly, and interactivity with the scores of 76.8, 76.8, 71.5, 77.4, and 74.4 respectively. This study suggested the implementation of the e-instructional multimedia for further understanding its empirical application.

Strengthening information technology literacy through online learning training for teachers of Vocational High Schools in Lubuklinggau City Budiastuti, Pramudita; Triatmaja, Adhy Kurnia; Oktavian, Waznan Fauzi; Sofyan, Esfan
Community Empowerment Forthcoming issue
Publisher : Universitas Muhammadiyah Magelang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31603/ce.5117

Pemanfaatan Teknologi Informasi (TI) di Sekolah Menengah Kejuruan Negeri (SMK N) 4 Kota Lubuklinggau masih belum optimal. Penggunaan sarana dan media pembelajaran yang ada belum maksimal, meskipun sudah tersedia fasilitas wifi. Pembelajaran selama masa pandemi Covid-19 belum sesuai yang diharapkan karena kesiapan guru dalam literasi TI masih kurang. Keaktifan siswa pada proses pembelajaran daring di masa pandemi Covid-19 masih rendah, hal ini dapat ditinjau dari sikap siswa dalam mengikuti pembelajaran di platform Google Classroom dan WhatssApp. Kegiatan diawali dengan peserta mengikuti tes awal (pre-test), kemudian peserta mengikuti pelatihan dengan materi penguatan literasi TI, dan pengembangan Google Classroom dan Kahoot dalam pembelajaran daring. Kegiatan dilanjutkan dengan tugas mandiri dan evaluasi. Berdasarkan evaluasi tugas mandiri, didapatkan hasil dengan kategori baik. Tingkat pemahaman materi â€œpenguatan literasi TIâ€ sebesar 81.30%, pemahaman materi â€œpengembangan Google Classroom dalam pembelajaran daringâ€ sebesar 82.72%, dan pemahaman materi â€œpengembangan Kahoot dalam pembelajaran daringâ€ sebesar 82.69%.

ANALISIS TUJUAN PEMBELAJARAN DENGAN KOMPETENSI DASAR PADA RENCANA PELAKSANAAN PEMBELAJARAN DASAR LISTRIK DAN ELEKTRONIKA DI SEKOLAH MENENGAH KEJURUAN Pramudita Budiastuti; Sunaryo Soenarto; Muchlas Muchlas; Hanafi Wahyu Ramndani
Jurnal Edukasi Elektro Vol 5, No 1 (2021): Jurnal Edukasi Elektro, Volume 5, Nomor 1, 2021
Publisher : JPTE FT UNY

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jee.v5i1.37776

ABSTRACT:This study aims to determine the conformity between learning objectives with basic competencies. This research is a document analysis research. The subject of this research is the lesson plan of electric power installation engineering teachers in basic electricity and electronics subjects in vocational high schools in Yogyakarta. Data collection used document observation sheets that were filled in by instructional design experts. Document observation sheets were validated through expert judgments and did the reliability test using Cohen Kappa. The data analysis technique used descriptive statistics. The results of the conformity between the design of learning objectives and basic competencies are classified according to the indicated percentage of mean value of 65.03%.ABSTRAK:Penelitian ini bertujuan untuk mengetahui keselarasan tujuan pembelajaran dengan kompetensi dasar. Penelitian ini merupakan penelitian analisis dokumen. Subjek penelitian ini adalah Rencana Pelaksanaan Pembelajaran (RPP) guru teknik instalasi tenaga listrik pada mata pelajaran dasar listrik dan elektronika SMK di Kota Yogyakarta. Pengumpulan data menggunakan lembar pengamatan dokumen yang diisi oleh ahli desain instruksional. Lembar pengamatan dokumen divalidasi melalui expert judgements dan reliabilitas diuji dengan Cohen Kappa. Teknik analisis data menggunakan statistik deskriptif. Hasil penelitian keselarasan desain tujuan pembelajaran dengan kompetensi dasar tergolong sesuai dengan penunjukkan persentase nilai rerata sebesar 65,03%.

The Influence of Discipline, Responsibility, Cooperation, and Problem Awareness on Employability Skills Budi Santosa; Pramudita Budiastuti; Purnawan Purnawan; Muhammad Sayuti
Jurnal Pendidikan Teknologi dan Kejuruan Vol 27, No 1 (2021): (May)
Publisher : Faculty of Engineering, Universitas Negeri Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jptk.v27i1.38085

The purpose of this study was to analyze the influence of discipline, cooperation, responsibility, and problem awareness on employability skills individually and collectively. This study also aims to predict other factors that affect employability skills. The research method used correlational quantitative. Regression analysis was used to predict other factors that affect employability skills. The respondents consisted of 323 students from Muhammadiyah Vocational High Schools in Yogyakarta Province. The results showed that; (1) there is a significant effect between discipline and employability skills with an r-value of 0.588, (2) there is a significant influence between responsibility and employability skills with an r-value of 0.568, (3) there is a significant effect between collaboration and employability skills with an r-value of 0.501, (4) there is a significant effect between awareness of the problem and employability skills, with an r-value of 0.450, (5) there is a significant effect together between discipline, responsibility, cooperation, and awareness of the problem with employability skills with an r-value of 0.691.

