Garuda - Garba Rujukan Digital

p-Index From 2019 - 2024

1.376

P-Index

This Author published in this journals

All Journal Petro : Jurnal Ilmiah Teknik Perminyakan JURNAL ABDI MASYARAKAT INDONESIA (JAMIN) Journal of Earth Energy Science, Engineering, and Technology

Ridha Husla

Universitas Trisakti

Author-ID : 3198970

Earth & Planetary Sciences Economics, Econometrics & Finance Energy Engineering Environmental Science Other

Published : 6 Documents Claim Missing Document

Claim Missing Document

Articles

EVALUASI PERFORMA PRODUKSI SUMUR PADA STRUKTUR NAD DENGAN MENGGUNAKAN METODE CHAN’S DIAGNOSTIC PLOT DAN DECLINE CURVE ANALYSIS Nadira Putri Irianto; Muh Taufiq Fathaddin; Ridha Husla
PETRO:Jurnal Ilmiah Teknik Perminyakan Vol. 7 No. 3 (2018): Desember
Publisher : Jurusan Teknik Perminyakan Fakultas Teknologi Kebumian dan Energi Universitas Trisakti

Evaluasi reservoir merupakan kegiatan rutin yang tidak dapat diabaikan agar dapat menentukan strategi pengurasan yang paling menguntungkan. Skripsi yang berjudul “Evaluasi Performa Produksi Sumur pada Struktur NAD dengan Menggunakan Metode Chan’s Diagnostic Plot dan Decline Curve Analysis” ini dibahas mengenai evaluasi performa produksi berdasarkan performa produksi sumur ND-05 agar mekanisme perilaku air yang terjadi pada tiap-tiap sumur dan ramalan penurunan produksi minyak keseluruhan pada struktur NAD. Metode Chan’s Diagnostic Plot adalah sebuah metode baru untuk menentukan mekanisme produksi air dan gas yang berlebihan dalam sumur produksi minyak bumi yang telah dikembangkan dan diverifikasi. Chan mengamati log-log plot WOR dan WOR’ vs waktu untuk mengetahui problema perilaku air di dalam sumur produksi. Metode Decline Curve Analysis dianalisa dari data produksi minyak dan air pada sumur di struktur NAD lapangan X untuk mengetahui kinerja laju produksi sumur pada periode waktu yang akan datang.

STUDI LABORATORIUM PENGGUNAAN LUMPUR SMOOTH FLUID 05 DAN SARALINE PADA TEMPERATUR TINGGI Apriandi Rizkina Rangga Wastu; Ridha Husla; Lilik Zabidi; Abdul Hamid
PETRO:Jurnal Ilmiah Teknik Perminyakan Vol. 9 No. 4 (2020): DESEMBER
Publisher : Jurusan Teknik Perminyakan Fakultas Teknologi Kebumian dan Energi Universitas Trisakti

Dalam operasi pemboran, lumpur pemboran mempunyai peranan yang sangat penting karena memiliki fungsi-fungsi yang tak tergantikan. Kegiatan pemboran berhubungan dengan masalah-masalah yang disebabkan oleh kondisi yang kompleks di formasi karena adanya perubahan temperatur, tekanan, dan kontaminasi dari fluida formasi. Penggunaa lumpur pemboran diperlukan untuk dapat menghadapi permasalahan-permasalahan tersebut. Pada penelitian mempunyai latarbelakang untuk mengetahuai seberapa berhasilkan penggunaan system lumpur Oil Base Mud berupa Saraline dan Smooth Fluid 05. Diketahui pada pemboran offshore pengaruh tekanan dan temperatur sangat mempengaruhi kualitas dari lumpur yang digunakan. Pada saat sirkulasi lumpur akan mendapat pengaruh temperatur tinggi dari formasi tersebut. Pada pembuatan lumpur pemboran ini dilakukan untuk memperoleh suatu hasil formulasi yang tahan terhadap perubahan temperatur, tekanan, dan kontaminasi oleh karena itu pemilihan aditif sangat penting, terutama jika terjadi perubahan temperatur pada lapangan tersebut serta kompatibel satu sama lain. Pengujian pada lumpur ini yaitu untuk mengetahui apakah terjadi perubahan pada sifat fisik lumpur tersebut seperti densitas, rheology lumpur, filtration loss, dan electrical stability jika lumpur tersebut diberikan perubahan temperatur tinggi. Berdasarkan hasil penelitian ini bahwa semakin tinggi temperatur maka nilai densitas dan rheology lumpur (plastik viskositas, yield point dan gel strength), tersebut akan semakin menurun dikarenakan faktor dari suhu tersebut yang membuat lumpur semakin encer. Pada nilai Filtration loss pada kedua sample tersebut menunjukan kenaikan sebesar 4,6 – 5,5 cc/30 menit namun masih dalam batas wajar karna masih sesuai dengan standarisasi yang digunakan. Pada nilai electrical stabilitas pada kedua sample lumpur tersebut menunjukkan semakin tinggi temperatur maka nilai electrical stabilitas pada sample lumpur tersebut akan semakin menurun, namun hasil pada sample lumpur ini mempunyai hasil diatas 500 volt maka komposisi lumpur minyak saraline dan smooth fluid 05 dengan nilai oil water ratio 85:15 mempunyai kandungan oilwet yang sangat baik Kata kunci: Lumpur Pemboran, Oil Base Mud, Temperatur, rheology, Filtration loss, Electrical Stability, Saraline, Smooth Fluid 05

