Garuda - Garba Rujukan Digital

ANALISIS HASIL PENGUJIAN DAN KALIBRASI PARAMETER BLOOD PRESSURE PADA ALAT KESEHATAN BLOOD PRESSURE MONITOR Nur Hadziqoh; Yeni Pertiwi; Romi Mulyadi
Al Tamimi Kesmas: Jurnal Ilmu Kesehatan Masyarakat (Journal of Public Health Sciences) Vol 11 No 1 (2022): Al-Tamimi Kesmas: Jurnal Ilmu Kesehatan Masyarakat (Journal of Public Health Sci
Publisher : STIKes Al-Insyirah Pekanbaru

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35328/kesmas.v11i1.2178

Testing and calibration of medical devices are one of the efforts to ensure the quality of medical devices. Tests and calibrations have been carried out on the Blood Pressure Monitor (BPM) in the emergency room at one hospital. In this article, it will be explained how the stages in testing and calibrating the BPM tool are to get the results of the appropriate/unfit for the tool. It aims to provide knowledge and awareness to health workers as device users and patients on the implementation and importance of testing and calibration of medical devices. The method used is the Work Method from the Ministry of Health of the Republic of Indonesia in 2018. The test parameters consist of a physical examination test and the function of the tool as well as a Blood Pressure performance test at the systole pressure measurement points of 60, 80, 100, 120, 150, 200 mmHg and the diastole pressure point 30, 50, 65, 80, 100, and 150 mm Hg. The results of the physical examination and function tests were 100% good. The results of the blood pressure performance test 94% passed the test with the measurement uncertainty value below the tolerance threshold (± 5 mmHg). The 150 mmHg diastolic pressure measurement point has a measurement uncertainty value that exceeds the tolerance threshold so that the pressure point does not pass the test. Thus, the BPM medical device is declared suitable for use.

PELATIHAN INSPECTION PREVENTIVE MAINTENANCE ALAT SPECTROPHOTOMETER UV-VIS UNTUK TEKNISI ELEKTROMEDIS DI PROVINSI RIAU Nur Hadziqoh; Rino Ferdian Surakusumah; Abrarr Abrarr; Yeni Pertiwi; Nani Lasiyah
Jurnal Terapan Abdimas Vol 8, No 2 (2023)
Publisher : UNIVERSITAS PGRI MADIUN

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.25273/jta.v8i2.13358

Abstract. Uv-Vis Spectrophotometer is one of the instruments in the hospital located in the clinical laboratory where its management is under the responsibility of the Electromedical Technician. The medical device technology development has led to adjustments and developments in managing the Uv-Vis spectrophotometer. The purpose of this service activity is to provide Inspection Preventive Maintainance (IPM) training for Uv-Vis spectrophotometer equipment and share developments in Uv-Vis spectrophotometer technology with electromedical technicians. With this, hospitals can provide complete services to the community. The training was held on March 26, 2022, using the Zoom Meeting media and was attended by 401 participants from all over Indonesia. Participants were given a pretest and posttest to determine the level of participants abilities with this training. Before the training, the ability of the participants was 60.30% while after the training the ability of the participants was 78.55% so there was an increase in the ability of the participants by 18.25%. The average level of participant satisfaction with this training activity is 85.54%, which is in the very satisfactory category Abstrak. Spektrofotometer Uv-Vis merupakan salah satu alat di rumah sakit yang berada pada laboratorium klinik dimana pengelolaannya di bawah tanggung jawab Teknisi Elektromedis. Perkembangan teknologi alat kesehatan menyebabkan adanya penyesuaian dan perkembangan terhadap pengelolaan alat spektrofotometer Uv-Vis. Tujuan dari kegiatan pengabdian ini adalah memberikan pelatihan Inspection Preventive Maintainance (IPM) peralatan spektrofotometer Uv-Vis dan sharing perkembangan teknologi spektrofotometer Uv-Vis kepada teknisi elektromedis. Dengan hal itu, rumah sakit dapat memberikan pelayanan yang paripurna kepada masyarakat. Pelatihan dilaksanakan pada tanggal 26 maret 2022 menggunakan media Zoom Meeting dan diikuti oleh 401 peserta dari seluruh Indonesia. Peserta diberikan pretest dan postest unutk mengetahui tingkat kemampuan peserta dengan adanya pelatihan ini. Sebelum pelatihan kemampuan peserta sebesar 60,30% sedangkan setelah pelatihan kemampuan peserta sebesar 78,55% sehingga terjadi peningkatan kemampuan peserta sebesar 18,25%. Adapun rata-rata tingkat kepuasan peserta terhadap kegiatan pelatihan ini adalah 85,54% berada pada kategori sangat memuaskan.