Development of Work-Based Skills Competence Test Model For Vocational High School Student on Internship Program Kusmini Kusmini; Budi Santosa; Pramudita Budiastuti; Fatwa Tentama; Esfan Sofyan
JURNAL DIMENSI PENDIDIKAN DAN PEMBELAJARAN Vol 9, No 1 (2021): January 2021
Publisher : Jurnal Dimensi Pendidikan dan Pembelajaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24269/dpp.v9i1.2486

AbstrakPenelitian ini bertujuan untuk menemukan model uji kompetensi perbankan syariah yang layak diimplementasikan di Sekolah Menengah Kejuruan (SMK) kompetensi keahlian perbankan syariah. Model uji kompetensi yang dimaksud adalah uji kompetensi yang memadukan antara proses pembelajaran di dunia industri melalui Praktik Kerja Lapangan (PKL) dengan uji kompetensi yang dilaksanakan di sekolah. Penelitian ini menggunakan metode penelitian dan pengembangan (research and development) yang dikembangkan oleh Borg Gall dan dimodifikasi oleh Sukmadinata, yang terdiri dari tahap pendahuluan, pengembangan dan pengujian. Penelitian ini dilakukan di SMK Muhammadiyah 1 Cilacap, dan enam tempat PKL yaitu, Bank Perkreditan Rakyat Syariah (BPRS) Gunung Slamet, BPRS Suriyah, Baitul Mal waTamwil (BMT) Muhammadiyah, BMT Mentari Umat, BMT BEST, dan BMT Syariah Manfaat. Pengumpulan data dilakukan melalui wawancara mendalam, observasi terlibat, dan dokumentasi di SMK Muhammadiyah 1 Cilacap dan enam tempat PKL yang terdiri dari 2 BPRS dan 4 BMT di Kabupaten Cilacap. Hasil yang diperoleh menunjukkan bahwa model uji kompetensi keahlian berbasis kerja siswa SMK dengan nama model UKKPBS, sangat layak dan efektif diterapkan pada SMK kompetensi keahlian perbankan Syariah.AbstractThis study aims develop a model for assessments in the area of sharia banking for Vocational High School (SMK) students. The proposed competency assessment model in this study refers to the combination of the learning process in the industry through apprenticeship (PKL) and assessments carried out in schools. This research uses a research and development method developed by Borg Gall and modified by Sukmadinata, which consists of preliminary, development, and testing stages. This research employed a research and development method developed by Borg Gall and modified by Nana Syaodih Sukmadinata, which consists of preliminary, development, and testing stages. This research was conducted at SMK Muhammadiyah 1 Cilacap and six locations of PKL, namely, Bank Perkreditan Rakyat Syariah (BPRS) Gunung Slamet, BPRS Suriyah, Baitul Mal Wa Tamwil (BMT) Muhammadiyah, BMT Mentari Umat, BMT BEST, and BMT Syariah Manfaat. Data collection was carried out through in-depth interviews, participatory observations, and documentation at SMK Muhammadiyah 1 Cilacap and six PKL places consisting of 2 BPRS and 4 BMT in Cilacap Regency. The results show that the discovery of work-based assessment models on vocational students with the name of the UKKPBS model, very feasible and effective to be applied applied to vocational competencies of sharia banking expertise

Development of Learning Devices of Basic Electronic Virtual Laboratory Based on PSPICE Software Muchlas Muchlas; Pramudita Budiastuti
Journal of Vocational Education Studies Vol. 3 No. 1 (2020)
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/joves.v3i1.2085

The availability of modules to support basic electronic practices based on virtual laboratories has not yet met the needs. The purpose of this development research is to produce basic electronic practice learning devices based on the PSPICE application program. The development procedure uses ADDIE (analysis, design, development, implementation, evaluation). ADDIE is used to direct the design process as specified. Product performance was tested using ongoing formative evaluation. The product feasibility test uses a comparative analysis of the results of the PSPICE experiment against the theory. The results show that all modules developed can display the same characteristics as their theoretical character. The results show that the modules have very good performance. Modules are suitable for use as a medium for basic electronic practice using PSPICE-based virtual laboratories. The products are in the form of electronic circuits with 31 schematic PSPICE formats. Product results to support basic electronic practices covering topics: capacitor filling and discharging, RC circuits, diode characteristics, wave forming circuits, rectifier circuits, voltage clamp, voltage circuits, transistor characteristics, and amplifier transistor.

