Garuda - Garba Rujukan Digital

All

Jurnal Teknik Industri

industri
Website

Published by Universitas Muhammadiyah Malang

ISSN : 19781431 EISSN : 25274112 DOI : -

Core Subject : Economy, Science, Engineering,

Decision Sciences, Operations Research & Management Economics, Econometrics & Finance Industrial & Manufacturing Engineering

Dr. Saiful Anwar Malang is a state hospital has done it is job and function, but in 3rd class of pavilion room, the number of patient decrease dramatically. It is concerned with quality of this hospital. To answer this problem, research was done using Quality Function Deployment (QFD). Quality Function Deployment is a tool which design some needs include customers represented as a voice of customer and including some competitions and also groups some activities that usually called affinity graphic ang getting a benchmarking for it is competition. From the result analysis can be showed that main attribute for patience is a accuracy. And from House Of Quality can be found that getting a periodic meeting to evaluate this hospital and also increase a service can be made 20 concept

Arjuna Subject : Bisnis, Menejemen, dan Akutansi (semua kategori) - Strategi dan Menejemen

Articles 706 Documents

1 2 3 4 5

SYNTHESIS OF NANOPARTICLE BARIUM HEX AFERRITE BY SOL GEL AUTO COMBUTIO Widyastuti, W; Yulian FF, Felly; Rochiem, Rochman; Purwaningsih, Hariyati
Jurnal Teknik Industri Vol 12, No 2 (2011): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Nanocrystalline of Barium Hexaferrite (BaFe12O19) powders have been synthesized using the sol gel auto combustion method. The ferrite precursors were obtained from aqueous mixtures of Barium nitrate and Ferric nitrate by auto combustion reaction from gel point. These precursors were sintered at different temperatures ranging from 700 to 1000oC for constant calcinations time 2,5 h in a static air atmosphere. Effects of Fe3+/Ba2+ mol ratios and sintering temperatures on the microstructure and magnetic properties were systematically studied. The powders formed were investigated using X-ray diffraction (XRD), scanning electron microscope (SEM) and VSM. The results obtained showed that the phase BaFe12O19 powders were achieved by the Fe3+/Ba2+ mole ratio from the stoichiometric value 11, 11.5 and 12 at temperature 950OC. With increasing of temperature sintering, coercivity and magnetization value tends to rising. The maximum saturation magnetization (66.16 emu/g) was achieved at the Fe3+/Ba2+ mole ratio to 11.5 and the sintering temperature 950OC. The maximum coercivity value 3542 Oe achieved at mole ratio sample 12 with sintering temperature 950OC. Maximum saturation 6616 emu/g achieved at mole ratio sample 115 with the same temperature.

PEMILIHAN SUPPLIER BAHAN BAKU PARTIKEL DENGAN METODE AHP DAN PROMETHEE Wulandari, Ratri
Jurnal Teknik Industri Vol 16, No 1 (2015): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

The problem of choosing a supplier becomes very important to do a company to be able to meet consumer demand quickly and with quality. So far, the company has not implemented the supplier selection procedures and selection criteria not yet have a supplier. The method can be completed with the supplier selection criteria is the AHP method is used to determine the weights of criteria that have been corporations and PROMETHEE method used to determine the performance of the alternative. The purpose of this research is to identify the criteria used in the selection of a supplier company and determine the weight of these criteria and get ranked supplier to obtain the best supplier. The selected criteria in the selection of the supplier company is quality with a weight of 0.19, with a weight of 0.17 delivery, performance history with a weighting of 0.06, the price with a weighting of 0.36, communication system with a weighting of 0.06, the operating control with weights of 0.05, attitudes supplier with a weighting of 0.04 and a geographical location with a weight of 0.08 where as criteria rank order supplier is UD. TL as the first rank with a net value of flow for 0.254, UD. SD as the second rank with a value of 0.144 and a net flow PT.KTI as third with a net flow value of -0.397.