A ANALISIS KELAYAKAN ALAT SUCTION PUMP LABORATORIUM PERAWAT STIKES AL INSYIRAH PEKANBARU Yeni Pertiwi; Nur Hadziqoh; Romi Mulyadi; Apriliani
Jurnal Ilmu Keperawatan Vol 11 No 1 (2022): Al-Asalmiya Nursing: Jurnal Ilmu Keperawatan (Journal of Nursing Sciences)
Publisher : STIKes Al-Insyirah Pekanbaru

Suction Pump is a medical device that is used to suck fluids formed by body secretions such as blood, saliva, pus, mucus and others. In addition to the hospital, this tool is also used in the nurse's laboratory as a clinical practice tool for nursing students. All medical devices must be calibrated periodically. In this study, we will discuss how to calibrate the suction pump with the aim of knowing whether the suction pump in the laboratory is suitable for use or not. The research was conducted using work methods that have been determined by the ministry of health, including physical inspection and tool functions, electrical safety and measuring tool performance with the power of calculation parameters. The results showed that the results of the physical examination and the function of the tool were 10%, electrical safety inspection was 32% and the measurement of the tool's suction power was 50% so that the overall inspection of the tool obtained a score of 92% with the status of the tool being fit for use.

PENENTUAN TINGKAT KUALITAS PELAYANAN PASIEN RAWAT JALAN PADA RSUD BASEMAH PAGAR ALAM MENGGUNAKAN METODE SERVICE QUALITY Yeni Pertiwi
Jurnal Rekayasa Sistem Informasi dan Teknologi Vol. 1 No. 2 (2023): November
Publisher : Yayasan Nuraini Ibrahim Mandiri

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.59407/jrsit.v1i2.160

RSUD Basemah Pagar Alam adalah rumah sakit yang telah memiliki sistem tetapi sistem tersebut hanya digunakan oleh pihak rumah sakit, sementara sistem untuk pasien belum ada dan pada sistem tersebut tidak terdapat sarana untuk mengukur kualitas pelayanan khususnya pada rawat jalan. Untuk menyelesaikan permasalahan tersebut maka dibuatlah Penentuan Tingkat Kualitas Pelayanan Pasien Rawat Jalan Pada RSUD Basemah Pagar Alam Menggunakan Metode Service Quality. Tujuan penelitian ini adalah untuk mengukur kualitas pelayanan rawat jalan serta menentukan pelayanan apa saja yang perlu ditingkatkan dari hasil pengukuran kualitas pelayanan di RSUD Basemah Pagar Alam. Penerapan ini dibangun dengan metode pengembangan sistem FAST dan menggunakan PHP framework CodeIgniter dan MySQL sebagai database. Kata Kunci: Service Quality, fast, framework CodeIgniter, pengukuran kualitas pelayanan

A ANALISIS KELAYAKAN ALAT SUCTION PUMP LABORATORIUM PERAWAT STIKES AL INSYIRAH PEKANBARU Yeni Pertiwi; Nur Hadziqoh; Romi Mulyadi; Apriliani
Jurnal Ilmu Keperawatan Vol 11 No 1 (2022): Al-Asalmiya Nursing: Jurnal Ilmu Keperawatan (Journal of Nursing Sciences)
Publisher : Institut Kesehatan dan Teknologi Al Insyirah

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35328/keperawatan.v11i1.2176

Suction Pump is a medical device that is used to suck fluids formed by body secretions such as blood, saliva, pus, mucus and others. In addition to the hospital, this tool is also used in the nurse's laboratory as a clinical practice tool for nursing students. All medical devices must be calibrated periodically. In this study, we will discuss how to calibrate the suction pump with the aim of knowing whether the suction pump in the laboratory is suitable for use or not. The research was conducted using work methods that have been determined by the ministry of health, including physical inspection and tool functions, electrical safety and measuring tool performance with the power of calculation parameters. The results showed that the results of the physical examination and the function of the tool were 10%, electrical safety inspection was 32% and the measurement of the tool's suction power was 50% so that the overall inspection of the tool obtained a score of 92% with the status of the tool being fit for use.

