cover
Contact Name
-
Contact Email
-
Phone
-
Journal Mail Official
-
Editorial Address
-
Location
Kota bandung,
Jawa barat
INDONESIA
Padjadjaran Journal of Dentistry
ISSN : 19790201     EISSN : 25496212     DOI : -
Core Subject : Health, Science,
Padjadjaran Journal of Dentistry or known as PJD, is an English-language scientific periodicals published by the Faculty of Dentistry Universitas Padjadjaran thrice a year on every March, July and November. The submission process of manuscript is open throughout the year. All submitted manuscripts will go through the double-blind peer review and editorial review before being granted with acceptance for publication. Designed as a medium of information and scientific knowledge, Padjadjaran Journal of Dentistry publishes numerous research articles, in the area of Oral Biology, Dental Material Science and Technology, Oral and Maxillofacial Surgery, Pedodontics, Dental Public Health and Community Dentistry, Conservative Dentistry, Periodontics, Prosthodontics, Orthodontics, Oral Medicine, Dental Radiology, as well as with their development through interdisciplinary and multidisciplinary approach. Initially published as Padjadjaran Journal of Dentistry (PJD) magazine ISSN 1979-0201(print) on 2007 in form of printed issues. In 2017, the magazine had its online published version under the same with ISSN 2549-6212 (online) in accordance with the policy of LIPI. Padjadjaran Journal of Dentistry has been using Open Journal System requiring all writers to register in advance before they are allowed to upload the manuscript they write online. Afterwards, the editors, peer reviewers, and writers can monitor the manuscript processing. Several other changes are informed in the Journal History.
Arjuna Subject : -
Articles 12 Documents
Search results for , issue "Vol 31, No 2 (2019): July 2019" : 12 Documents clear
Evaluation of the basic surface roughness of an ISO-certified and non-ISO-certified slot bracket with an atomic force microscope Chrisni Oktavia Jusup; Eky Setiawan Soeria Soemantri; Endah Mardiati; Ida Ayu Evangelina
Padjadjaran Journal of Dentistry Vol 31, No 2 (2019): July 2019
Publisher : Faculty of Dentistry Universitas Padjadjaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (548.44 KB) | DOI: 10.24198/pjd.vol31no2.17956

Abstract

Introduction: The base surface roughness of slot bracket can affect friction in tooth movement. There are ISO-certified and non-ISO-certified stainless steel brackets on the market. Thus orthodontists must be careful in choosing the right bracket. This study was aimed to evaluate the differences of the surface roughness of ISO-certified and non-ISO-certified Roth 0.022 inch stainless steel bracket with the parameter of S a (average roughness). Methods: This research was a laboratory observational. Samples were taken randomly as many as 32 brackets divided into two groups, each consisted of two bracket brands. Surface roughness measurements were performed using an atomic force microscope (AFM), then the data were analysed by ANOVA test (p < 0.05) and Post-Hoc analysis. Results: The ISO-certified bracket has an S a value smaller than the non-ISO-certified bracket. There was a significant difference in the surface roughness of the ISO-certified and non-ISO-certified slot bracket base (p < 0.05). Conclusion: The ISO-certified bracket has a smoother base surface than the non-ISO-certified bracket base.Keywords: Surface roughness, stainless steel slot bracket, atomic force microscope
Preliminary study on cells viability based on toxicity effect of varnish fluoride made from Indonesian de-waxed shellac Nina Djustiana; Veni Takarini; Zulia Hasratiningsih
Padjadjaran Journal of Dentistry Vol 31, No 2 (2019): July 2019
Publisher : Faculty of Dentistry Universitas Padjadjaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (317.523 KB) | DOI: 10.24198/pjd.vol31no2.22657