EKSPATRIAT DAN INDUSTRI LINTAS NEGARA Al Musadieq, Mochammad
Jurnal Teknik Industri Vol 11, No 2 (2010): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

This research aims to describe demography characteristics and shock culture of expatriate being assigned in Malang and Surabaya. The research analysis toward 30 respondents by using table of frequency distribution resulted that majority of respondents are representative, age between 30 to 40 years old, Japanese, bachelor, male, married, have kids, accompanied by their kids, first overseas assignment, and stay in Indonesia for 1 to 2 years. Moreover the research shows that majority of respondents are able to cope with cultural differences. They do not have shock culture problems.

ANALISIS PENGUKURAN KUALITAS LAYANAN DENGAN PENDEKATAN SERVQUAL DAN TEORI ANTRIAN DI KANTOR POS Cahyanti, Helda Mia
Jurnal Teknik Industri Vol 9, No 2 (2008): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

One way to survive in competition is having ability to give satisfied to the customer satisfaction principles. On the other hand, it should have measuring service quality with servqual approach. The destination of quality measuring is know about variable be included in variable position that must concentrate here, keep the good work, low priority, and possible overkill. The variables that go to concentrate here position, the factory must try more active to improve these variables in order that it can fill the customer desire. The variables belonging to this position is variable in comfortable about air conditioner, cleaner, friendly official, free parking place, accuracy delivery, and speed in service. From these variable belonging to concentrate here position, such as variable about accuracy delivery and variable about speed in service. Because of that, we must do measuring between coming and service time with queue theory. Besides, price minimize can decrease of queue with the way to establish the number of operator. With queue theory, it can increase operator become two peoples and total of excretion price become Rp21,477.7/hours with wait time in 0.3873144 hours/pack.

ANALISA PERSEDIAAN MATERIAL PADA FIRE TUBE BOILER STOCK YANG OPTIMAL DENGAN MENGGUNAKAN MARKOV CHAIN Noorida, Titik
Jurnal Teknik Industri Vol 4, No 2 (2003)
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Controlling material stock becomes important problem that faced by the company because controlling it suppods production process continually. In applaying material is efforted in order getting cost of supplier more law as possible. PT. lndomaxine is one kind of company that produces tube involving two type are fre tube and water tube, in which the primary material is tube ard plat. In dealing rhe consumen needs, the company should give amount materials so that the production will be continually, and the consumer will satisfy. Having more suplies like that is caused by accepting fluctually needs, than causes less supplier optimumly and less in cost too. Based on fenomenon above, so in this research will mucstigate the methods that will be counted the number ofmaterial askhg. To determine the number of material needs decisionand to determine the cost of optimumly material, this research uses the Markov Chains method.

IMPLEMENTASI KONSEP A3 UNTUK MENGURANGI REJECT PROSES ASSEMBLY Soesilo, Rahman
Jurnal Teknik Industri Vol 18, No 1 (2017): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

The A3 concept is one of the Toyota tools to propose problem-solving solutions. A3 provides status reports of ongoing activities. This research applies A3 concept to solve reject problem in plastic company assembling process. The reject rate in the assembly process is 15.6%. The implementation stage of A3 concept is identification of problem, targeting, root cause, goal setting, countermeasure, implementation plan, action and follow up. The A3 concept is in line with the Plan-Do-Check-Act (PDCA) process improvement cycle. The results show that using the concept of A3 can reduce the reject Assembly effectively and precisely.

VALUE ENGINEERING DALAM PEMBANGUNAN RUSUNAWA Dita Pahang Putra, Nyoman; Mudjahidin, M
Jurnal Teknik Industri Vol 10, No 2 (2009): Agustus
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Value engineering is done to make an effort to organize systematically and applying a technique that identifies the product function that aims to meet the required function with the lowest price. Analytical Hierarchy Process method is used in the analysis phase of work plan to choices alternative that is more objective based on several variables. In the chart of the breakdown cost model, 7 items of work have the highest cost, based on the work items was found 2 items of work that have the potential to do great engineering work that is the value of the walls and ceiling. The application of the results of value engineering on the walls, recommended the bricks, concrete stiffeners, stucco 1:4, paint walls, ceramic that savings of Rp 92,578,941 or 13.6% of the total cost of initial construction. In the same way, for the ceiling work that is recommended to change the calsiboard hollow iron frame with GRC framework furing metal so that savings of Rp40, 499,036 or 17.3% and ceiling aluminum grill on the bathroom with the calsiboard furing metal frame so that savings of Rp20,226,477 or 40%. Total savings that occur: Rp7,036,167,661 ? Rp6,882,863,207 = Rp153,304,454 or 1.95% of total construction cost.

