cover
Contact Name
Rudy Kurniawan
Contact Email
rudy14k@gmail.com
Phone
+6285267099660
Journal Mail Official
rudy14k@gmail.com
Editorial Address
Kampus Terpadu Balunijuk, Kecamatan Merawang, Kabupaten Bangka, Provinsi Kepulauan Bangka Belitung
Location
Kab. bangka,
Kepulauan bangka belitung
INDONESIA
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering)
ISSN : 23555068     EISSN : 26224852     DOI : https://doi.org/10.33019/jurnalecotipe
This scientific journal is called Jurnal Ecotipe (Electronic, Control, Telcommunication, Information, and Power Engineering) with clusters of science in the field of Electrical Engineering covering the field of Electronics, Control, Telecommunications, Information/Informatics, and Power Electricity. The schedule of scientific journal publication is planned 2 times / volume in a year, ie April and October. The author can come from institutions outside the Department or from within the Department of Electrical Engineering University of Bangka Belitung. Aim and Scope : Electronics, Electronic Materials, Microelectronic System, Control System Engineering, Instrumentation and Control Engineering, Robotics, Telecommunication, Modulation and Signal Processing, Antenna and Wave Propagation, Information Technology, Information Theory and Coding, Computer Engineering and Informatics, Electrical and Power Engineering, Transmission and Distribution, Renewable Energy.
Articles 172 Documents
Rain Process Education as Interactive Multimedia in Early Childhood using the Multimedia Development Life Cycle (MDLC) Yohani Setiya Rafika Nur; Dasril Aldo; Annisaa Utami
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 10 No 1 (2023): Jurnal Ecotipe, April 2023
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/jurnalecotipe.v10i1.3852

Abstract

Learning media has a positive impact because it can be fun, increase students' interest in learning, and be interactive. The learning method in Early Childhood Education (PAUD) Ratnanigsih uses a Sentra approach and the environment by playing sambal learning to develop the intelligence of a potential child. The facts in PAUD Ratnaningsih found obstacles in the teaching and learning process. These obstacles occur due to the lack of visualization or media for teachers, and the absence of variations in learning can cause saturation in children. Users in this study are early childhood teachers in PAUD Ratnaningsih. Based on these problems, a learning press is needed for teacher and child relations educated at PAUD Ratnaningsih. The learning media design method in this study uses the Multimedia Development Life Cycle (MDLC) approach and learning media using Macromedia Flash 8. The results of this study are in the form of storyboard design, visualization of interface design, implementation of learning media, and testing with Blackbox Testing. Based on the conclusions of this study shows that all components and features of learning media function properly and can be used by teachers in the learning process "Universe" with the sub-theme "Rain".
Analysis of The Utilization of Tofu Liquid Waste as a Biogas Electricity Power Plant (Case Study of BK Tofu Industry at Payakumbuh City West Sumatra) Galuh Putra Rajabya; Novi Gusnita
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 10 No 1 (2023): Jurnal Ecotipe, April 2023
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/jurnalecotipe.v10i1.3855

Abstract

The increase in population from year to year causes an increase in the need for food such as Tofu. This also has an impact on the number of tofu industries in Indonesia. The tofu industry is a food industry that is in great demand by the public, raw materials are easy to find, and processing is easy. Nevertheless, it arises that the environmental problems posed by the tofu industry are waste generated from the liquid tofu waste manufacturing process. When discharged into the environment, it can cause a foul odour and pollute the environment. The utilization of tofu liquid waste into electrical resources is one of the steps that can be developed in reducing pollution and increasing electrification. Being the first step, it is necessary to study the use of biomass as a source of electricity, which includes studying the potential of resources. This study aims to determine the potential value of tofu liquid waste and electrical energy for PLTBG fuel as an effort to apply clean technology. For the method in this study using anaerobic fermentation with SuperPro Designer simulation. As a result of this study, tofu liquid waste produces methane gas (CH4) of 141.97 m3 per day and total electrical energy of 129.03 kWh. It can be concluded from this study, tofu liquid waste can be used as biogas for generator set fuel with an output power of 12,000 Watts which meets industrial electricity needs for 11.73 hours.
Design and Build a Website-Based Landslide Early Warning System Fajar Mahardika; Muhammad Ghofinda Prasetia; Puji Cahniya Sari; M. Azwan; Inayatul Inayah
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 10 No 1 (2023): Jurnal Ecotipe, April 2023
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/jurnalecotipe.v10i1.3894

