Rulli Ranastra Irawan, Rulli Ranastra
Unknown Affiliation

Published : 6 Documents Claim Missing Document
Claim Missing Document
Check
Articles

Found 6 Documents
Search

KAJIAN SIFAT KIMIA, FISIKA DAN MEKANIKA SEMEN PORTLAND DI INDONESIA Irawan, Rulli Ranastra
Jurnal Jalan-Jembatan Vol 34 No 2 (2017)
Publisher : Direktorat Bina Teknik Jalan dan Jembatan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (645.731 KB)

Abstract

Diproduksinya tipe semen PCC dan PPC saat ini didasarkan pada isu lingkungan, dimana emisi CO2 yang dihasilkan dalam produksi semen Portland dengan jumlah yang setara menjadi lebih sedikit, tanpa mengurangi kekuatannya. Namun, keraguan akan kinerja blended cement masih muncul dari para pelaku industri konstruksi terutama industri infrastruktur transportasi, seperti jalan dan jembatan yang masih enggan menggunakan PCC maupun PPC. Penelitian ini bertujuan untuk mengetahui sebaran parameter sifat kimia,  fisika dan mekanika berbagai semen Portland yang tersedia di pasaran, sehingga dapat menjelaskan perbedaan antara OPC, PPC dan PCC di Indonesia secara ilmiah. Penelitian dilakukan dengan mengambil contoh semen Portland secara acak dari pasar di beberapa daerah di Indonesia untuk kemudian diuji sifat kimia, fisika dan mekaniknya, mengacu pada  Standar Nasional Indonesia (SNI) yang berlaku. Pengujian kimia meliputi persentase dari bagian tak larut, SiO2, Fe2O3, Al2O3, CaO, MgO, SO3, hilang pada pemijaran, alkali sebagai Na2O, dan kapur bebas. Pengujian fisika meliputi kehalusan, waktu pengikatan awal, waktu pengukatan, akhir, kekekalan bentuk, pengikatan semu, penetrasi akhir,  kandungan udara dalam mortar, dan berat jenis, sedangkan pengujian mekanik  meliputi kuat tekan pada umur 3, 7 dan , 28 hari. Setelah itu, hasilnya dibandingkan dengan spesifikasi yang disyaratkan. Hasil penelitian menunjukkan bahwa rata-rata contoh yang diperiksa memenuhi ketentuan yang disyaratkan dalam SNI, namun ternyata sebaran yang terjadi terhadap setiap parameter yang ditentukan dalam spesifikasi menunjukkan rentang yang cukup besar, dimana koefisien variasi sifat kimia terkecil sebesar 4 % dan terbesar mencapai 75 %, selanjutnya sifat fisika terkecil sebesar 1,7 % dan terbesar mencapai 105%, sedangkan sifat mekanika terkecil sebesar 17,6 % dan terbesar mencapai 20,4 %.
PERBANDINGAN SIFAT DAN KARAKTERISTIK BETON GEOPOLIMER TERHADAP BETON SEMEN PORTLAND UNTUK KEKUATAN STRUKTUR BALOK (COMPARISON OF THE PROPERTIES AND CHARACTERISTICS OF GEOPOLYMER CONCRETE AND PORTLAND CEMENT CONCRETE FOR STRUCTURAL BEAM STRENGTH) Setiati, N. Retno; Irawan, Rulli Ranastra
Jurnal Jalan-Jembatan Vol 35 No 2 (2018)
Publisher : Direktorat Bina Teknik Jalan dan Jembatan

Show Abstract | Download Original | Original Source | Check in Google Scholar

Abstract

Fly ash is a coal combustion product from several power plants. Currently, F type fly ash is commonly used for concrete mixes. This study discusses the effect of 100% addition of fly ash on concrete mixes. In this study cement is substituted with fly ash. Laboratory testing is performed by making a physical model in the form of reinforced concrete beams. Test results were compared between geopolymer concrete and conventional concrete. To determine the mechanical properties of concrete, the specimen was made in a cylindrical shape measuring 150 mm x 300 mm and a beam measuring 150 mm x 150 mm x 600 mm. To determine the structural capacity of geopolymer and conventional concrete, two structural beams measuring 150 mm x 350 mm with a length of 4000 mm were made. The testing of structural beams was undertaken according to the ACI 437.1R-07. Then, the laboratory test results are compared to the theoretical analysis. Based on the results it was found that beams strength made of geopolymer concrete is almost equivalent to the conventional concrete. Based on the test results, the load capacity of the geopolymer concrete beam structure of 87.5 kN with a deviation of 38% for theoretical analysis. For conventional concrete, the load capacity is 109.2 kN with a deviation of 25% compared to theoretical analysis. In addition, the structural capacity value of geopolymer and conventional concrete beams based on the results of laboratory tests is smaller than the results of theoretical analysis. Keywords: Portland cement, fly ash, conventional concrete, geopolymer concrete, reinforced concrete beam
MANAJEMEN KESELAMATAN DAN KESEHATAN KERJA PROYEK UJI COBA SKALA PENUH JEMBATAN CABLE STAYED UNTUK LALU LINTAS RINGAN Hardono, Setyo; Faizal, Nazib; Irawan, Rulli Ranastra
Jurnal Jalan-Jembatan Vol 26 No 1 (2009)
Publisher : Direktorat Bina Teknik Jalan dan Jembatan