LOCATION-ALLOCATION PROBLEMS IN THE PERSPECTIVE OF SUPPLY CHAIN: APPROACHES AND APPLICATIONS Masudin, Ilyas
Jurnal Teknik Industri Vol 20, No 1 (2019): February
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

This article attempts to explore approaches and applications of the location-allocation problems in the supply chain perspective. A review has been done for articles which have relation with the approach of location-allocation problems that includes the drivers of the supply chain such as inventory, transportation, service level, and customer demand. Moreover, the application of location-allocation problems that consider supply chain drivers is also discussed. In this article, a discussion of location-allocation discussions previously investigated by researchers is done through a literature review published in several reputable journal databases. 57 journal articles successfully collected and reviewed related approaches and applications used by researchers in location-allocation problems in a supply chain perspective. Analysis of the findings of this article can be summarized that approaches of the location-allocation problem in supply chain perspective can be divided into 2 areas: the echelon of the supply chain and the drivers of the supply chain.

ANALISIS KOMPARASI BIAYA DISTRIBUSI SISTEM REORDER POINT DAN DISTRIBUTION RESOURCE PLANNING Tania, Nina
Jurnal Teknik Industri Vol 8, No 1 (2007): Februari
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Distribution method of Reorder Point is method which controlling and observing the amount of Inventory pursuant to at boundary of Reorder Point. If inventory smaller than boundary of reorder point hence require to do/conduct order. Method of Distribution Resource Planning is method which controlling and observing the amount of inventory pursuant to at stock safety. Where if inventory less than stock safety hence require to do/conduct order as according to time lead. Each;Every company will be out for always always menu request of consumer when and correct amount. For that fluency in pendistribution of product have to be majored so that require to be done/conducted by an Schedule Mains Distribution good JID as according to requirement each;every existing distribution network level. In this research of writer try to compare the expense of released distribution with method of DRP and Method of Reorder Point. Where distribution system at PT. PAI Probolinggo use Method of Reorder Point. In the reality after its it him Method distribution of DRP the expense of compared to smaller distribution of Method of Reorder Point. With applying of DRP can cost effective equal to that is equal to Rp. 1823171.4 or 14.7386369 % from expense of before using Reorder Point.

PERENCANAAN PERAWATAN MESIN DENGAN METODE MARKOV CHAIN GUNA MENURUNKAN BIAYA PERAWATAN Eartono, M.; Mas'udin, Ilyas
Jurnal Teknik Industri Vol 3, No 2 (2002)
Publisher : Department Industrial Engineering, University of Muhammadiyah Malang

Problem often faced by a fertilizer bagging machine unit is the inegularity of machinemaintenance in which the machine is operated continuously until it damages and can not beoperated any longer. It will result in relatively high down time cost.To solvet his problem we propose a machine maintenance planing based upon data acquired by using Markov Chain Method.There are four types of maintenance we propose they are:l. Maintenance planing with corrective maintenance or high level of damage condition and preventive maintenance or mediurn le vel ofdamage condition.2. Maintenancep laningw ith correctivem aintenancfeo r high and medium level of damageconditiona ndp reventivem aintenancfeo r low levelo fdamagec ondition.3. Maintenance planing with corrective maintenance or high level of damage condition andpreventive maintenance or medium and low level of damage condition4. Maintenance planing with corrective maintenance or high and medium level of damage condition.To determine the best proposal that will be selected we use analysis of preventive maintenance cost and corrective maintenance cost that will result in expected cost for eachmachine.From the four proposals one with the least expected cost is chosen that is planing with corrective maintenance for high level of damage condition and preventive maintenance formedium and low level ofdamage condition.