Abstract

Introduction: Varnish fluoride has the ability to prevent enamel demineralization. De-waxed shellac that mostly used for fruits coating, now is applied as varnish fluoride materials. This de-waxed shellac is quite potential since the product can be found from Indonesian sources. The research aims to describe the toxicity effect of varnish fluoride made of de-waxed shellac by measuring the viability of the fibroblast cells. Methods: The research method that was used in this study is in vitro experimental method, which using the tooth that had been smeared with varnish fluoride contacted with fibroblast cells REF (Rat Embryonic Fibroblast) for 4, 8, and 24 hours. The toxicity effect of varnish fluoride was then measured by cell viability. Results The results show that the average cells viability on 4 hours contacted tooth was 88%, while average cells viability on 8 hours contacted tooth was 74%, and lastly the average cells viability on 24 hours contacted tooth was 63%. Conclusion: The conclusion of this preliminary study on cells viability based on toxicity effect of varnish fluoride made from Indonesian de-waxed shellac are different based on contacted time.Keywords: Cell viability, toxicity effect, varnish fluoride, Indonesian de-waxed shellac
Prevalence of Molar Incisors Hypomineralisation (MIH) in primary school children Yenni Hendriani Praptiwi; Natanael Dwi Prayitno; Susi Sukmasari
Padjadjaran Journal of Dentistry Vol 31, No 2 (2019): July 2019
Publisher : Faculty of Dentistry Universitas Padjadjaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (16.788 KB) | DOI: 10.24198/pjd.vol31no2.18995

Abstract

Introduction: Molar Incisor Hypomineralisation (MIH) is an enamel defect with white, yellow or black colour due to minerals insufficient during tooth development. The abnormality of prismatic enamel structures and tooth hypersensitivity on patients with MIH may disturb the success rate of restoration. The objective of this research was to determine the prevalence of MIH in primary school children. Methods: A cross-sectional study with purposive sampling on 619 primary school children at Pasteur Urban Village of Bandung City, Indonesia. All dentition were scored using the European Association of Paediatric Dentist (EAPD) MIH scoring sheet, and oral hygiene status assessment with simplified OHI. All data were descriptively described using distribution table. Results: Distribution of MIH on total of 619 children were scored as follows: 0,1,1a, 2, 2a, 3, 4, 5, 6, 7, 8, 9,10 (0 = free enamel defect; 6, 7, and 8 = alteration to non MIH; 1 -5 and 9 -10 = MIH) with frequencies 417(67.36%), 39(6.30%), 60(.65%), 13(2.10%), 0(0.00%), 7(1.13%), 0(0.00%), 4(0.65%), 0(0.00%), 26(4.20%), 58(9.36%), 0(0.00%), and 49(7.91%) respectively. Conclusion: Prevalence of children with MIH in primary school is quite high (19% (118 out of 619 participants)). The highest prevalence is found at the 11 years old group with 49 participants (36.84%), while the prevalence in boys (83 (62.4%)) is found to be higher than girls (50 (37.59%)).Keywords: Prevalence, Molar Incisor Hypomineralisation (MIH), primary school children
Inhibition of namnam (Cynometra cauliflora L.) leaves extract on the growth of Porphyromonas gingivalis Zakiyya Ulpiyah; Amandia Dewi Permana Shita; Melok Aris Wahyukundari
Padjadjaran Journal of Dentistry Vol 31, No 2 (2019): July 2019
Publisher : Faculty of Dentistry Universitas Padjadjaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (244.961 KB) | DOI: 10.24198/pjd.vol31no2.18540

Abstract

Introduction: Porphyromonas gingivalis growth should be prevented to minimise inflammation in periodontal tissues. Antibacterial herbs need to be considered because there are side effects caused by synthetic antibacterial drugs. Namnam (Cynometra cauliflora L.) leaves are known for having antibacterial effects. The purpose of this research was analysing the inhibition potential, and the highest inhibition concentration of namnam leaves extract on the growth of Porphyromonas gingivalis. Methods: 24 samples were divided into 6 groups. The positive control group was given 0.2% chlorhexidine, and the treatment group was given various concentrations (100%, 80%, 60%, 40%, and 20%) of namnam leaves extract. The disc which spilled by various concentrations of namnam leaves extracts and 0.2% chlorhexidine was placed on a medium which has been inoculated by P. gingivalis, then incubated at 37ºC for 48 hours. The inhibition zone was measured using a vernier calliper. Results: The concentration of 100% had the highest average inhibition zone value, which was 11.43 mm. The content in namnam leaves extracts which serve as antibacterial were tannins, flavonoids, triterpenoids, saponins and quinones. Conclusion: Namnam leaves extract can inhibit the growth of P. gingivalis. 100% of namnam leaves extract has the highest antibacterial inhibition zone.Keywords: Antibacterial, Namnam leaves extract, periodontal disease, Porphyromonas gingivalis
Differences of young adult smokers and non-smokers saliva reviewed by salivary pH, viscosity, and volume Dias Mareta Kusumaningrum; Sri Tjahajawati; Ervin Rizali
Padjadjaran Journal of Dentistry Vol 31, No 2 (2019): July 2019
Publisher : Faculty of Dentistry Universitas Padjadjaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24198/pjd.vol31no2.22863