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (373.361 KB)

Abstract

Bahwa terjadinya kecelakaan di tempat kerja disebabkan oleh faktor manusia dan faktor teknis. Oleh karena itu untuk mengurangi kecelakaan dan menjamin keselamatan kerja, diperlukan adanya Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3). SMK3 ini sama dengan Health, Safety, and Environment Procedure (HSE Procedure). Dalam tulisan ini dijelaskan mengenai Sistem SMK3 pada proyek Cable Stayed di Sukabumi, Jawa Barat, yang meliputi struktur organisasi, penilaian resiko kerja, alat pelindung personal, tanggap darurat, kebijakan kesehatan dan lingkungan, kebijakan medis dan kebijakan keselamatan kerja. Kata Kunci : Keselamatan, Kesehatan, Kecelakaan, kerja, risk assessment, tanggap darurat
Efek Tipe Superplasticizer terhadap Sifat Beton Segar dan Beton Keras pada Beton Geopolimer Berbasis Fly Ash (Hal. 59-70) Utami, Ria; Herbudiman, Bernardinus; Irawan, Rulli Ranastra
RekaRacana: Jurnal Teknil Sipil Vol 3, No 1: Maret 2017
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (799.469 KB) | DOI: 10.26760/rekaracana.v3i1.59

Abstract

ABSTRAKBeton geopolimer adalah beton tanpa semen portland dengan bahan pengikat material yang mengandung silika dan alumunium yang tinggi seperti fly ash. Silika dan alumunium pada fly ash diaktifkan oleh aktivator yaitu sodium hidroksida (NaOH) dan katalisator yaitu sodium silikat (). fly ash yang digunakan pada penelitian adalah campuran fly ash PLTU Suralaya 1 dan PLTU Suralaya 2. Penelitian dilakukan untuk mengetahui pengaruh tipe superplasticizer terhadap beton segar dan keras beton geopolimer yaitu slump flow, setting time dan kuat tekan. Superplasticizer yang digunakan adalah naphthalene, sodium glukonat dan polycarboxylate. Benda uji kuat tekan adalah kubus berukuran 5 cm x 5 cm x 5 cm sebanyak 3 buah, pengujian dilakukan pada umur beton 1, 3, 7 dan 28 hari. Hasil dari penelitian diketahui bahwa superplasticizer sodium glukonat adalah superplasticizer terbaik untuk beton geopolimer karena beton mendapatkan flow dan setting time yang lama, dengan kuat tekan yang tidak jauh berbeda dengan beton geopolimer.Kata kunci: beton geopolimer, fly ash, superplasticizer, beton segar, beton keras ABSTRACTGeopolymer concrete is a concrete without portland cement with high component silica and aluminium as the binding material such as fly ash. Silica and aluminum in fly ash is activated by sodium hydroxide (NaOH) and sodium silicate (). fly ash used in the study was mix  two steam power plant, fly ash PLTU Suralaya 1 and PLTU Suralaya 2. The study was conducted to determine the effect of type superplasticizer on fresh concrete and hardened of geopolymer concrete which is Slump flow, setting time and compressive strength. Superplasticizer used is naphthalene, sodium gluconate and polycarboxylate. Compressive strength test specimen is a cube measuring 5 cm x 5 cm x 5 cm as much as 3 pieces, testing is done on the concrete 1, 3, 7 and 28 days. The results of the study note that sodium gluconate is the best admixture for geopolymer concrete because concrete has highest flow characteristic and longer setting time, with difference of compressive strength was not significantly.Keywords: geopolimer concrete, fly ash, superplasticizer, fresh concrete, hardened concrete
Efek Kadar Polycarboxylate Ether (PCE) terhadap Sifat Mekanik Beton Geopolimer Berbasis Fly Ash (Hal. 136-147) Putra, Eggidyo Parudhiwa; Herbudiman, Bernardinus; Irawan, Rulli Ranastra
RekaRacana: Jurnal Teknil Sipil Vol 2, No 4: Desember 2016
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (578.677 KB) | DOI: 10.26760/rekaracana.v2i4.136