PENYULUHAN DAN PELATIHAN PEMANFAATAN LIMBAH PLASTIK SEBAGAI BAHAN BAKAR DI PANDEGLANG, BANTEN Samsol Samsol; Sigit Rahmawan; Apriandi Rizkina; Ridha Husla; Havidh Pramadika
Jurnal Abdi Masyarakat Indonesia (JAMIN) Vol 1 No 1 (2019): JURNAL ABDI MASYARAKAT INDONESIA (JAMIN)
Publisher : Universitas Trisakti

Volume limbah plastik yang semakin banyak, serta semakin mahal dan langkanya bahan bakar rumah tangga menjadi tantangan peneliti dalam mencari energi baru dan terbarukan sekaligus memanfaatkan barang – barang yang dianggap limbah menjadi barang yang bisa memiliki pengganti energi alternatif, sehingga dapat membantu masyarakat dalam mengoptimalkan ekonomi keluarga. Kegiatan PKM ini bertujuan untuk memberikan penyuluhan dan pelatihan kepada masyarakat agar dapat memanfaatkan limbah plastik yang tidak dimanfaatkan untuk menjadi bahan bakar alternatif yang dapat dimanfaatkan masyarakat sebagai bahan bakar di rumah tangga. Sehingga dapat membantu masyarakat dalam pengeluaran pembeliaan gas maupun minyak tanah sebagai bahan bakar dalam memasak maupun bahan bakar kendaraan.

PENGUJIAN SIFAT FISIK LUMPUR PEMBORAN BERBAHAN DASAR MINYAK JELANTAH SEBAGAI PENGGUNAAN LUMPUR PEMBORAN YANG RAMAH LINGKUNGAN Apriandi Rizkina Rangga Wastu; Ghanima Yasmaniar; Ridha Husla; Aqlyna Fattahanisa
PETRO:Jurnal Ilmiah Teknik Perminyakan Vol. 11 No. 3 (2022): SEPTEMBER
Publisher : Jurusan Teknik Perminyakan Fakultas Teknologi Kebumian dan Energi Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/petro.v11i`3.9929

The well drilling process is highly dependent on the performance of the drilling mud that is used. The use of oil-based mud that is more environmentally friendly continues to grow by utilizing environmentally friendly or biodegradable materials. This research was conducted to determine whether the use of used cooking oil or waste oil can be reused as a type of oil-based mud that has the same characteristics as Saraline mud or palm oil-based mud. The mud will be tested at several temperatures by testing the physical properties of the mud in the form of density and viscosity. The reference used in this study is the API 13B-2 standard laboratory specification. The result of this research is that the used cooking oil mud is successfully made if the oil water ratio (OWR) is changed to 90:10 and mix used cooking oil with saraline oil in a ratio of 50:50. Based on the tests that have been carried out on the physical properties of density, for samples of saraline mud and samples of used cooking oil mud at temperature of 100oF, there is no addition of barite because it is in accordance with the desired specifications, but for samples of saraline mud at temperatures of 200oF and 300oF, additives of barite are added of 25 gr and 40 gr, respectively, and for used cooking oil mud at temperatures of 200oF and 300oF, the addition of barite additives are 60 gr and 75 gr, respectively, so that all mud can meet the desired specifications. Meanwhile, in viscosity testing, the viscosity values of the samples of saraline mud and used cooking mud at temperatures of 100oF, 200oF, and 300oF, met the desired standard specifications.

