Articles
RANCANG BANGUN PROTOTIPE SISTEM HYBRID PV-PLN-BATERAI PADA KINCIR AIR DI TAMBAK UDANG
Rachmad Ikhsan;
Zoel Fachri
J-Innovation Vol. 10 No. 1 (2021): Jurnal J-Innovation
Publisher : Politeknik Aceh
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (374.581 KB)
|
DOI: 10.55600/jipa.v10i1.17
The source of electrical energy to turn on the waterwheel drive in the majority of shrimp ponds is currently still sourced from PLN and backup energy comes from generators. Fossils will continue to decrease and take a long time to be renewed, so to overcome this, a waterwheel is designed with a source of electricity generation from renewable energy in the form of energy from the sun (photovoltaic) combined with electrical energy from PLN and batteries as backup energy . The method of switching electrical energy through the settings of the Arduino controller with input from the input voltage sensor (ZMPT 101B). From the test results of the PV-PLN-Battery hybrid system, the switching process can work well and from the results of the solar panel test it can be seen that there is no significant difference taken with a time difference of 1 (one) hour where when the weather is sunny and cloudy the voltage is higher. The resulting solar panels look stable.
PERENCANAAN ALAT INTERLOCKING BRICKS SYSTEM DENGAN SISTEM HIDROLIK TERKONTROL
Zoel Fachri;
Herri Darsan
J-Innovation Vol. 4 No. 1 (2015): J-Innovation
Publisher : Politeknik Aceh
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (334.282 KB)
|
DOI: 10.55600/jipa.v4i1.19
Perkembangan ilmu pengetahuan dan teknologi khususnya dalam bidang permesinan dan elektronika telah membawa perubahan besar dalam tatanan kehidupan manusia, seperti untuk menciptakan suatu proses pengerjaan yang cepat untuk menghasilkan sebuah produk. Saat ini di lingkungan kita sendiri bahkan juga pemerintah sedang gencar – gencarnya melakukan pembangunan maka oleh karena itu mungkin dapat membantu memenuhi kebutuhan pada sektor tersebut. Penulis menciptakan Alat Interlocking Brick System. Alat ini dikendalikan melalui sebuah panel kontrol dengan memanfaatkan sistem hidrolik. alat ini dapat berkerja dengan dua mode sistem kerja yaitu sistem kerja manual menggunakan hand valve dan juga sistem kerja dengan menggunakan tombol serta di lengkapi dengan satu tombol emergency yang berguna untuk meng-non aktifkan semua sistem kerja alat serta sebagai pengaman apabila terjadi kecalakaan kerja. Untuk melakukan proses pembuatan batu bata interlocking brick system ini menggunakan mould (cetakan) yang sesuai dengan jenis batu bata tersebut yaitu menggunakan mould interlocking brick system, Untuk melakukan proses pencetakan interlocking brick system penggerakannya menggunakan sistem aktuator hidrolik. Hasil dari alat Interlocking Brick System ini diharapkan dapat mencetak intercking brick system dengan baik.
SISTEM PENGISIAN SALDO KWH METER DIGITAL PRABAYAR JARAK JAUH BERBASIS SMS GATEWAY
Zoel Fachri;
Nasrullah
J-Innovation Vol. 4 No. 2 (2015): Jurnal J-Innovation
Publisher : Politeknik Aceh
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (332.499 KB)
|
DOI: 10.55600/jipa.v4i2.25
As the development of the current technology all the things already made easy with State of the art equipment as well as prepaid electricity kWh meter functionality so users can power savings and not the onset of delinquency, this is beneficial Power of State parties (PLN) but complicates the user (consumer) in filling the power balance prepaid charging process manually via keypad. Balance SMS-based charging system will simplify the user in filling out the balance of electricity prabayarnya those in homes through official place of purchase electric token. The control system developed by mikrokontroller programming and communication interface which is connected with a digital meter prepaid and computers as well as mobile devices can run well but still the need for synchronization with the PLN to get optimal results.