Abstract

K-Means and K-Medoids Algorithm Comparison for Clustering Forest Fire Location in Indonesia Ichwanul Muslim Karo Karo; Sri Dewi; Mardiana Mardiana; Fanny Ramadhani; Putri Harliana
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 10 No 1 (2023): Jurnal Ecotipe, April 2023
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/jurnalecotipe.v10i1.3896

Abstract

Forest fires are the most common cause of deforestation in Indonesia. This condition has a negative impact on the survival of living things. Of course, this has received special attention from various parties. One effort that can be made for prevention is to group these points into areas with the potential for fire using the clustering method. In this research, a comparative study of the clustering algorithm between K-Means and K-Medoids was conducted on hotspot location data obtained from Global Forest Watch (GFW). Besides that, important variables that affect the clustering process are also analyzed in terms of feature importance. There are nine important variables used in the clustering process, of which the Acq_time variable is the most important. The cluster quality of both algorithms is evaluated using the silhouette coefficient (SC). Both algorithms are capable of producing strong clusters. The best number of clusters is six clusters. The K-medoids algorithm is better at grouping data than K-means.
Pengembangan Sistem Pemantauan Suhu dan Kelembaban Relatif Berbasis IoT untuk Rumah Budidaya Jamur Laurentius Kevin Hendinata; Ahmad Ilham Rokhul Fikri
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 10 No 1 (2023): Jurnal Ecotipe, April 2023
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/jurnalecotipe.v10i1.3919

Abstract

On the Spectral and Energy Efficiency Analysis of Statistical Clustered-Based MIMO Channel Uri Arta Ramadhani; Purwono Prasetyawan
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 10 No 1 (2023): Jurnal Ecotipe, April 2023
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/jurnalecotipe.v10i1.3924

Abstract

The Multiple-Input Multiple-Output technology played as the key role in the accomplishment of user high data rate. In the evolution of cellular technology to future wireless communication and beyond, the utilization of millimeter wave has been projected to deliver a better performance in terms of capacity and latency. However, the development of this technology is limited by the system power consumption. In this paper, we study the performance of cellular system using multiple antennas by evaluating the spectral efficiency, throughput, and energy efficiency. The measurements are conducted using a clustered channel model in several different scenarios. The simulation result shows that the performance of the system in UMi type of environment scenario outperforms other scenarios. Furthermore, this work also evaluate the relationship of the spectral and energy efficiency in varying related parameters, including number of antennas and power of the transmitter.
Direct Torque Control (DTC) Design With Fuzzy Sugeno-Proportional Derivative for 3-Phase Induction Motor Speed Control Ahmad Ahmad Faizal; Agustiawan Agus; Nanda Putri Miefthawati; Mulyono Mulyono; Rudy Kurniawan; Elfira Safitri; Corry Corazon Marzuki; Rahmadeni Rahmadeni
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 10 No 1 (2023): Jurnal Ecotipe, April 2023
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/jurnalecotipe.v10i1.3925