ANALISIS DENSITAS LUMPUR STARCH DAN DRISPAC TERHADAP PROSES PENGANGKATAN CUTTING DENGAN MENGGUNAKAN METODE CUTTING TRANSPORT RATIO Apriandi Rizkina Rangga Wastu; Ridha Husla; Ghanima Yasmaniar; Prayang Sunny Yulia; Mario Valentino Dio; Tedy Subardja
PETRO: Jurnal Ilmiah Teknik Perminyakan Vol. 12 No. 2 (2023): JUNI
Publisher : Jurusan Teknik Perminyakan Fakultas Teknologi Kebumian dan Energi Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/petro.v12i2.16427

The use of the right drilling mud in a drilling well has a good ability to clean the hole so that the process of removing the cutting to the surface can run optimally.. Aim: In this research, we will analyze the physical properties of density mud using starch and Drispac mud samples which are natural. The two mud samples are used to find out whether the two mud samples can carry cuttings optimally. Cutting Transport Ratio is one of the cutting removal methods used in the cutting lifting process using the average speed and slip speed of the mud. The cutting removal process can be said to be successful if it has a percentage of > 50%. Methodology and Results: The starch and Drispac sludge samples will be tested using several temperatures, namely 150°F, 200°F and 250°F. Both samples will be tested for their physical properties, namely the density value. The selected density value is one of the parameters needed in the slip speed calculation process in the cutting lifting process. The density value obtained in the starch mud sample was 8.7-9.1 ppg while in the Drispac sample it was 8.65 - 9 ppg. These results are the initial results obtained, but because the results on the 200°F and 250°F samples are not in accordance with the specifications, an additional barite is needed for each of these samples. Both starch and drispac sludge added 60 grams of barite at a sample temperature of 200°F and 120 grams at a sample temperature of 250°F. The results of the density values obtained when barite was added were 10-10.7 ppg for starch mud samples and 9.9-10.65 ppg for Drispac mud samples. The results of the density test will be carried out by testing the removal of cuttings using the Cutting Transport Ratio. The results obtained for the two samples, for starch sludge, obtained a value of 98.31-99.19% while for drispac mud 98.61-99.18%.m. Conclusions: The increase in temperature causes the value of the filtration loss to decrease because the water content in the filtrate also evaporates, causing the filtration loss to decrease. The mudcake value in this experiment was also influenced by the results of the filtration loss value. The higher the filtration loss value, the thicker the value of the mudcake is due to the large number of precipitated particles.

Performance Analysis of Water Injection Well BEL-13 and Production Well BEL-01 Using Hall Plot and Buckley-Leverett Methods Yanni Florensia Imanuela Sairlela; Muhammad Taufiq Fathaddin; Ridha Husla
Journal of Earth Energy Science, Engineering, and Technology Vol. 6 No. 2 (2023): JEESET VOL. 6 NO. 2 2023
Publisher : Penerbitan Universitas Trisakti

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25105/jeeset.v6i2.17232

At first, the FLO field had an ability to flow fluids to the surface in a natural flow, but the production capacity decreased with time. Therefore, production is increased using the waterflooding method. The purpose of this study was to analyze the performance of waterflooding carried out on injection well BEL-13 and production well BEL-01. There are two methods used in this study to achieve the desired aims and objectives, namely the Hall Plot method and the Buckley-Leverett method. The Hall Plot method was used to see the connectivity conditions between injection and production wells after being injected with water periodically. Whereas the Buckley-Leverett method was used to estimate the time of water breakthrough, production amount (Np), the injection rate (Wi), water cut value (WC), and recovery factor (RF). Based on the Hall Plot method, it was found that the waterflooding carried out was stable or normal because there was no negative skin or positive skin. In addition, based on relative permeability curve, rock wettability of the reservoir rock is water wet. Analysis using Buckley-Leverett shows that the cumulative production at the time of water breakthrough from the injection well BEL-13 to the production well BEL-01 is 364,733.64 STB. When the water breakthrough occurs, the predictions of WOR, water cut, and recovery factor are 2.13, 68.08%, and 29.76%.

Co-Authors Abdul Hamid Apriandi Rizkina Apriandi Rizkina rangga Wastu Aqlyna Fattahanisa Ghanima Yasmaniar Havidh Pramadika lilik zabidi Mario Valentino Dio Muh Taufiq Fathaddin Muhammad Taufiq Fathaddin, Muhammad Taufiq Nadira Putri Irianto Samsol Samsol Sigit Rahmawan Tedy Subardja Yanni Florensia Imanuela Sairlela Yulia, Prayang Sunny

Title

Found 6 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 6 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 6 Documents
Search