Claim Missing Document
Check
Articles

Found 9 Documents
Search

Konsep Pengatur Lalu-Lintas Sinkron Adaptif Kepadatan Untuk Solusi Minimalisasi Durasi Waktu Tunggu Kendaraan Kurniawan, Freddy; Al Hasibi, Rahmat Adiprasetya
Jurnal Semesta Teknika Vol 10, No 2 (2007): NOVEMBER 2007
Publisher : Jurnal Semesta Teknika

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

To minimize travel time in a highway, some traffic controllers must be synchronized to the other. Intersection controllers of an area are interconnected with a communication network through which synchronization information is exchanged. The main purpose of synchronized traffic control system is to minimize the waiting time of almost all vehicles in each traffic light. Green and duration time of all traffic control system are derived from some parameters such as adjacent green time, vehicle speed and acceleration, and estimation of travel time.  
Analisis Ketepatan Penghitung Frekuensi dengan Metode Pencacahan Berbasis Mikrokontroler Kurniawan, Freddy; Basukesti, Agus
Semesta Teknika Vol 11, No 2 (2008): NOVEMBER 2008
Publisher : Semesta Teknika

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

A frequency counter is an electronic instrument, or component of one, that is used for measuring frequency. Frequency counters usually measure the number of oscillations or pulse per second in a repetitive electronic signal. A digital-signal frequency counter, can measure the number of positive-going-transition or the number of negative-going-transition of signal in a set of period time. This microcontroller-based frequency counter work by using a counter, which accumulates the number of negative-going-transitions occurring within two periods for 16-bit microcontroller-timer overflow. After the period, the value in the counter is divided by the period and transferred to a display. This frequency counter can measure frequency from 100 Hz to 1 MHz. The upper limit of frequency can be extended up to 256 MHz by adding a frequency divider. The analysis of the accuracy of measuring presented in this article can support to determine the number of digit to display.  
STUDI PERUBAHAN PROFIL EKONOMI PENGHUNI TERKAIT LOKASI RUMAH SUSUN STUDI KASUS: BANDAR KEMAYORAN, KEBAGUSAN CITY DAN SENTRA TIMUR RESIDENCE Kurniawan, Freddy; Tresani, Nurahma; Herlambang, Suryono
Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan Vol 2, No 2 (2018): Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan
Publisher : Universitas Tarumanagara

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24912/jmstkik.v2i2.1606

Abstract

Flats as a vertical housing is one of many housing options in urban areas that are considered a strategy toovercome the problem of people’s limited purchasing power for regular houses due to high land prices in urbanareas. Various towers scattered around Jakarta and surrounding areas currently each have their own advantagesor exclusive factors for residents such as the close proximity to the city center or workplace, close proximity tosupporting facilities and the diversity of the environment around the towers become benchmarks in determining thelocation for their towers. Therefore, the occupancy of a flat, in this case the research samples taken are BandarKemayoran, Kebagusan City and Sentra Timur Residence, can be seen using the theory of location for housingselection and the impact of changes that occur in terms of economic profiles that change before and after living inthe flats. The research method used is 2 sample test method to determine the condition of residents before and aftermoving to flats. The result of this study indicates that, if each location has its own role in the changes in economicprofiles that occur, such as how significant the change is in terms of occupational fields and occupants' income,where each location shows different percentage in the change that occurs. The purpose of this study is to show therelationship between the resettlement of residents to flats and changes in economic profile (employment andincome).Keywords: flat, location of flats, changes in occupant economic profile.Rumah susun (rusun) sebagai perumahan vertikal adalah salah satu pilihan perumahan di daerah perkotaan yang dianggap strategi untuk mengatasi masalah keterbatasan kemampuan daya beli masyarakat untuk rumah tapak karena tingginya harga tanah di perkotaan. Berbagai rusun yang tersebar di Jakarta dan sekitarnya saat ini masing-masing memiliki daya tarik atau faktor-faktor tersendiri untuk para penghuni baik dari dekat dengan pusat kota atau tempat kerja, kedekatan dengan fasilitas pendukung dan keberagaman lingkungan sekitar rusun menjadi tolak ukur penghuni dalam menentukan lokasi rusun mereka. Sehingga terjadinya penghunian pada suatu rusun dalam hal ini sampel penelitian yang diambil adalah Bandar Kemayoran, Kebagusan City dan Sentra Timur Residence dapat dilihat dengan teori lokasi untuk pemilihan tempat tinggal serta dampak perubahan yang terjadi dari segi profil ekonomi yang berubah pada saat sebelum dan sesudah tinggal di rusun. Metode penelitian yang digunakan adalah metode 2 sampel tes untuk mengetahui keadaan penghuni sebelum dan sesudah pindah ke rumah susun. Hasil penelitian ini menunjukkan jika masing-masing lokasi memiliki peranan tersendiri dalam perubahan profil ekonomi penghuni yang terjadi, seperti seberapa besar perubahan dari segi bidang pekerjaan dan penghasilan penghuni yang setiap lokasi mempunyai perbedaan  persentase perubahan yang terjadi. Tujuan dari penelitian ini adalah untuk menunjukkan adanya relasi antara perpindahan tempat tinggal penghuni menuju rumah susun terhadap perubahan profil ekonomi (bidang pekerjaan dan penghasilan). Kata kunci: rumah susun, lokasi rumah susun, perubahan profil ekonomi penghuni
Pengaruh Penggunaan Perturb & Observe pada MPPT terhadap Daya Keluaran Sel Surya Dalimunthe, Ernando Rizki; Kurniawan, Freddy; Lasmadi, Lasmadi
AVITEC Vol 1, No 1 (2019): Agustus 2019
Publisher : Sekolah Tinggi Teknologi Adisutjipto

