Garuda - Garba Rujukan Digital

p-Index From 2019 - 2024

1.152

P-Index

This Author published in this journals

All Journal Journal of Physics: Theories and Applications INDONESIAN JOURNAL OF APPLIED PHYSICS Jurnal Kewirausahaan dan Bisnis Jurnal Matematika dan Sains (JMS)

Agus Supriyanto

Universitas Sebelas Maret

Author-ID : 3694661

Astronomy Biochemistry, Genetics & Molecular Biology Chemical Engineering, Chemistry & Bioengineering Chemistry Education Energy Materials Science & Nanotechnology Mathematics Physics Social Sciences

Published : 8 Documents Claim Missing Document

Claim Missing Document

Articles

Optical properties of dye DN-F05 as a good sensitizer Diani Galih Saputri; Agus Supriyanto; Mohd Khairul Ahmad; Nadiyah El-Haq Diyanahesa; Febrina Ramadhani
Journal of Physics: Theories and Applications Vol 3, No 2 (2019): Journal of Physics: Theories and Applications
Publisher : Universitas Sebelas Maret

This research studied the effect of adding synthetic dye DN-F05 (red dye) to electrical and optical properties. Dye-Sensitized Solar Cell (DSSC) sandwich components are consist of FTO/TiO2-Dye-elektrolit-Platina/FTO. In this study, the working electrodes were made by Titanium dioxide (TiO2) which was deposited on FTO glass and then annealed at 450oC for 30 minutes. The dye concentration DN-F05 was made with a mass of 0.001 gr, then will be stirred for 2 hours into 5 ml of ethanol at a temperature of 40oC. In this study the spin coating method is used with a rotational speed of 1000 rpm for 20 seconds. Characterization of optical properties was carried out using a UV-VIS spectrophotometer to determine the absorbance curve of dye and to get Gap energy. The peak absorbance value was obtained at wavelengths between 400-700 nm. This proved that the addition of DN-F05 dye concentration has a major influence on the optical properties.

Performance of natural chlorophyll Amaranthus and Carica Papaya dye on TiO2 coating in the making of dye sensitized solar cell (DSSC) through the spin coating method Fernince Ina Pote; Agus Supriyanto; Fahru Nurosyid; Deni Kurniawan
Journal of Physics: Theories and Applications Vol 3, No 2 (2019): Journal of Physics: Theories and Applications
Publisher : Universitas Sebelas Maret

The natural dye extracted from Amaranthus dye and Carica Papaya dye which has been prepared in ethanol solution as a sensitizer on DSSC. The Spin coating method is used so that the deposition on TiO2 gets a homogeneous thin layer on the active area of the FTO substrate. The dye solution was tested for characterization using the Elkahfi I-V Meter and UV-Vis 1601 while the FTO structure substrate that had been prepared as a sandwich was tested using Keithley I-V type 2602A. The result of absorbance of dye is at a wavelength of 400 nm - 800 nm and there is also a shift in wavelength and peak absorption of the dye. The greatest efficiency was obtained from chlorophyll amaranthus which is 0.730% while chlorophyll Carica papaya obtained an efficiency of 0.432%. In the combination of Amaranthus dye and Carica papaya dye, the efficiency was 0.526%. High efficiency on TiO2 electrodes shows good performance on Dye-sensitized solar cells.

Optical properties of dye DN-F01 as sensitizer Febrina Ramadhani; Agus Supriyanto; Mohd Khairul Bin Ahmad; Nadiyah El-Haq Diyanahesa; Diani Galih Saputri
Journal of Physics: Theories and Applications Vol 3, No 1 (2019): Journal of Physics: Theories and Applications
Publisher : Universitas Sebelas Maret

Dye-Sensitized Solar Cell (DSSC) is a solar cell made from organic material that works with an electrochemical photo system to convert solar energy into electrical energy. The components of DSSC consist of transparent conductive substrates, dyes, semiconductors, electrolytes and counter electrodes. Dye as a sensitizer is has an important role in DSSC performance improvement. This study aims to obtain optical characterization such as absorbance spectrum and transmittance from DSSC using dye DN-F01 with concentration 2x10-3 M. Optical characterization has been tested using a UV-VIS Spectrophotometer Shimadzu UV-1800. The test results show that the absorbance spectrum of the dye is at a wavelength of 400-500 nm. Band gap energy of DN-F01 has obtained from its absorbance and transmittance value is about 2,46 eV.

Hubungan Sifat Optik terhadap Performa Kinerja Sel Surya DSSC Transparan Berbahan Dye DN-F01 sebagai Sensitizer Agus Supriyanto; Ari Handono Ramelan; Mohd Khairul Bin Ahmad; Febrina Ramadhani; Diani Galih Saputri
INDONESIAN JOURNAL OF APPLIED PHYSICS Vol 10, No 2 (2020): IJAP Volume 10 ISSUE 02 YEAR 2020
Publisher : Department of Physics, Sebelas Maret University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.13057/ijap.v10i2.46261

Dye sensitized solar cell (DSSC) is the third generation of solar cells that currently developing by researchers to get the best performance. The selection of dye as a component of DSSC has a big influence in the light absorption process. In this study, DN-F01 organic dye was used as a sensitizer with various concentrations. The optical properties test was carried out on the DN-F01 dye solution by UV-Vis spectrophotometer (Shimadzu UV-1800) and the DSSC fabricated performance was tested by portable solar simulator (ORIEL Sol1A). From the results, the DN-F01 absorbance has ability to absorb light in the 300-500 nm wavelength range. The greatest efficiency value in this research is 2.44% obtained from the sample was immersed with the largest concentration of dye DN-F01 which has the smallest band gap energy of 2.38 eV.

