cover
Contact Name
Rudy Kurniawan
Contact Email
rudy14k@gmail.com
Phone
+6285267099660
Journal Mail Official
rudy14k@gmail.com
Editorial Address
Kampus Terpadu Balunijuk, Kecamatan Merawang, Kabupaten Bangka, Provinsi Kepulauan Bangka Belitung
Location
Kab. bangka,
Kepulauan bangka belitung
INDONESIA
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering)
ISSN : 23555068     EISSN : 26224852     DOI : https://doi.org/10.33019/jurnalecotipe
This scientific journal is called Jurnal Ecotipe (Electronic, Control, Telcommunication, Information, and Power Engineering) with clusters of science in the field of Electrical Engineering covering the field of Electronics, Control, Telecommunications, Information/Informatics, and Power Electricity. The schedule of scientific journal publication is planned 2 times / volume in a year, ie April and October. The author can come from institutions outside the Department or from within the Department of Electrical Engineering University of Bangka Belitung. Aim and Scope : Electronics, Electronic Materials, Microelectronic System, Control System Engineering, Instrumentation and Control Engineering, Robotics, Telecommunication, Modulation and Signal Processing, Antenna and Wave Propagation, Information Technology, Information Theory and Coding, Computer Engineering and Informatics, Electrical and Power Engineering, Transmission and Distribution, Renewable Energy.
Articles 172 Documents
PERENCANAAN STRATEGIS SISTEM INFORMASI MENGGUNAKAN IT BALANCE SCORECARD DI KAMPUS AMIK AKMI BATURAJA Dian Sri Agustina; Yunita Trimarsiah
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 4 No 2 (2017): Jurnal Ecotipe, Oktober 2017
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/ecotipe.v4i2.5

Abstract

Nowadays, the Strategic planning information system was one of the keys in achieving an organization, one of them was at campus of AMIK AKMI Baturaja, where the development of information technology could help to improve the quality and service to the students so that they could produce the quality that was ready to compete. Therefore, this research had the aim to create the strategic planning of information system to increase the performance of Job. The Strategic Planning Model of Information system that would be discussed in this case was by using IT Method of Balance Scorecard. The result of research showed a strategic planning model of information system, which mapped into four BSC IT perspective, they were the orientation of the user's perspective, the contribution of the company, the operational improvement, and the future orientation. To clarify the results of the analysis used tools: SWOT and MC Farlan's. The results of strategic planning were in the form of framework and the future application portfolio. To measure and examine the strategic planning was created, used a SI performance measure, namely IT Balanced Scorecard (BSC). Strategic planning was expected to be the best answer to the problems faced.
IMPLEMENTASI PERAMALAN DOUBLE EXPONENTIAL SMOOTHING PADA KASUS KEKERASAN ANAK DI PUSAT PELAYANAN TERPADU PEMBERDAYAAN PEREMPUAN DAN ANAK Riyadhul Fajri; Teuku Muhammad Johan
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 4 No 2 (2017): Jurnal Ecotipe, Oktober 2017
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/ecotipe.v4i2.6

Abstract

The high number of cases of violence in children today is increasing. Among the cases of child abuse are physical torture, sexual harassment and neglect. Every year violence in children increases with different patterns of behavior. Various efforts were made by the government to campaign for child protection legislation. To forecast an increase or decrease in child abuse patterns over the next 5 years, an inhalamanation-based forecasting system is needed. This inhalamanation system is expected to predict how many cases of child abuse that occur from the time in the future. Double expoential smoothing method is the most widely used method to determine the equation of second smoothing data trend through smoothing process. This forecasting system captures the pattern of past data then used to project future data. The purpose of this system is to provide an idea of ??the level of violence in children. The variables used in this system are the types of cases of domestic violence / Traumatic cases of Persecution, Kidnapping cases, Rape cases and Sodomy case types. The case of violence predicted for four years previous year is in 2012, 2013, 2014, 2015. Then processed using the method of double expnential smoothing by looking for the equation of the trend first and followed by looking for second smoothing and forecasting results of the type of violence in the next year that is 2016. The special target of this forecasting system is to project a pattern of child abuse that is still frequent and predict patterns of violence in children for the next few years. This is done to prepare everything needed to handle cases of violence in the future. Long-term goal to predict the level of violence in children for the next 10 years. This is expected to anticipate the acts of violence that occur in children by looking at previous forecasting data.
RANCANG BANGUN PROTOTYPE SISTEM SMART PARKING BERBASIS ARDUINO DAN PEMANTAUAN MELALUI SMARTPHONE Rudi Rudi; Irwan Dinata; Rudy Kurniawan
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 4 No 2 (2017): Jurnal Ecotipe, Oktober 2017
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/ecotipe.v4i2.7