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (746.328 KB) | DOI: 10.28989/avitec.v1i1.483

Abstract

Optimizing the solar cell output power requires a tracker. The tracker which produce a maximum output power is called a maximum power point tracking (MPPT). In this research, each component in MPPT is modeled into Simulink. By using a perturb and observe (P & O) algorithms, this simulation is designed to optimize the solar cell output power. The output of the algorithm is a duty cycle. This parameter is fed into a buck-boost converter to convert the solar cell output voltage to the output voltage. The simulation results show that MPPT can increase the output power up to 37.82% dispite of the sun irradiation, temperature and load changes.
POLA - POLA PEMANFAATAN TROTOAR OLEH PEDAGANG KAKI LIMA DI JALAN MANGGA BESAR – JAKARTA Kurniawan, Freddy
Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan Vol 3, No 1 (2019): Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan
Publisher : Universitas Tarumanagara

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24912/jmstkik.v3i1.2842

Abstract

Penelitian ini bertujuan untuk mengetahui pola-pola pedagang kaki lima di Jalan Mangga Besar. Jalan Mangga Besar yang identik dengan hiburan malam dan wisata kulinernya membuat pedagang kaki lima betah untuk berdagang di lokasi tersebut. Pedagang kaki lima tersebut memiliki pola-pola dalam berdagang. Terdapat pedagang yang berdagang secara menetap dan juga setengah menetap. Secara legalitas, terdapat pedagang kaki lima yang non binaan dan juga binaan. Keberadaan pedagang kaki lima binaan ini diatur waktu dan lokasi berdagangnya oleh pemerintah. Pedagang kaki lima non binaan biasanya hanya ijin atau sewa secara tidak sah kepada juru parkir sekitar. Peneliti langsung datang ke lapangan untuk melihat situasi lapangan dan melakukan sesi wawancara kepada beberapa pedagang kaki lima di Jalan Mangga Besar dan pihak kelurahan setempat. Pedagang kaki lima non binaan ini memanfaatkan trotoar dan bahu jalan untuk lokasi berdagang mereka, dan juga menimbulkan kemacetan. Sehingga dibutuhkan desain penempatan pedagang kaki lima non binaan. Sehingga keberadaan pedagang kaki lima non binaan di Jalan Mangga Besar tidak mengganggu akses pejalan kaki yang ingin menggunakan trotoar. This study aims to determine the patterns of street vendors on Jalan Mangga Besar. Jalan Mangga Besar, which is synonymous with nightlife and culinary tourism, makes street vendors feel comfortable to trade at this location. These street vendors have patterns in trading. There are traders who trade permanently and also half settled. Legally, there are non-fostered and non-assisted street vendors. The existence of these fostered street vendors is regulated by the government at the time and location of trading. Non-trained street vendors are usually only licensed or illegally rented to the parking attendants around. Researchers immediately came to the field to see the field situation and conducted interview sessions with several street vendors on Jalan Mangga Besar and the local kelurahans. These non-assisted street vendors utilize sidewalks and shoulders for their trading locations, and also cause congestion. So it takes the design of placement of non-fostered street vendors. So that the presence of non-fostered street vendors on Jalan Mangga Besar does not interfere with access of pedestrians who want to use the sidewalk.
PEMODELAN PENGOREKSI FAKTOR DAYA OTOMATIS UNTUK BEBAN LISTRIK BERVARIASI Al Hasibi, Rahmat Adiprasetya; Kurniawan, Freddy
Jurnal Teknologi Vol 4 No 2 (2011): Jurnal Teknologi
Publisher : Jurnal Teknologi, Fakultas Teknologi Industri, Institut Sains & Teknologi AKPRIND Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Faktor daya adalah salah satu masalah dalam peningkatan kualitas tenaga listrik. Dalam banyak kasus, faktor daya yang rendah menyebabkan pembeorosan energi listrik. Dalam sektor komersial dan industri besar, bank kapasitor biasanya digunakan dalam suatu sistem kapasitor terpusat dalam sebuah ruang untuk keperluan koreksi faktor daya. Namum, perubahan daya listrik yang dikonsumsi oleh peralatan listrik yang dioperasikan setiap saat memerlukan perubahan dalam kapasitas kapasitor yang harus mengimbangi sifat induktif dari peralatan listrik yang dioperasikan. Sebuah sistem nilai yang dapat memberikan nilai kapasitas kapastiro yang sesuai untuk memperbaiki faktor daya dibutuhkan pada sebuas sistem dengan perubahan dinamis yang terdapat pada beban listrik.
PROTOTIPE SISTEM PENGATUR ISYARAT LALU-LINTAS TERKOORDINASI UNTUK SIMPANG EMPAT GONDOMANAN DAN BINTARAN Kurniawan, Freddy; Honggowibowo, Anton Setiawan
Jurnal Teknologi Vol 7 No 1 (2014): Jurnal Teknologi
Publisher : Jurnal Teknologi, Fakultas Teknologi Industri, Institut Sains & Teknologi AKPRIND Yogyakarta