Abstract

ABSTRAKPenambahan superplasticizer kedalam campuran beton geopolimer memiliki peranan penting untuk kemudahan pekerjaan. Akan tetapi, kualitas beton geopolimer tersebut harus tetap terjaga. Beton geopolimer merupakan beton tanpa semen dengan bahan pengganti semen harus berupa pengikat material yang mengandung silika dan alumunium yang tinggi seperti fly ash. Jenis fly ash yang digunakan pada penelitian yaitu fly ash Suralaya 1 dan Suralaya 2. Penelitian dilakukan untuk mengetahui pengaruh kadar superplasticizer PCE terhadap sifat mekanik beton geopolimer yaitu slump flow, nilai pantul, cepat rambat gelombang, kuat tekan, kuat tarik belah, kuat tarik lentur, dan modulus elastisitas. Kadar superplasticizer PCE yang digunakan kadar 0,5%; 1,0%; 1,5%; dan 2,0%. Hasil dari penelitian diketahui bahwa kadar superplasticizer PCE optimum adalah 0,5% sampai 1,0% untuk beton geopolimer karena beton mendapatkan flow yang paling mengalir dan mutu dari sifat mekanik beton geopolimer yang baik.Kata kunci: beton geopolimer, superplasticizer PCE, slump flow, uji destruktif, uji non-destruktif ABSTRACTThe Addition of superplasticizer into geopolimer concrete mix  has an important role to improve the workability of concrete. However, the quality of the geopolimer concrete must always be maintenad. Geopolomer concrete is a concrete without cement where it can be replaced with binder material with high silica and alumunium content such as fly ash. The variant of fly ash used in this study is fly ash Suralaya 1 and Suralaya 2. The study was conducted to determine the effect of dosage PCE superplasticizer on mechanical properties of geopolymer concrete which is slump flow, rebound number, pulse velocity, compressive strength, splitting, flexural, and modulus elasticity. Dosage of PCE superplasticizer used 0,5%; 1,0%; 1,5%; dan 2,0%. The results of the study can be conclusion that the optimum dosage is 0,5-1,0% which best flow and best mechanical properties.Keywords: geopolimer concrete, superplasticizer PCE, slump flow, destructive test, nondestructive test
Ketahanan Beton Geopolimer Berbasis Fly Ash terhadap Sulfat dan Klorida (Hal. 33-43) Ikomudin, Rafli Andaru; Herbudiman, Bernardinus; Irawan, Rulli Ranastra
RekaRacana: Jurnal Teknil Sipil Vol 2, No 4: Desember 2016
Publisher : Institut Teknologi Nasional, Bandung

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (601.625 KB) | DOI: 10.26760/rekaracana.v2i4.33

Abstract

ABSTRAKKetahanan beton dalam lingkungan yang korosif sangat diperlukan, beton geopolimer memiliki ketahanan yang lebih baik dari beton biasa. Beton geopolimer dalam penelitian ini menggunakan campuran fly ash Suralaya 1 dan Suralaya 2 sebagai material pengganti semen. Penelitian dilakukan untuk mengetahui ketahanan beton geopolimer berbasis fly ash terhadap zat kimia berupa asam sulfat (H2SO4) dan asam klorida (HCl) dengan konsentrasi sebesar 10%. Parameter yang diamati adalah kuat tekan, cepat rambat gelombang dan pH yang dilakukan pada umur beton 7, 14, 21 dan 28 hari. Benda uji kuat tekan dan pH menggunakan kubus 5 cm × 5 cm × 5 cm sebanyak 3 buah dan benda uji cepat rambat gelombang menggunakan silinder berukuran 10 cm × 20 cm. Hasil penelitian menunjukan bahwa konsentrasi larutan sebesar 10% yang digunakan untuk perendaman beton geopolimer berbasis fly ash terlalu tinggi sehingga ketahanan beton geopolimer tersebut mengalami penurunan yang signifikan baik dari segi kekuatan, kepadatan, kandungan dan kondisi fisik.Kata kunci: beton geopolimer, fly ash, kuat tekan, ketahanan ABSTRACTResistance concrete in corrosive environments is necessary, geopolymer concrete have better resistance than ordinary concrete. Geopolymer concrete in this study using mixing fly ash Suralaya 1 and Suralaya 2 as a cement replacement material. The study was conducted to determine the resistance of geopolymer concrete based on fly ash use chemicals such as sulfuric acid (H2SO4) and hydrochloric acid (HCl) at a concentration of 10%. The observed parameter is compressive strength, fast propagation and pH that was made on the concrete 7, 14 , 21 and 28 days. The test specimen compressive strength and pH using a cube of 5 cm × 5 cm × 5 cm 3 pieces and fast propagation of the test specimen using cilinder measuring 10 cm × 20 cm. The results of the study showing that the concentration of 10% were used for soaking of fly ash-based geopolymer concrete is too high so that the resistance of geopolymer concrete is experiencing a significant decline both in terms of strength, density, content and physical condition.Keywords: geopolimer concrete, fly ash, compressive strength, resistance