Abstract

Introduction: Salivary pH, viscosity and volume play an important role in maintaining tooth and oral tissue integrity. The purpose of this research was to evaluate the difference of young adult smokers and non-smokers saliva reviewed by its pH, viscosity and volume. Methods: The research sample of 28 smokers and 24 non-smokers. Saliva was collected by spitting method then the pH, viscosity and volume was measured. The data was analyze using independent sample t-test and chi-square. Results: The result indicated that there was a significant difference in the mean value of salivary pH on smokers and non-smokers with p-value 0.000 (p < 0.05). There was a significant difference in the mean value of salivary viscosity on smokers and non-smokers with p-value 0.000 (p < 0.05.) There was a significant difference in the mean value of salivary volume on smokers and non-smokers with p-value 0.000 (p < 0.05). Conclusion: The conclusion of the research showed that salivary pH of smokers was lower than non-smokers, salivary viscosity of smokers was higher than non-smokers and salivary volume of smokers was fewer than non-smokers.Keywords: Young adult, smokers, non-smokers, saliva, salivary pH, salivary viscosity, salivary volume
Modification of surface hydrophilicity of dental materials by ozone Ira Artilia
Padjadjaran Journal of Dentistry Vol 31, No 2 (2019): July 2019
Publisher : Faculty of Dentistry Universitas Padjadjaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (379.715 KB) | DOI: 10.24198/pjd.vol31no2.15362

Abstract

Introduction: Gypsum, Portland, and apatite cement, and gypsum have been developed as dental materials for a long time. Similarity of the three materials leads to some relevant approaches to improve the characteristic of dental materials. Water reducing agent is commonly used in detergent or soap and also used as a conventional method in the cement industry to increase the handling and mechanical property. Cement paste mixed with water reducing agent is more flowable (ease handling), and the set mass is harder (mechanical property increased). However, it has a problem with biomaterial cement due to the biocompatibility. This water reducing agent is harmful to living tissue. Therefore, a new approach will be demonstrated in this research. Methods: In this study, the hydrophilicity of cement powder was modified by ozone gas treatment. Ozone gas treatment will be applied to modify the hydrophilicity of cement particles; therefore, it can act similar to the water reducing agent. Results: The hydrophilicity of gypsum, Portland, and apatite cement powder was significantly increased after ozone gas treatment. The hydrophilicity improvement of cement powder increased the ability of water to interact with the cement powder. The benefit is the flowability improvement of cement paste. Therefore, the manipulation index would also be increased. The mechanical property would be increased because the water added for manipulation was decreasing. Conclusion: Ozone gas treatment could improve the hydrophilicity of gypsum, Portland, and apatite cement powder.Keywords: Gypsum, Portland, apatite cement, hydrophilic, ozone
Silica coating application on heat-cured acrylic resin plates towards the surface hardness and the amount of residual monomers Rosa Sharon Suhono; Endang Wahyuningtyas; Titik Ismiyati
Padjadjaran Journal of Dentistry Vol 31, No 2 (2019): July 2019
Publisher : Faculty of Dentistry Universitas Padjadjaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (345.268 KB) | DOI: 10.24198/pjd.vol31no2.19310

Abstract

Introduction: Silica has been used as a coating material on acrylic resin denture plates to reduce the attachment of C. albicans, and acrylic resin denture coating application has been shown to increase the resistance. Acrylic resin as denture plate has many advantages, including good aesthetical aspect, easy to be manipulated, and relatively low costs. Acrylic resin also has disadvantages, namely the presence of residual monomers, low abrasion resistance, and broken easily. Residual monomers have poor biocompatibility and can weaken the mechanical strength of acrylic resin dentures. The purpose of this study was to analyse the silica coating application on heat-cured acrylic resin plates towards the surface hardness and the amount of residual monomers. Methods: This study used as much as 40 rod-shaped heat-cured acrylic resin specimens measured 13 x 13 x 2 mm. Specimens were divided into 2 groups (n = 20), namely the control group and the acrylic resin plate group applied with silica coating. Specimens in the treatment group applied with silica coating material using the dip-coating method. The surface hardness was tested using the Vickers hardness tester, and the amount of residual monomers was tested using gas chromatography. All data were analysed using an independent t-test. Results: Surface hardness in the group applied with silica coating was significantly higher than the control group (p < 0.05), while the remaining monomers of acrylic resin plate specimens in the group applied with silica coating were significantly lower than the control group (p < 0.05). Conclusion: Silica coating increases the surface hardness and decreases the amount of residual monomer of heat-cured acrylic resin.Keywords: Silica coating, surface hardness, residual monomer, acrylic resin
Immunoexpression of Ki-67 in determining prognosis of oral cavity squamous cell carcinoma Silvi Kintawati; Hening Tjaturina Pramesti
Padjadjaran Journal of Dentistry Vol 31, No 2 (2019): July 2019
Publisher : Faculty of Dentistry Universitas Padjadjaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.24198/pjd.vol31no2.22888

