Garuda - Garba Rujukan Digital

All

Jurnal Teknik Industri

industri
Website

Published by Universitas Muhammadiyah Malang

ISSN : 19781431 EISSN : 25274112 DOI : -

Core Subject : Economy, Science, Engineering,

Decision Sciences, Operations Research & Management Economics, Econometrics & Finance Industrial & Manufacturing Engineering

Dr. Saiful Anwar Malang is a state hospital has done it is job and function, but in 3rd class of pavilion room, the number of patient decrease dramatically. It is concerned with quality of this hospital. To answer this problem, research was done using Quality Function Deployment (QFD). Quality Function Deployment is a tool which design some needs include customers represented as a voice of customer and including some competitions and also groups some activities that usually called affinity graphic ang getting a benchmarking for it is competition. From the result analysis can be showed that main attribute for patience is a accuracy. And from House Of Quality can be found that getting a periodic meeting to evaluate this hospital and also increase a service can be made 20 concept

Arjuna Subject : Bisnis, Menejemen, dan Akutansi (semua kategori) - Strategi dan Menejemen

Articles 13 Documents

1 2

Search results for , issue "Vol 12, No 1 (2011): Februari" : 13 Documents clear

Modifikasi Model Bauran Pemasaran Plus Terhadap Variabel Pembentuk Yang Positif Dan Signifikan Waluyo, Minto
Jurnal Teknik Industri Vol 12, No 1 (2011): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

PT. X Surabaya is a bookstore outlet that sell the book as its main business, for that company needs to make improvements and development to face the competition, to increase customer satisfaction and ultimately become loyal consumers. Variable proposed model starts from the marketing mix which is formed from the variables (product, price, youth get the product, distribution, promotion, location, diversity of products sold and services), corporate policies, consumer behavior, purchase decision, thus increasing the impact of consumer satisfaction loyal to the PT. X. The results show that modification of Marketing Mix Plus had a direct impact, positive and significant impact on its constituent variables namely Products of 0.482, Marketing Mix Plus had a direct impact, positive and significant impact on the price of its constituent variables of 0.343, Marketing Mix had Plus a direct impact, positive and significant impact on the distribution of its constituent variables 0.48, Marketing Mix Plus had a direct impact, positive and significant impact on its constituent variables namely Promotion of 0.641, Marketing Mix Plus had a direct impact, positive and significant impact on the location of its constituent variables of 0.443.

PERKEMBANGAN TEKNOLOGI DALAM INDUSTRI MEDIA Machmud, Muslimin
Jurnal Teknik Industri Vol 12, No 1 (2011): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Globalization is happening at the present time, have an impact on all aspects of human life, including how humans acquire and convey information. As the world becomes cosmopolitan, so as to create cultural uniformity that makes human communication affect each other even though the place is very far apart. One of the demands of globalization is the information accessible to the whole society. Thus, the existing media industry should be able to meet that demand. One effort that needs to be done by the media industry is to make the adjustments to the advancement of existing technology. The globalization of information that played by the media industry has put developing countries as a share of the world information society that requires the establishment of regulation and use of information technology in each country in response to developments in both regional and international levels. Activities use of information technology should be developed without compromising the rights of audience in a fair manner, so that the violations related to the use of information technology can be avoided through the application of uniform principles and rules in each country.

Persamaan Operasional Dalam Proses Laminasi Bahan Kemasan Zafriana, Lusi
Jurnal Teknik Industri Vol 12, No 1 (2011): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Plastick sheet coated like paper for food, bag packaged plastic, etc now is needed for industry. To find material it laminated, it form still in coated laminated process with plastic film. An operational equation in the laminated process need to be founded so that its laminated process can be adjusted with the assigned order. That is usually problem that is not be solved by producers. By using mass balanced principles, the equation can be founded. By using data collected, we can calculate constanta of the equation and also RPM display value that will be used to determine thick of coated film needed for the width film as ordered.

Perancangan Sasaran Mutu Lembaga Sertifikasi Personel Dengan Balance Scorecard Sumaedi, Sik; Yarmen, Medi
Jurnal Teknik Industri Vol 12, No 1 (2011): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

ISO/IEC 17024 directs Bodies Operating Certification of Person to adopt documented quality management systemÂ according to ISO 9001:2008. Bodies Operating Certification of Person that implement ISO 9001 documentation systemÂ should have quality objective. Quality objective is wished to be appropriated with institution performance indicators.Therefore, when quality objective is achieved, the institution performance is also good. The problem is quality objective inÂ ISO 9001 is generally explained. This condition pushes Bodies Operating Certification of Person to identify the appropriateÂ quality objective framework. Balance Score Card, a strategic performance measurement management framework thatÂ consist of 4 perspectives (financial, customer, internal process, learning and growth) that effectively proven could be solution for that problem. This research is to implement Balance Score Card performance management framework in Bodies Operating Certification of Personâ€™s quality objective. This research is important considering there is no previous research that implement Balance Score Card in a Bodies Operating Certification of Person. The research result shows Balance Score Card based quality objective design with totally 12 quality objectives that consist of 1 financial perspectiveâ€™s quality objective, 5 customer perspectiveâ€™s quality objectives, 3 internal process perspectiveâ€™s quality objectives, and 3 learning and growth perspectiveâ€™s quality objectives.

