Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : CCIT (Creative Communication and Innovative Technology) Journal

Application of the Fuzzy Method in the Design of Control and Monitoring Systems for Flood Canal Pump Houses Lukman Medriavin Silalahi; Linggar Amnesta Virgian
CCIT (Creative Communication and Innovative Technology) Journal Vol 14 No 2 (2021): CCIT JOURNAL
Publisher : Universitas Raharja

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (690.935 KB) | DOI: 10.33050/ccit.v14i2.1486

Abstract

The purpose of making a prototype of the canal to flood the pump house is namely as a means of ideas that may later be applied to the pump house in Indonesia. At the end of this task will be made protorype flood canal house pump with which it can work according to the speed of the incoming flow and the height of the water in the canal, on hulu there are 1 pump 12V which will drain the water into the canal and also waterflow as a tool that can detect the incoming flow. At the pump house there are 3 pump and 1 water level which will work according to the inflow and the height of the channel. Fuzzy Logic is one method of system control can provide decision that resembles the human decision. In the design process of this plant, used a system of development control of the fuzzy logic system using Arduino. It is intended for a design on the plant control system and monitoring of the pump house flood canal. The use of the Speed Controller PWM on the circuit can work well in regulating the pump speed in the work. Pump 1 and pump 2 has a maximum value of the PWM 144 that can remove water 180 ml that works on low currents and are and sodetan have the value of the PWM to 255 that can get water out of 318 ml of working on a heavy flow.
Solar Panel Drive Design Based Internet of Things Freddy Artadima Silaban; Arga Gilang Rolanda; Lukman Medriavin Silalahi; Setiyo Budiyanto
CCIT Journal Vol 16 No 1 (2023): CCIT JOURNAL
Publisher : Universitas Raharja

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (806.92 KB) | DOI: 10.33050/ccit.v16i1.2363

Abstract

Indonesia is located on the equator which makes the island irradiated by the sunlight from 10 to 12 hours per day. The use of solar cell panels is generally placed in certain positions without change. For the optimal consumption of solar energy, then we need a system that follows the sun called a solar tracking system. Research the solar tracker automatically moves on an edge 0° - 180° and otherwise. To control or operate solar cells and easier the maintenance process of solar cell panels, then we need a system called IoT (Internet of Things) combine with microcontroller ESP8266 access on the Thingspeak application. The result of this study shows servo motors moved every 1 hour by 20 degrees from 6 am to 5 pm by the solar panels. Equipped with sensors INA219 to know the results of the solar energy that absorbs by the solar cells and shown on the Thingspeak application.