Page 3 of 71 | Total Record : 706

1 2 3 4 5

Filter by Year

2000 2023

Filter By Issues

All Issue Vol. 24 No. 2 (2023): August Vol. 24 No. 1 (2023): February Vol. 23 No. 2 (2022): August Vol. 23 No. 1 (2022): February Vol. 22 No. 2 (2021): August Vol. 22 No. 1 (2021): February Vol. 21 No. 2 (2020): August Vol. 21 No. 1 (2020): February Vol 21, No 1 (2020): February Vol 20, No 2 (2019): August Vol. 20 No. 2 (2019): August Vol 20, No 1 (2019): February Vol. 20 No. 1 (2019): February Vol 19, No 2 (2018): Agustus Vol. 19 No. 2 (2018): Agustus Vol. 19 No. 1 (2018): Februari Vol 19, No 1 (2018): Februari Vol 18, No 2 (2017): Agustus Vol. 18 No. 2 (2017): Agustus Vol 18, No 1 (2017): Februari Vol. 18 No. 1 (2017): Februari Vol. 17 No. 2 (2016): Agustus Vol 17, No 2 (2016): Agustus Vol. 17 No. 1 (2016): Februari Vol 17, No 1 (2016): Februari Vol 16, No 2 (2015): Agustus Vol. 16 No. 2 (2015): Agustus Vol. 16 No. 1 (2015): Februari Vol 16, No 1 (2015): Februari Vol 15, No 2 (2014): Agustus Vol. 15 No. 2 (2014): Agustus Vol. 15 No. 1 (2014): Februari Vol 15, No 1 (2014): Februari Vol. 14 No. 2 (2013): Agustus Vol 14, No 2 (2013): Agustus Vol. 13 No. 2 (2012): Agustus Vol 13, No 2 (2012): Agustus Vol 13, No 1 (2012): Februari Vol. 13 No. 1 (2012): Februari Vol 12, No 2 (2011): Agustus Vol. 12 No. 2 (2011): Agustus Vol 12, No 1 (2011): Februari Vol. 12 No. 1 (2011): Februari Vol 11, No 2 (2010): Agustus Vol. 11 No. 2 (2010): Agustus Vol. 11 No. 1 (2010): Februari Vol 11, No 1 (2010): Februari Vol 10, No 2 (2009): Agustus Vol. 10 No. 2 (2009): Agustus Vol 10, No 1 (2009): Februari Vol. 10 No. 1 (2009): Februari Vol 9, No 2 (2008): Agustus Vol. 9 No. 2 (2008): Agustus Vol. 9 No. 1 (2008): Februari Vol 9, No 1 (2008): Februari Vol. 8 No. 2 (2007): Agustus Vol 8, No 2 (2007): Agustus Vol 8, No 1 (2007): Februari Vol. 8 No. 1 (2007): Februari Vol. 4 No. 2 (2003) Vol 4, No 2 (2003) Vol. 3 No. 2 (2002) Vol 3, No 2 (2002) Vol 3, No 1 (2002) Vol. 3 No. 1 (2002) Vol 2, No 2 (2001) Vol. 2 No. 2 (2001) Vol 2, No 1 (2001) Vol. 2 No. 1 (2001) Vol 1, No 2 (2000) Vol. 1 No. 2 (2000) Vol 1, No 1 (2000) Vol. 1 No. 1 (2000) More Issue

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Home Page

OAI Link

Editorial Team

Contact

Reviewer

Google Scholar

Contact Name Sugeng Santoso

Contact Email sugeng.santoso@mercubuana.ac.id

Phone +6282132044774

Journal Mail Official ti.jurnal@umm.ac.id

Editorial Address Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location Kota malang, Jawa timur INDONESIA

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Contact Name
Sugeng Santoso

Contact Email
sugeng.santoso@mercubuana.ac.id

Phone
+6282132044774

Journal Mail Official
ti.jurnal@umm.ac.id

Editorial Address
Departement Industrial Engineering University of Muhammadiyah Malang Jl. Tlogomas No 246 Malang

Location
Kota malang,

Jawa timur

INDONESIA