Perancangan Model Pengembangan Kinerja Daya Saing Klaster Industri Minyak Dan Gas Bumi Di Jawa Timur Hanoum, Syarifa; Suwignjo, Patdono; Wirjodirdjo, Budisantoso; Juwita P, Devinata
Jurnal Teknik Industri Vol 12, No 1 (2011): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Oil and gas industry is a sector that has a vital strategic role on national development. East Java is one of the provinceÂ in Java that has an enourmous potential on oil and gas and has not been optimally explored. Industrial cluster is anÂ industrial development concept that comphrehensively organize the relationship and behaviour of stakeholder in industry so that they can co-operate to increase the competitiveness of the industry. The increasing of industrial competitiveness is supported by completeness and contribution of each industry in oil and gas industial cluster in each java by identifying the behaviour of stakeholder and system in this sector which is described in stakeholder model and value chain model. In this research, lubricant industrial cluster is used as an embryo for developing oil and gas industrial cluster. The complexity of the system in terms of system behaviour will be presented in a dynamic system model, which will make it possible to identify the influence between each variables.The Porterâ€™s Diamond model is adapted to model the behaviour of the competitiveness.Â The result of this research showed that in increasing the industrial cluster competitiveness some variables are significantly influencing then the others.

Kesetimbangan Energi Termal Dan Efisiensi Transient Pengering Aliran Alami Memanfaatkan Kombinasi Dua Energi Kade Suriadi, I Gusti Agung; Ricki Murti, Made
Jurnal Teknik Industri Vol 12, No 1 (2011): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

The energy used as a dryer is usually only a single type of energy. In this case, study is conducted on the natural flowdryer system by using the chimney. This combination of energy utilization of solar energy and biomass that can be used simultaneously or one turns in accordance with the needs or circumstances. It has been tested against a dryer prototype by performing measurements on the temperature of the inlet air and exit on biomass furnace, the temperature of the inlet air and exit on the solar collector, the temperature of inlet air and exit on the drying chamber, the water content of dried material, the temperature of dried material, the surface temperature of inside and outside of wall on drying chamber, and the intensity of solar radiation. Data were collected at an interval of 30 minutes and do the processing of such data. Next made in a graphical form of thermal energy balance and system efficiency versus the time. Results obtained that: the drying time was 7.5 hours. Thermal energy balance versus the time found that the increase of energy losses lead to useful energy reduction system.

Analisa Perilaku Konsumen dan Nilai Komik Jepang Djudiyah, D
Jurnal Teknik Industri Vol 12, No 1 (2011): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

This research was aimed to analysis and described motivations and kinds of consumer values Japanese comics. The methods used in this research is quantitative research. The subject in this research is 35 students State Yunior High School in Malang, which is using incidental sampling techniques. The instrument to collect the data is questionare. The data analysis methods is quantitaive descriptive. The first result of the research are the motivating factor is social needs, egoistic needs, self actualization and safety needs. The second, the values Japanese comics is the picture and the language used in the Japanese comics are more understandable, the topic is varieties and almost the same with Indonesian culture ever it is more realistic storys and the cost is cheaper than American comics.

Adaptation Of The Variable Neighborhood Search Heuristic To Solve The Vehicle Routing Problem Imran, Arif; Okdinawati, Liane
Jurnal Teknik Industri Vol 12, No 1 (2011): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

The vehicle routing problem is investigated by using some adaptations of the variable neighborhood search (VNS).Â The initial solution was obtained by Dijkstraâ€™s algorithm based on cost network constructed by the sweep algorithm andÂ the 2-opt. Our VNS algorithm use several neighborhoods which were adapted for this problem. In addition, a number ofÂ local search methods together with a diversification procedure were used. The algorithm was then tested on the data setsÂ from the literature and it produced competitive results if compared to the solutions published.

Model Pengendalian Katodik Dalam Elektrode Disk Pemutar Sistem Korosi Utami, Isni
Jurnal Teknik Industri Vol 12, No 1 (2011): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

The effect of fluids flow rate onto necessity of current density cathodic protection which characterized using RotatingÂ disk electrode (RDE) model has been researched on an electrochemistry manner. This research was done to AISI 1018 steel as the electrode spinning cylinder-shaped inside aerated dissolvable NaCl 3.5%. using variation spinning rate 0â€“2000rpm and 25â€“75Â° C temperature. Current density cathodic protection necessity determined from the steel interface potential - 800mV with reference anode Ag/AgCl. Experiment result shows that the increasing of electrode rate, cathodic protection current density needs increased due to diffusion layer tare faction and also because corrosion potential become more positive. Higher temperature would increase cathode protection current density needs and makes corrosion potential more negative. Oxygen activation energy value to be diffused onto electrode surface support the corrodibility AISI 1018 toward temperature increment, because cathodic reaction controlled by transfer mass of dissolved oxygen.