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Salah satu kelemahan alat pengatur isyarat lalu-lintas (APILL) di persimpangan Gondomanan dan Bintaran adalah tidak adanya koordinasi di antara keduanya. Hal ini telah mengakibatkan terjadinya antrian panjang kendaraan dan kemacetan lalu-lintas. Salah satu solusinya adalah digunakannya sistem pengatur isyarat lalu-lintas terkoordinasi. Tujuan metode ini adalah agar sebagian besar kendaraan di jalur utama dapat melewati kedua persimpangan tersebut tanpa mendapat isyarat merah. Prototipe sistem pengatur isyarat lalu-lintas terkoordinasi ini terdiri dari dua APILL, yaitu APILL master dan slave. APILL master mengatur lalu-lintas sesuai jadwal, sedangkan APILL slave mengatur lalu-lintas sesuai jadwal dan mengikuti pewaktuan dari master. APILL slave dapat menambah atau mengurangi waktu hijau beberapa fase agar pewaktuan kedua APILL menjadi sinkron. Program pengatur isyarat lalu-lintas terkoordinasi ini dijalankan di mikrokontroler AVR ATmega128A. Program hanya menggunakan tidak lebih dari 10 % sumber daya prosesor, sehingga dapat dikembangkan dengan leluasa tanpa mengganti prosesor yang digunakan. Kata kunci: , APILL master, APILL slave
Estimasi sudut orientasi rigid body dengan menggunakan sensor IMU (Inertial Measurement Unit) dan Magnetometer Sandi, Briyan Yoga; Kurniawan, Freddy; Lasmadi, Lasmadi
SENATIK STT Adisutjipto Vol 6 (2020): Keselamatan Penerbangan di masa Pandemi Covid-19 [ISBN 978-602-52742-2-0]
Publisher : Institut Teknologi Dirgantara Adisutjipto

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.28989/senatik.v6i0.425

Abstract

One of the instruments that can be used today for navigation is the IMU (Inertial Measurement Unit) sensor which consists of an accelerometer sensor, gyroscope, and an additional magnetometer. The three sensors are useful for determining the orientation angle. However, the presence of high enough noise in the three-output data can cause the orientation angle to be inaccurate. This study aims to determine the roll, pitch and yaw orientation more accurately using a Kalman filter. This filter is used because it has a lightweight computation and can reduce noise significantly. The results of this study show that the orientation angle calculated using the Kalman filter is close to the actual orientation angle with an accuracy of 99.2% for roll, 99.5% for pitch, and 98.6% for yaw.
IMPLEMENTASI MIKROKONTROLER SEBAGAI PENCACAH FREKUENSI BERBASIS PENGUKURAN PERIODE ISYARAT MASUKAN Freddy Kurniawan
TELKOMNIKA (Telecommunication Computing Electronics and Control) Vol 7, No 1: April 2009
Publisher : Universitas Ahmad Dahlan

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.12928/telkomnika.v7i1.577

Abstract

One of the main components from frequency counter is a processor. This processor must have ability to conduct counting and arithmetical calculation. To get competitive price, in this research a microcontroller is applied as a processor. This paper presents design of frequency counter based on microcontroller AT89S51 which has two independent timers. The input frequency counter is conducted by using facilities inside microcontroller e.g. T0 and external interruption. Counter method used in this research is by measuring input signal period. This method is proven effectively to count frequency especially low frequency. As the result, the frequency counter has successfully measured frequency from 0.1 until 10 kHz with maximum error 1%. This device is possible to be the next frequency counter with competitive price.