Abstract

Introduction: Several researchers have been stated that the right prognosis of oral squamous cell carcinoma (OSCC) can be achieved through assessment of tumor clinical staging and tumor histopathological grading as well. The use of biomarker in histopathological grading is obviously helpful to ensure the prognosis. Objective of this study was to determine the correlation between expression of Ki-67 and histopathological grading of OSCC. Methods: A retrospective study was conducted by assessing 20 cases of paraffin-embedded OSCC derived from the Department of Pathology Anatomy of Hasan Sadikin Hospital Bandung in 2013. The OSCC performing was stained by hematoxylin-eosin. While, antibodies Ki-67 was used in immunohistochemistry reaction to determine the relation of expression of Ki-67 with histopathologic grade of OSCC for predicting a prognosis. Results: The result show that distribution of Ki-67 expression were vary from 20% to 80% in each case. Ki-67 intensity was also distributed from weak, moderate and strong. Conclusion: There is a significant correlation between Ki-67 immunoexpression and the histopathological grading of squamous cell carcinoma (p < 0.01), thus, Ki-67 can be used to predict a prognosis.Keywords: Immunoexpression, Ki-67, prognosis, oral cavity squamous cell carcinoma
Discolouration of polyamide microcrystalline denture base plates after exposure to filter cigarette smoke Eri Hendra Jubhari; Zulkarnain Wahid Dangkeng; Effendy Dangkeng
Padjadjaran Journal of Dentistry Vol 31, No 2 (2019): July 2019
Publisher : Faculty of Dentistry Universitas Padjadjaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (188.324 KB) | DOI: 10.24198/pjd.vol31no2.15531

Abstract

Introduction: Denture users with smoking habit often complain about colour changes in their dentures, especially on the base part. Polyamide microcrystalline is a thermoplastic denture base material and does not undergo many colour changes. The purpose of this study was to analyse the effect of filter cigarettes smoke exposure on the colour of polyamide microcrystalline materials. Methods: This study used posttest only control group design — Plate-Shaped sample with a size of 2 x 2 x 0.5 cm3. Nine samples as controls were immersed without exposure to the cigarette smoke, and 9 samples were immersed in artificial saliva with exposure to the filter cigarette smoke by six cycles, where one cycle was in the form of smoke exposure from one cigarette at 30-minute intervals. Cigarette exposure lasts for 21 days using a smoking simulation tool. Every seven days of exposure, colours were evaluated using a DSLR camera. The photos were then analysed with Adobe™ Photoshop in the CIELab colour space. The results were analysed afterwards by a one-way ANOVA variant test, and advance difference tests were analysed using a Post-Hoc test. Results: There was a significant colour change after exposure (p < 0.05), but the control group did not experience discolouration. The highest rate of colour change occurred in the second week, while in the third week the colour changes still occurred but tend to be stable. Conclusion: Exposure to the filter cigarette smoke changes the colour of polyamide microcrystalline denture base.Keywords: Polyamide microcrystalline, filter cigarette smoke, discolouration, denture base
Number of tooth loss in smokers and non-smokers in Monmata Lhoong Village, Aceh Besar District, Indonesia Liana Rahmayani; Dewi Saputri; Chairunas Chairunas; Syahrial Syahrial; Maisura Maisura
Padjadjaran Journal of Dentistry Vol 31, No 2 (2019): July 2019
Publisher : Faculty of Dentistry Universitas Padjadjaran

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (219.667 KB) | DOI: 10.24198/pjd.vol31no2.19342