Abstract

This design Smart Parking aims to design a microcontroller device that is Smart Parking that can inform and direct the driver to the empty parking area. The parking lot used as the research object consists of several parking locations with the capacity of several vehicles, but this study only selects some parking slots as samples. In this design has several common parts used, namely ultrasonic sensors HC-SR04, Arduino Mega, PC / laptop, LCD (Liquid Cristal Display) and IOT (Internet Of Things) research indicates that the LCD will show several parking slots already occupied and Some empty parking slots and monitoring via Smartphone using the Blynk app. As for the crossbar entrance of the parking area using a tool that is servo, and Arduino UNO as the operation of the parking doorstop. In this design the distance of the parking sensor below 6cm indicates that parking slots are occupied and above 6cm indicating the parking slot conditions available on LCD and Blynk applications. As for servo bar entry detects the car at a distance below 5cm servo will open with delay of 3 seconds and if above 5cm indicates that there is no car in front of the sensor bar.
IMPLEMENTASI SISTEM CERDAS LEAST SQUARE DALAM MERAMALKAN PEMENUHAN KEBUTUHAN STOK LISTRIK DI KOTA LHOKSEUMAWE Muhammad Sadli; Safwandi Safwandi
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 4 No 2 (2017): Jurnal Ecotipe, Oktober 2017
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/ecotipe.v4i2.8

Abstract

PLN (Perusahaan Listrik Negara) is one of the BUMN (Badan Usaha Milik Negara) in charge of providing electricity supply needs with the best service quality for the community. The growth of electricity demand for residents of Lhokseumawe City by 2020 is expected to increase to 10%. Based on these predictions, PLN must be able to forecast patterns from data needs lsitrik which has been then used to project the data that will come in order to give the best pelyanan for the community. Forecasting is one of the sciences in the field of intelligent systems that can predict long-term electrical demand in the city of Lhokseumawe. The least square forecasting model can be one of the components supporting the economic growth of Lhokseumawe City. Variables to be predicted in the fulfillment of electricity stocks are seen from household, industrial, commercial and public expenses. Furthermore, the need for electricity stock from each region will be seen from the installed capacity, power capable (MW) and peak load. Then the least quare forecasting model will determine the equation of data trend based on the data needs of electricity that has been then used to project the data needs of electricity to come. This research is expected to produce accurate forecasting value so that can be used as a reference for PLN party in taking policy. Proper forecasting can help PLN to save production cost due to mis-distribution. The specific target of this research is to know the quality of service PLN Lhokseumawe to the public so that the distribution of electricity is always stable. The long-term goal of implementing this smart forecasting system is to help improve the quality of PLN's services in meeting the long-term electricity needs of the people of Lhokseumawe.
PENGHITUNG SETPOINT DOWN COUNTER OTOMATIS PADA LAMPU LALU LINTAS DENGAN MENGGUNAKAN PANEL LED DOT MATRIX Galih Mustiko Aji; Purwiyanto Purwiyanto
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 4 No 2 (2017): Jurnal Ecotipe, Oktober 2017
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/ecotipe.v4i2.9

Abstract

Down counter on the traffic light provides information for drivers on how long the lamps will be on or off, then they are not careless who can cause traffic jam and accidents. The instalation of down counter needs value of set point which derived from the traffic light controller or it is set manually by technician. The design of down counter which is capable of standing by itself, it is possible to use less cables and it will facilitate on its time changing and the maintenance of traffict light. In this research, a down counter which counts by itself will be create value of set point which designed by using display of let dot matrix panel with the size of 32x32 pixel. It is able to display figures as many as 2 digits of 99 until 00.
PENGUJIAN DAYA PANCAR ANTENA YAGI TERHADAP EMPAT JENIS ANTENA PENERIMA Andy Sri Irtawaty; Maria Ulfah; Hadiyanto Hadiyanto
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 4 No 2 (2017): Jurnal Ecotipe, Oktober 2017
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/ecotipe.v4i2.10

Abstract

In this study, yagi antena is used as a receiving antena at a frequency of 500 MHz. The receiving antena to be tested for its characteristics are 4 types, namely dipole antena, monopole antena, circular loop antena and yagi antena. The purpose of this research is to know the quality of antena yagi as the sending antena to 4 types of receiving antena tested. The parameters used as benchmark comparison is the gain and antena polarization. The process of measuring the parameters of antena yagi as transmitter antena and dipole antena, monopole antena, circular loop antena and yagi antena as the receiving antena is done by an antena trainner with supporting software. Data retrieval is done in 2 conditions namely Line Of Sight (LOS) and using obstacle (NO-LOSS). The distance between the transmitting antena and the receiving antena is 1.5 meters, 2 meters, 2.5 meters, 3 meters and 5 meters. The slope position of the antena is also a determining factor in the measurement process. There are 3 categories namely, horizontal (antena sender) and horizontal (antena receiver), vertikal (antena sender) and vertikal (antena receiver) and combination of horizontal (antena sender) and vertikal (antena receiver).. The results of antena quality testing showed that among the 4 types of antena (dipole, monopole, circular loop and yagi), it was proven that the yagi antena had a perfect 100% accuracy test. The yagi antena is proved to have a gain value and an ideal radiation pattern, so it is suitable to be implemented as a transmitting antena and receiving antena.
PROFIL BEBAN PADA SISTEM KELISTRIKAN UNIVERSITAS BANGKA BELITUNG Wahri Sunanda
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 4 No 1 (2017): Jurnal Ecotipe April 2017
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/ecotipe.v4i1.11