Pengaruh Ketebalan Elektroda Kerja TiO2 Transparan terhadap Kinerja Dye Sensitized Solar Cell (DSSC) sebagai Aplikasi Solar Window Nadya Aruma Dewi; Fahru Nurosyid; Agus Supriyanto; Risa Suryana
INDONESIAN JOURNAL OF APPLIED PHYSICS Vol 6, No 02 (2016): IJAP Volume 06 Issue 02 Year 2016
Publisher : Department of Physics, Sebelas Maret University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.13057/ijap.v6i02.1362

Senditized Dye Solar Cells (DSSC) consist of photoelectrode, dye, electrolyte and counter electrode which is one of the photochemical electric cells. In this article will discuss the influence of the thickness of the electrode on the electrical properties. Electrodes made by screen printing method. Screen by type T-49. TiO2 deposited on the FTO variation of the number of layers to obtain a thickness of 1, 2, 3 and 4. DSSC tested thickness by Screen Electron Microscopy (SEM), absorbance test by UV Visible Lambda 25 and characterization of current and voltage test by Keithley Measurenment 2602A. The test results showed the thickness of the TiO2 electrode thickness (1.5 ± 0.2) μm, (2.9 ± 0.5) μm, (3.5 ± 0.6) μm, and (4.5 ± 0.8 ) μm. Based on the test results absorbance maximum value contained in thickness (4.5 ± 0.8) μm having a dye adsorbed at most and have the highest efficiency 2.41%.

APLIKASI PLTS ON GRID PADA USAHA PEMBESARAN LELE Fahru Nurosyid; Agus Supriyanto; Risa Suryana; Yofentina Iriani
Jurnal Kewirausahaan dan Bisnis Vol 23, No 11 (2018): June
Publisher : Universitas Sebelas Maret

Application of on-grid PLTS on the effort of catfish enlargement aims to reduce the cost for the fulfillment of electrical energy, increase knowledge and train the skills to assemble PLTS on grid. Farmers catfish use electrical energy to power the water pump. PLTS on grid enables saving on electricity costs. The use of on-grid PLTS does not require an electric storage battery. The overproduction of electricity from PLTS allows it to be sold to PLN. If there is a shortage of electricity, then electricity is purchased from PLN. Public knowledge about PLTS can be introduced in theory and practice of PLTS installation scale 2000 WP (watt peak). The use of 2000 WP can produce 9.2 KWH / day in sunny conditions.e

Structural Investigation and Properties Of Tio2 Thin Film Prepared by Sol-Gel Spin Coating Diani Galih Saputri; Mohd Khairul Bin Ahmad; Agus Supriyanto; Achmad Nasyori; Salisu I Kunya; Nurul Amiera Shahida Maarof; Siti Nurhaziqah Abd Majid; Anis Zafirah Mohd Ismail; Shazleen Ahmad Ramli
INDONESIAN JOURNAL OF APPLIED PHYSICS Vol 12, No 2 (2022): IJAP Volume 12 ISSUE 02 YEAR 2022
Publisher : Department of Physics, Sebelas Maret University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.13057/ijap.v12i2.59567

We report the structural properties of TiO2 (Titanium dioxide) thin films grown using sol-gel spin coating method for temperature treatment (with temperature 50o C and without temperature) The difference in temperature is carried out to determine changes in the surface of the sample by using heating or not. Ideally, the thickness of the TiO2 layer ranges from 10-15 μm, therefore in this study it was carried out in 5 layers. Field Emission Scanning Electron Microscopy (FESEM) consist of surface morphology, Cross-section sample, and EDX images, respectively, providing the structure of the surface. The result confirm that temperature treatment can damage the surface coating, this is proven by the shape of the crack in the coating.

EFEK PENYISIPAN Cu KE DALAM DYE BERAS HITAM DENGAN LUASAN 0,5 cm2 PADA DYE SENSITIZED SOLAR CELL (DSSC) Ulfa Mahfudli Fadli; Ardimas; Agus Supriyanto; Cari; Ashari Bayu Prasada
Jurnal Matematika dan Sains (JMS) Vol. 1 No. 1 (2021): Jurnal Matematika dan Sains (JMS)
Publisher : Fakultas Matematika dan Ilmu Pengetahuan Alam

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.55273/jms.v1i1.80

Thanks to the addition of copper (Cu) metal into black rice (Oryza sativa L. indica) dye as an active material, It has been successfully developed Dye-Sensitized Solar Cells (DSSC). The structure of the sample as a sandwich consisting of the working electrode (TiO2), dye, electrode of platinum (Pt) and the electrolyte sandwiched between two electrodes. Extraction process of black rice Dye was stirred for 30 minutes, then mixed with copper metal (Cu) and be waited for 24 hours. Cu metal was obtained by stirring Copper Sulfate Pentahydrate for 2 hours. The Current and voltage (I-V) of the sample was characterized by using Keithley 2602A. The measurement results showed that the inserting Cu metal of 2 g (0.36 M) was reached the highest efficiency of 0.0217%.

Co-Authors Achmad Nasyori Anis Zafirah Mohd Ismail Ardimas Ari Handono Ramelan Ashari Bayu Prasada Cari Deni Kurniawan Diani Galih Saputri Diani Galih Saputri Fahru Nurosyid Febrina Ramadhani Fernince Ina Pote Mohd Khairul Ahmad Mohd Khairul Bin Ahmad Mohd Khairul Bin Ahmad Nadiyah El-Haq Diyanahesa Nadya Aruma Dewi Nurul Amiera Shahida Maarof Risa Suryana Salisu I Kunya Shazleen Ahmad Ramli Siti Nurhaziqah Abd Majid Ulfa Mahfudli Fadli Yofentina Iriani

Title

Found 8 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 8 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 8 Documents
Search