Abstract

Introduction: Tooth loss is a condition that occurs in most of the world's population. The most common causes of tooth loss are caries and periodontal disease. Periodontal disease can usually increase or getting worse by bad habits such as smoking. Smoking accelerates the course of periodontal disease and decreases salivary secretion, whereby increased the risk of caries incidence. Some components of the cigarette’s smoke that can accelerate the course of periodontal diseases are nicotine and tar. The purpose of this study was to determine the difference in the number of tooth loss in smokers and non-smokers. Methods: This study was a cross-sectional study. The sampling method was by the tables of Isaac and Michael, involving 78 smokers and 78 non-smokers in the village of Monmata Lhoong District. Results: Analysis was performed using the Mann-Whitney test. The result showed a significant difference between tooth loss in smokers and non-smokers (p < 0.05). Conclusion: The average value of tooth loss number in smokers is higher (96.47) than the non-smokers (60.53).Keywords: Tooth loss, cigarette, periodontal disease, nicotine, smoker, non-smoker

Page 1 of 2 | Total Record : 12


Filter by Year

2019 2019


Filter By Issues
All Issue Vol 36, No 2 (2024): July 2024 Vol 36, No 1 (2024): March 2024 Vol 35, No 3 (2023): November 2023 Vol 35, No 2 (2023): July 2023 Vol 35, No 1 (2023): March 2023 Vol 34, No 3 (2022): November 2022 Vol 34, No 2 (2022): July Vol 34, No 1 (2022): March Vol 33, No 2 (2021): July 2021 Vol 33, No 1 (2021): March 2021 Vol 33, No 3 (2021): November Vol 32, No 3 (2020): November 2020 Vol 32, No 2 (2020): July 2020 Vol 32, No 1 (2020): March 2020 Vol 31, No 3 (2019): November 2019 Vol 31, No 2 (2019): July 2019 Vol 31, No 1 (2019): March 2019 Vol 30, No 3 (2018): November 2018 Vol 30, No 2 (2018): July 2018 Vol 30, No 1 (2018): March 2018 Vol 30, No 2 (2018): July Vol 30, No 1 (2018): March Vol 29, No 3 (2017): November 2017 Vol 29, No 2 (2017): July 2017 Vol 29, No 1 (2017): March 2017 Vol 29, No 3 (2017): November Vol 29, No 2 (2017): July Vol 29, No 1 (2017): March Vol 28, No 3 (2016): November 2016 Vol 28, No 2 (2016): July 2016 Vol 28, No 1 (2016): March 2016 Vol 28, No 3 (2016): November Vol 28, No 2 (2016): July Vol 28, No 1 (2016): March Vol 27, No 3 (2015): November 2015 Vol 27, No 2 (2015): July 2015 Vol 27, No 1 (2015): March 2015 Vol 27, No 3 (2015): November Vol 26, No 3 (2014): November 2014 Vol 26, No 2 (2014): July 2014 Vol 26, No 1 (2014): March 2014 Vol 26, No 3 (2014): November Vol 25, No 3 (2013): November 2013 Vol 25, No 2 (2013): July 2013 Vol 25, No 1 (2013): March 2013 Vol 25, No 3 (2013): November Vol 25, No 2 (2013): July Vol 25, No 1 (2013): March Vol 24, No 3 (2012): November 2012 Vol 24, No 2 (2012): July 2012 Vol 24, No 1 (2012): March 2012 Vol 24, No 1 (2012): March Vol 23, No 3 (2011): November 2011 Vol 23, No 2 (2011): July 2011 Vol 23, No 1 (2011): March 2011 Vol 23, No 3 (2011): November Vol 23, No 2 (2011): July Vol 23, No 1 (2011): March Vol 22, No 3 (2010): November 2010 Vol 22, No 2 (2010): July 2010 Vol 22, No 1 (2010): March 2010 Vol 22, No 3 (2010): November Vol 22, No 2 (2010): July Vol 22, No 1 (2010): March Vol 21, No 3 (2009): November 2009 Vol 21, No 2 (2009): July 2009 Vol 21, No 1 (2009): March 2009 Vol 21, No 3 (2009): November Vol 21, No 2 (2009): July Vol 21, No 1 (2009): March Vol 20, No 3 (2008): November 2008 Vol 20, No 2 (2008): July 2008 Vol 20, No 1 (2008): March 2008 Vol 20, No 3 (2008): November Vol 20, No 2 (2008): July Vol 20, No 1 (2008): March Vol 19, No 3 (2007): November 2007 Vol 19, No 2 (2007): July 2007 Vol 19, No 1 (2007): March 2007 Vol 19, No 3 (2007): November Vol 19, No 2 (2007): July Vol 19, No 1 (2007): March More Issue