Abstract

University of Bangka Belitung is currently supplied by PLN Bangka Belitung region with 690 kVA power supply to meet the need of electric energy on campus with total land 153 ha. Through direct measurements on the panels of each building, it is found that the use of power in the morning is higher than the use of power in the afternoon. Total power (3 phases) in the morning ie 194.6425 kW, while in the afternoon 154,0396 kW.
RANCANG BANGUN ROBOT LENGAN DENGAN PENGGERAK SISTEM PNEUMATIK MENGGUNAKAN PLC Supriyono Supriyono; Muhamad Yusuf; Arief Ainur Rafiq
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 4 No 1 (2017): Jurnal Ecotipe April 2017
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/ecotipe.v4i1.12

Abstract

Utilizing of robots is increasing every year, especially in the industrial field. Robotic arm is one type of robot that used in industry. This robotic arm system is used to move an object from one point to another using a gripper. In this research, the pneumatic system is used as the actuator of the robotic arm (manipulator) and Programmable Logic Controller (PLC)is usedas the controller. The results of this prototype research isa robotic arm that can move object from one point to another point that has been determined. Timing diagrams are used to describe the movement of each arm on the robot. From the experimental results of the overall system, the average time of the robotic arm to move one object in one cycle movement is 18.46 seconds, with a settling time of one cycle is 18 seconds.
KARAKTERISTIK BATANG PENTANAHAN SISTEM ARANG-GARAM (SIGARANG) SEBAGAI UPAYA PERBAIKAN SISTEM PENTANAHAN Zainal Abidin
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 4 No 1 (2017): Jurnal Ecotipe April 2017
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/ecotipe.v4i1.13

Abstract

The research was conducted in Lamongan regency in the south of Sarirejo Village and Mantup Subdistrict of Lamongan Regency, which is a sample of most of the soil conditions in the area which is dry with an average water depth of 100 m, so in the case of electric ground becomes less ideal. According to PUIL 2000 that the grounding on the infiltration of the recommended house at least 5? and a maximum of 10?. The use of a charcoal system grounding model (SIGARANG) becomes an earthing alternative that can be used for earthing household installation systems. Based on the result of the research, it is concluded that ground water, salt and charcoal with the size of 5: 2: 1 yields an average resistivity value of 1.52 ? on soil of wet soil conditions in Table 4.1, and an average of 2.43? on wetland of wet conditions in Table 4.3. compared with the method without the mean of the average value on 3? and 3 tanah lime soils. Grounding using water, salt and char (SIGARANG) can produce 75% earthing efficiency in limestone soils. The earth earthing efficiency of the soil is 65% on average compared to groundless earth.
RANCANG BANGUN SISTEM PENELITIAN DAN PENGABDIAN MASYARAKAT UNIVERSITAS BANGKA BELITUNG BERBASIS WEB SERVER Ghiri Basuki Putra
Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) Vol 4 No 1 (2017): Jurnal Ecotipe April 2017
Publisher : Jurusan Teknik Elektro, Universitas Bangka Belitung

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33019/ecotipe.v4i1.14

Abstract

Tridharma Perguruan Tinggi is Teaching, Research and Community Service that must be implemented by every lecturer. Sources of funding for research and Community Service for university lecturers vary, ranging from university level as well as from the Ministry of Research and Higher Education. At the University of Bangka Belitung (UBB), the process of submitting research proposals and Community Service to lecturers is still done manually and there is no online system to support and simplify the proposal submission process and proposal assessment. As for the national level has been using a system called Information Systems Research and Community Service or abbreviated simlitabmas that can be used by all lecturers in Indonesia in submitting research proposals and Community Service to get funding. In the design of research system and dedication, build a system like simlitabmas from Risetdikti to facilitate lecturers in submitting research proposal of university level online and can be done online proposal assessment by university level accessor also online. In this research, build design Lecturer Research and Service System Based Webserver online. The system is built with a web-based integrated system using PHP and MySQL databases. So without printing the proposal and save the cost of printing and paper, lecturers can make submission of research proposal and community service.

Page 1 of 18 | Total Record : 172