Abstract

In general, in the industrial world, induction motors are more widely used than direct current motors, due to the characteristics of induction motors that are sturdy, reliable, easy to maintain, and relatively inexpensive. The phenomenon of changing rotational speed when the load changes results in regulation of the speed of the induction motor, which risks slow response time, there is overshoot which should still be minimized, and there are disturbances caused by external environmental factors, so that a controller is needed that is able to work effectively to optimize performance. 3 phase induction motor. The purpose of this study is to design a sugeno-PD fuzzy DTC controller, where the DTC provides a fast and strong response mounted on an AC motor. Fuzzy Sugeno provides a short calculation time and its reasoning includes wide enough data and PD to speed up the response time results. So that the proposed method produces an induction motor rotating speed according to the given setpoint of 100 rad/s with a settling time of 0.45 seconds, a rise time of 0.2 seconds and no steady state error. From the state of the plan output response before being given the controller there is a steady state error of 5 rad/s, a maximum overshoot of 5.4111%, a settling time of 0.1554 seconds and a rise time of 0.1554 seconds
The Design of Solar Cell-Based Street Lighting for School Area Azriyenni Azhari Zakri; Muhammad Fauzan; Wahri Sunanda; Rudy Kurniawan
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 10 No 1 (2023): Jurnal Ecotipe, April 2023
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/jurnalecotipe.v10i1.3964

Abstract

Currently, public street lighting using Solar-based Public Street Lighting has been widely used. Solar-based Public Street Lighting is an off-grid Solar Power Plant application for street lighting. This study aims to use Solar-based Public Street Lighting which has been designed for Inayah Islamic School according to the geographical features of the school. To design this Solar-based Public Street Lighting by considering the economic aspect. From the data obtained directly at the location, the road width is 4.5 meters and the total length is 330 meters. Road size is used to determine the need for lighting quality according to the Indonesian National Standard of 7391:2008. This Solar-based Public Street Lighting has been designed with a pole height of 5 meters and a 1.5-meter pole arm using a 20 Watt 2-in-1 LED lamp and a solar cell capacity of 50 Wp per pole. From the results of the design analysis, the component specifications used in the design have met the requirements according to SNI of 7391:2008, and the required poles for Solar-based Public Street Lighting are 22 points for the Inayah Islamic School Complex area
Stadium Coverage Using Directional Antennas for High Density Access Points Based on Narrow HPBW Hasdi Radiles; Sutoyo Sutoyo; Dio Alam Pratama; Ahmad Faizal
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 10 No 2 (2023): List of the Accepted Article for Future Issues
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/jurnalecotipe.v10i2.4119

Abstract

The existence of a Wi-Fi network in the stadium is an important issue because of the many requests for communication access from spectators. Implementation of HD-AP Wi-Fi using directional antennas is one solution to avoid severe interference. This study simulates the coverage of the AP installed on the roof of the tribune station. The simulator is designed using HPBW Elevations 200, 400 and 600. Testing also considers the use of the appropriate transmit power, to obtain the appropriate HPBW combination to avoid interference. The analysis is carried out by comparing the reception of the strongest signal with reception at the sector border. The results of the study show that Antenna directional with HPBW Elevation 400 is more effective in serving users in three service sectors.
Optimization of 4G LTE Network with Automatic Cell Planning and Carrier Aggregation Methods Sutoyo Sutoyo; Teddy Purnamirza; Mulyono Mulyono; Ahmad Faizal
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 11 No 1 (2024): Jurnal Ecotipe, April 2024
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/jurnalecotipe.v11i1.4143

Abstract

The implementation of 4G LTE in Indonesia still faces numerous challenges, particularly in terms of coverage areas that are less than optimal, causing many areas to be classified as bad spots. One of them is Koto Baru Payobasung area, Payakumbuh. Network optimization is one method for overcoming this problem. In this study, we will use optimization techniques such as Automatic Cell Planning (ACP) and Carrier Aggregation (CA) with RSRP, SINR, and Throughput parameters. Through existing simulations, the results of the initial research revealed that two of the three parameters, namely RSRP and Throughput, were classified as very bad conditions. Based on the results of optimization using the ACP technique, it was discovered that there was an increase in the RSRP value of = -103 dBm, SINR of = 2 dB, and Throughput = 15 mbps. The RSRP value for the CA technique is -90 dBm, the SINR is 7 dB, and the throughput is 50 mbps. Because of the value of the optimization parameter results, the CA technique is more effective than the ACP technique in these two optimization techniques