KAJIANPENERAPAN SISTEM BUILDING INTEGRATED PHOTOVOLTAICS (BIPV) PADA RANCANGAN RUMAH MINIMALIS DI KOTA BANDA ACEH
Zoel Fachri;
Ira Devi Sara;
Rakhmad Syafutra Lubis
J-Innovation Vol. 5 No. 1 (2016): Jurnal J-Innovation
Publisher : Politeknik Aceh
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (962.186 KB)
|
DOI: 10.55600/jipa.v5i1.29
The potential of renewable energy in Indonesia is very large, clean and environmentally friendly. In its utilization has not been optimal pemanfataan renewable energy renewable electricity generation costs caused such solar power can't compete with the cost of energy-fueled power plant fossil remains a challenge in the energy sector. Generating statistical data in the State Llistrik 2015 the ratio of electrification in the aceh province reached 94.17% produced by fossil-fueled power plants with the largest electric energy consumption in households. Targeted national energy by 2050, an area dominated by renewable energy which is the vision of the green city Banda Aceh regarding renewable energy utilization strategy policy. The application of Building Integrated Photovoltaik (BIPV) on the minimalist house in Banda Aceh against the slope of the roof 5 °, 10 °, 15 °, 20 °, 25 °, 30 ° and 35 ° be solutions in the utilization of renewable energy. The intensity of the radiation in the city of Banda Aceh in the past year the average reach 5 kWh/m2 and the maximum temperature in the year i.e. 34.4 ° C as well as the assumption of the electric energy needs at home, minimalist type 70 of 10368 Wh/day. The results of the simulation using software Skelion get the highest PV energy estimation on minimalist House against the slope of 5 ° of 26.2 kWh/year. But in terms of the aesthetics of a house in the tropics with a good saddle roof modeling that is on a slope of 30 ° and the electric energy generated 24.5 kWh/year.
IMPLEMENTASI SENSOR SEMIKONDUKTOR SEBAGAI ROBOT PENDETEKSI KEBOCORAN GAS
Rouhillah;
Zoel Fachri;
Zaki Akbar
J-Innovation Vol. 7 No. 1 (2018): Jurnal J-Innovation
Publisher : Politeknik Aceh
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (541.326 KB)
|
DOI: 10.55600/jipa.v7i1.51
Hazardous gas detection robot using semiconductor sensor is aimed to help operators high risk jobs. This harmful gas detector robot using RF Wireless is able to detect gas leaks by using the semiconductor sensor such as MQ2 sensors. Robot use the LCD to display the presence or absence of gas detected by the MQ2, and a buzzer as the alarm if gas is detected. The advantage of this robot is the robot can detect locations of gas that can’t be reached by humans. The robot is controlled by using a joystick which data is sent by NRF24L01transmiter with maximum distance ±100 meter, so it helps people in the finding of a gas leak location process.
RANCANG BANGUN ROBOT PENYEMPROT PESTISIDA (ROBOT SIDA) PADA TANAMAN HORTIKULTURA
Zoel Fachri
J-Innovation Vol. 8 No. 1 (2019): Jurnal J-Innovation
Publisher : Politeknik Aceh
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (132.555 KB)
|
DOI: 10.55600/jipa.v8i1.67
Penyemprotan pestisida pada dasarnya berfungsi untuk menyemprot hama pada tanaman hortikultura di area bedengan secara aman, dengan tujuan untuk menghindari keracunan atau dampak bahaya lainnya yang disebabkan oleh pestisida, maka dibuatlah sebuah robot yang dapat meminimalisir akan bahaya pestisida terhadap petani yaitu Rancang Bangun Robot Penyemprotan Pestisida (Robot Sida) pada Tanaman Hortikultura. Koneksi pengontrolan robot ini menggunakan Bluetooth HC-05 sebagai penghubung antara robot dan user yang diaplikasikan pada remot joystick. Robot ini dilengkapi pendeteksi cairan pestisida untuk mengetahui volume pestisida dalam tangki yang apabila pestisida kosong maka buzzer akan berbunyi. Robot ini mampu menyemprot pestisida dengan 4 arah penyemprotan yaitu pada radius 00, 2200, 2700, dan 3200 dengan hasil penyemprotan yang sangat baik, namun jarak yang ditempuh robot masih terbatas dengan remote control.