ANALISIS KEBUTUHAN DOKUMEN SISTEM MANAJEMEN MUTU LABORATORIUM KALIBRASI ALAT KESEHATAN TIPE-C BERBASIS SNI/ISO 17025:2017 Yeni Pertiwi; Kamal Mahmudi
Al Tamimi Kesmas: Jurnal Ilmu Kesehatan Masyarakat (Journal of Public Health Sciences) Vol 11 No 1 (2022): Al-Tamimi Kesmas: Jurnal Ilmu Kesehatan Masyarakat (Journal of Public Health Sci
Publisher : Institut Kesehatan dan Teknologi Al Insyirah

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35328/kesmas.v11i1.2114

The tight competition between testing and calibration laboratories in the era of the industrial revolution 4.0 requires every laboratory to have documentation of a quality management system according to standards. This is necessary so that testing and calibration laboratories are able to apply the Good Laboratory Practices so that they can achieve consistent quality of test results, prevent discrepancies and improve quality. In order to achieve an excellent medical devices testing and calibration laboratory and be able to compete both nationally and globally, it is necessary to have a laboratory management system documentation that is in accordance with standards. For this reason, this study aims to identify the need for documentation of the quality management system for medical devices testing and calibration laboratory type C in accordance with national and international standards. The research method used in this study has 4 stages. The initial stage is a literature study on identifying problems and setting goals. The second stage is literature study for data collection. The third stage is data processing which includes identification of document requirements and identification of business processes. After that, the verification of the results of the analysis of the identification of document requirements is carried out. The results of the identification of document requirements states that at least 291 documents are needed, consisting of 1 quality manual, 55 quality procedure documents, 147 quality form documents, 25 internal and external documents and 63 work instruction documents.

ANALISIS HASIL PENGUJIAN DAN KALIBRASI PARAMETER BLOOD PRESSURE PADA ALAT KESEHATAN BLOOD PRESSURE MONITOR Nur Hadziqoh; Yeni Pertiwi; Romi Mulyadi
Al Tamimi Kesmas: Jurnal Ilmu Kesehatan Masyarakat (Journal of Public Health Sciences) Vol 11 No 1 (2022): Al-Tamimi Kesmas: Jurnal Ilmu Kesehatan Masyarakat (Journal of Public Health Sci
Publisher : Institut Kesehatan dan Teknologi Al Insyirah

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.35328/kesmas.v11i1.2178

Testing and calibration of medical devices are one of the efforts to ensure the quality of medical devices. Tests and calibrations have been carried out on the Blood Pressure Monitor (BPM) in the emergency room at one hospital. In this article, it will be explained how the stages in testing and calibrating the BPM tool are to get the results of the appropriate/unfit for the tool. It aims to provide knowledge and awareness to health workers as device users and patients on the implementation and importance of testing and calibration of medical devices. The method used is the Work Method from the Ministry of Health of the Republic of Indonesia in 2018. The test parameters consist of a physical examination test and the function of the tool as well as a Blood Pressure performance test at the systole pressure measurement points of 60, 80, 100, 120, 150, 200 mmHg and the diastole pressure point 30, 50, 65, 80, 100, and 150 mm Hg. The results of the physical examination and function tests were 100% good. The results of the blood pressure performance test 94% passed the test with the measurement uncertainty value below the tolerance threshold (± 5 mmHg). The 150 mmHg diastolic pressure measurement point has a measurement uncertainty value that exceeds the tolerance threshold so that the pressure point does not pass the test. Thus, the BPM medical device is declared suitable for use.

Title

Found 17 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 17 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 17 Documents
Search