Development of Basic Electrical Learning Video to Improve Student’s Competencies Eko Swi Damarwan; Pramudita Budiastuti; Adhy Kurnia Triatmaja
Journal of Vocational Education Studies Vol. 5 No. 2 (2022)
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/joves.v5i2.6997

In the digitalization era, the learning process has begun to use blended learning. Blended learning is carried out face-to-face directly or indirectly. Students are expected to be able to study independently. In basic electrical practice courses, students have difficulty learning independently. This study aims to develop learning videos to improve student competencies. The development model used is the ADDIE model. The stages of development carried out are Analyze, Design, Development, Implementation, and Evaluation. The feasibility test of the basic electrical learning video in terms of motivation is 90.29%, convenience is 88.50% and material is 86.75% The feasibility of basic electrical learning videos as learning media is included in the "very feasible" category. This learning media can be used to support the learning process of basic electrical practices.

Development and Measurement COVID-19 Reminder Hat with Ultrasonic Sensor HC-SR04 Barry Nur Setyanto; Filly Pravitasari; Pramudita Budiastuti; Fanani Arief Ghozali
IJEIS (Indonesian Journal of Electronics and Instrumentation Systems) Vol 12, No 2 (2022): Oktober
Publisher : IndoCEISS in colaboration with Universitas Gadjah Mada, Indonesia.

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22146/ijeis.78352

The development of ultrasonic sensor technology used for suitable equipment is widely carried out, such as distance sticks for the blind, floor cleaning robots, automatic garbage boxes, height measuring instruments, water volume detectors, automatic dispensers, automatic hand sanitisers, etc. In the study, the researchers developed a precision device based on an ultrasonic sensor called the COVID-19 reminder hat. The research design method is research and development, using the Borg and Gall approach. COVID-19 reminder Hat was developed using Arduino nano v3, battery, buzzer, and ultrasonic sensor HC-SR04. The product design was registered with Intellectual Property in the Industrial Design category with registration number A00202102408. The measurement distance of the ultrasonic sensor on flat objects shows an average error percentage of 2.64% from 10 cm to 300 cm with a range of 10 cm. Tests on irregular objects (humans) at an angle of zero degrees and 15 degrees showed an error at a distance of more than 200 cm and stable at a distance of 150 cm. So that 150 cm is the best distance to apply to the COVID-19 reminder hat. The development results show that the product is ready to be continued in the production and sales process.

PENGEMBANGAN TRAINER KIT PRINTED CIRCUIT BOARD (PCB) SOLDER SEBAGAI MEDIA PEMBELAJARAN PADA MATA KULIAH PRAKTIK RANGKAIAN LISTRIK Pramudita Budiastuti; Eko Swi Damarwan; Adhy Kurnia Triatmaja; Ranesti Damarsuri
Jurnal Edukasi Elektro Vol 6, No 2 (2022): Jurnal Edukasi Elektro, Volume 6, Nomor 2, 2022
Publisher : JPTE FT UNY

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.21831/jee.v6i2.51664

ABSTRACTBased on the results of observations and interviews with lecturers in the electrical circuit practice course, data was obtained, namely that there was no learning media in the form of a trainer kit which made it easier for students to be skilled in soldering and the need to increase student motivation in the learning process of electrical circuit practice. The stages of this research method are using the ADDIE approach (ADDIE Approach). The ADDIE approach includes Analyze, design, develop, implement, and evaluate. The results of the media validity test can conclude that the media aspect obtains a minimum value of 87.5% and a maximum value of 90%. The results of the material validity test can be concluded that the material aspects obtain a value of 88.40% for the suitability of the material and a value of 90.2% for the quality of learning. The results of the feasibility test from the user can conclude that the due diligence test from the user obtains a score of 89.80% in terms of motivation, 88.0% in terms of convenience, and 90.3% in terms of material. Based on the results of the validity test of the media, material and feasibility it can be concluded that the PCB Solder trainer kit is in the "very feasible" category.ABSTRAKBerdasarkan hasil observasi dan wawancara dengan dosen pengampu mata kuliah praktik rangkaian listrik didapatkan data yaitu belum adanya media pembelajaran berbentuk trainer kit yang memudahkan peserta didik untuk terampil dalam soldering dan perlunya meningkatkan motivasi mahasiswa dalam proses pembelajaran praktik rangkaian listrik. Tahapan metode penelitian ini yaitu menggunakan pendekatan ADDIE (ADDIE Approach). Pendekatan ADDIE meliputi: Analyse (menganalisis), design (merancang), develop (mengembangkan), implementation (menerapkan), dan evaluation (mengevaluasi). Hasil uji validitas media dapat simpulkan bahwa aspek media memperoleh nilai minimal sebesar 87,5% dan nilai maksimal sebesar 90%. Hasil uji validitas materi dapat simpulkan bahwa aspek materi memperoleh nilai sebesar 88,40% untuk kesesuaian materi dan nilai sebesar 90,2% untuk kualitas pembelajaran. Hasil uji kelayakan dari pengguna dapat simpulkan uji kelayakan dari pengguna memperoleh nilai sebesar 89,80% ditinjau dari motivasi, 88,0% ditinjau dari kemudahan, dan 90,3% ditinjau dari materi. Berdasarkan hasil uji validitas media, materi dan kelayakan dapat disimpulkan bahwa trainer kit PCB Solder termasuk kategori “sangat layak”.

Title

Found 13 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 13 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 13 Documents
Search