KONVEYOR PORTABLE PEMUAT TANDAN BUAH SEGAR (TBS) KELAPA SAWIT KE KENDARAAN PENGANGKUT
Zoel Fachri;
Muhammad Muslem
J-Innovation Vol. 9 No. 1 (2020): Jurnal J-Innovation
Publisher : Politeknik Aceh
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
Full PDF (332.616 KB)
|
DOI: 10.55600/jipa.v9i1.88
The process of sorting oil palm fresh fruit bunches in the loading ramp is carried out by male operators in the form ofactivities to reduce and raise oil palm bunches to trucks with the weight of oil palm bunches ranging from 20 kg to 25 kgusing a corner. workers have to manually raise oil palm bunches by piercing oil palm fruits and raising them into truckscausing operators to complain of muscle pain (MSDs), the complaints experienced by operators are increasing in proportionto the number of trucks that must be loaded or unloaded. So from the above problems the authors make a new innovationthat is Portable Oil Palm Bunch Loader Conveyor into the Transport Vehicle. The palm oil bunch loader loader is poweredby a DC motor with a 12 volt voltage, the source of energy from car battery batteries that are on site. On this conveyor thereare 2 legs (pedestal) front and back, the height of the rear legs 50 cm (fixed) and the front legs can be set at a height of 100cm (slope 9̊) and a height of 140 cm (slope 14̊), at a height of 100 cm with a load of 46 kg voltage of 12.03 Volts, current134.0 mA, motor speed of 5.4 rpm and at an altitude of 140 cm with a load of 46 kg voltage of 12.03 Volts, current of 151.4mA, motor speed of 5.4 rpm. From the results of testing the conveyor is able to transport oil palm up to a weight of 46 kginto a transport vehicle in one charge.
PENGENDALIAN QUADCOPTER MENGGUNAKAN CC3D FLIGHT CONTROLLER
Zoel Fachri;
Muhammad Ichsan
J-Innovation Vol. 11 No. 2 (2022): Jurnal J-Innovation
Publisher : Politeknik Aceh
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.55600/jipa.v11i2.156
Quadcopter technology is currently growing rapidly and is widely used in various needs, both in the fields of education, military, multimedia, health and others. In the quadcopter flight phase at a certain altitude critical phases often occur such as shocks and instability due to external influences such as wind. These problems make research to control the quadcopter in maintaining a stable altitude and movement with roll, pitch and yaw positions. Quadcopter control to produce stability is set using a PID control system with these parameter values processed into the CC3D Flight Controller as well as error feedback from the gyroscope and accelerometer sensors. The results of the study show that a quadcopter using the CC3D flight controller can maintain a flight altitude of 15 meters with a value of KP = 0.0030, Ki = 0.000050 and Kd = 0.0030.
Bahasa Indonesia Roadside Sweeper Pada Tepi Jalan Raya Menggunakan Motor Listrik DC
Rachmad Ikhsan;
Zoel Fachri;
Teuku Syukri
J-Innovation Vol. 12 No. 1 (2023): Jurnal J-Innovation
Publisher : Politeknik Aceh
Show Abstract
|
Download Original
|
Original Source
|
Check in Google Scholar
|
DOI: 10.55600/jipa.v12i1.171
Roadside sweeper is a tool that can sweep garbage in the form of leaves or small tree branches on the roadside. Roadside sweeper designed to use a DC electric motor as the driving force. This roadside sweeper also uses an emergency button for emergencies such as garbage getting stuck in a shelter which causes the driving motor to stop and stall. After testing the sweeper components and sweeper motor on the frame, it is known that the sweeper components and sweeper motor can function optimally, at a voltage of 12 Volts. From the test results it was also found that with a battery power of 3.5 Ah the Roadside Sweeper tool can work for 126 minutes and can run properly. This Roadside Sweeper tool can be concluded that to clean the roadside with optimal cleanliness, this tool must do 2 times of rotation to get satisfactory results.