Optimalisasi Jenis Olahan Kering dan Cara Pengolahan Akhir Ketela Harsojuwono, Bambang Admadi; Ngurah Agung, I Gusti; Pramana Mahardika, M. Surya
Jurnal Teknik Industri Vol 12, No 1 (2011): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

The research was aimed to determine the effect of the form of dry food products, and final processing of sweet potatoand their interaction, on the nutrition content, resistant starch of the products, and the increasing level of blood glucoseof mice after consuming the products. The method of the research was based on the completed random design with thefactorial experiment two factors were experimented, the first factor was the form of dry food products with four kinds of theproduct from namely: crispy, chip, cracker and snack. The second factor was final processing with two kinds of methodswere experiment was done using so nice which divided into eight blocks of combination treatments of the experiments. The crispy form of dry sweet potato product and final processed by oven roasting was the best product which could suppress the increasing level of blood glucose of mice to 8 mg/L and has resistant starch of about 39.29%. This product also had the best nutrition content such as content of protein, lipid, total sugar and starch of about 3.42%, 1.79%, 7.98%, and 50.02%.

Page 1 of 2 | Total Record : 13

1 2

Filter by Year

2011 2011

Filter By Issues

All Issue Vol. 24 No. 2 (2023): August Vol. 24 No. 1 (2023): February Vol. 23 No. 2 (2022): August Vol. 23 No. 1 (2022): February Vol. 22 No. 2 (2021): August Vol. 22 No. 1 (2021): February Vol. 21 No. 2 (2020): August Vol. 21 No. 1 (2020): February Vol 21, No 1 (2020): February Vol 20, No 2 (2019): August Vol. 20 No. 2 (2019): August Vol. 20 No. 1 (2019): February Vol 20, No 1 (2019): February Vol 19, No 2 (2018): Agustus Vol. 19 No. 2 (2018): Agustus Vol. 19 No. 1 (2018): Februari Vol 19, No 1 (2018): Februari Vol 18, No 2 (2017): Agustus Vol. 18 No. 2 (2017): Agustus Vol. 18 No. 1 (2017): Februari Vol 18, No 1 (2017): Februari Vol. 17 No. 2 (2016): Agustus Vol 17, No 2 (2016): Agustus Vol. 17 No. 1 (2016): Februari Vol 17, No 1 (2016): Februari Vol 16, No 2 (2015): Agustus Vol. 16 No. 2 (2015): Agustus Vol. 16 No. 1 (2015): Februari Vol 16, No 1 (2015): Februari Vol 15, No 2 (2014): Agustus Vol. 15 No. 2 (2014): Agustus Vol 15, No 1 (2014): Februari Vol. 15 No. 1 (2014): Februari Vol. 14 No. 2 (2013): Agustus Vol 14, No 2 (2013): Agustus Vol. 13 No. 2 (2012): Agustus Vol 13, No 2 (2012): Agustus Vol 13, No 1 (2012): Februari Vol. 13 No. 1 (2012): Februari Vol 12, No 2 (2011): Agustus Vol. 12 No. 2 (2011): Agustus Vol 12, No 1 (2011): Februari Vol. 12 No. 1 (2011): Februari Vol 11, No 2 (2010): Agustus Vol. 11 No. 2 (2010): Agustus Vol. 11 No. 1 (2010): Februari Vol 11, No 1 (2010): Februari Vol 10, No 2 (2009): Agustus Vol. 10 No. 2 (2009): Agustus Vol. 10 No. 1 (2009): Februari Vol 10, No 1 (2009): Februari Vol 9, No 2 (2008): Agustus Vol. 9 No. 2 (2008): Agustus Vol 9, No 1 (2008): Februari Vol. 9 No. 1 (2008): Februari Vol. 8 No. 2 (2007): Agustus Vol 8, No 2 (2007): Agustus Vol. 8 No. 1 (2007): Februari Vol 8, No 1 (2007): Februari Vol. 4 No. 2 (2003) Vol 4, No 2 (2003) Vol 3, No 2 (2002) Vol. 3 No. 2 (2002) Vol. 3 No. 1 (2002) Vol 3, No 1 (2002) Vol 2, No 2 (2001) Vol. 2 No. 2 (2001) Vol 2, No 1 (2001) Vol. 2 No. 1 (2001) Vol 1, No 2 (2000) Vol. 1 No. 2 (2000) Vol 1, No 1 (2000) Vol. 1 No. 1 (2000) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Sugeng Santoso

Contact Email sugeng.santoso@mercubuana.ac.id

Phone +6282132044774

Journal Mail Official ti.jurnal@umm.ac.id

Editorial Address Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location Kota malang, Jawa timur INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA