Garuda - Garba Rujukan Digital

Peningkatan Sifat Papan Partikel Sengon dengan Perlakuan Perendaman Air Dingin (Improvement the Propoerties of Particleboard Made from Sengon with Cold Water Immersion Treatment) Marwanto, Marwanto; Maulana, Sena; Maulana, Mohammad I; Wistara, Nyoman J; Nikmatin, Siti; Febrianto, Fauzi
Jurnal Ilmu dan Teknologi Kayu Tropis Vol 16, No 2 (2018): Jurnal Ilmu dan Teknologi Kayu Tropis
Publisher : Jurnal Ilmu dan Teknologi Kayu Tropis

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (38.454 KB)

The objectives of this research is to evaluate the physical and mechanical properties of particle board made from sengon and mangium woods treated with cold water immersion. Particles of sengon and mangium immersed in cold water for 24 hours. The particles of sengon and mangium are combined with a ratio of 100: 0; 0: 100; 75:25; and 50:50. Particle boards are made in size (30x30x0,9) cm3 with target densities of 0.7 g cm-3. The particle board was binded with methylene diphenyl diisocyanate (MDI) adhesive at 10% content and hot press at 140 °C with 25 kgf cm-2 for 7 minutes. The physical and mechanical properties of particle board are evaluated according to JIS A 5908-2003 standard. The physical and mechanical properties of particle board were much affected by particle combination and cold water immersion treatment. The physical (i.e density, moisture content, water absorption (WA), and thickness swelling (TS)) and mechanical properties (ie. modulus of elasticity (MOE), modulus of rupture (MOR), and internal bonding (IB)) were evaluated. The results showed that cold water immersion improved dimensional stability (WA and TS) of particle board obtained. However, some mechanical properties decreased.Keyword: cold water immersion, mangium, particleboard, sengon

Perubahan Kadar Komponen Kimia pada Tiga Jenis Bambu Akibat Proses Steam dan Pembilasan (Chemical Components Changed in Three Bamboo Species Treated by Steaming and Washing Processes) Murda, Rio A; Nawawi, Deded S; Maulana, Sena; Maulana, Muhammad I; Park, Se-Hwi; Febrianto, Fauzi
Jurnal Ilmu dan Teknologi Kayu Tropis Vol 16, No 2 (2018): Jurnal Ilmu dan Teknologi Kayu Tropis
Publisher : Jurnal Ilmu dan Teknologi Kayu Tropis

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (38.454 KB)

Bamboo has good prospects for composite raw materials such as for Oriented Strand Board (OSB) product. Previous research has shown that steam and rinsing with water and 1% NaOH solution treatments of strand improved the properties of OSB, which might be caused by changing in the chemical components content of bamboo. This study aimed to determine the chemical components content change of sembilang bamboo (Dendrocalamus giganteus Munro), black bamboo (Gigantochloa nigrocillata Kurz.), and tali bamboo (G. apus (Bl.ex Schult.f.)) due to steam and rinsing treatment. The chemical components of bamboo were analyzed referring to the Technical Association of the Pulp and Paper Industry standards (TAPPI). The results showed that the most significant changes in the chemical components content of bamboo occured for holocellulose, hemicellulose, extractive contents, and pH values. The decreasing of hemicellulose, extractive contents, and increasing pH values due to the steam and 1% NaOH rinsing treatment may improve the adhesion quality of OSB.Keywords: bamboo, chemical components, steam modification, strand,

Natural Durability of Five Bamboo Species Against Termites and Powder Post Beetle Fauzi Febrianto; Adiyantara Gumilang; Sena Maulana; Imam busyra; Agustina Purwaningsih
Jurnal Ilmu dan Teknologi Kayu Tropis Vol 12, No 2 (2014): Jurnal Ilmu dan Teknologi Kayu Tropis
Publisher : Masyarakat Peneliti Kayu Indonesia

Bamboo is multipurpose plant and is traditionally used by Indonesian rural community to substitute wood for housing material. Bamboo is susceptible to termite and powder post beetle. Consequently, bamboo and its derivative products have relatively short service life. Most available information regarding the natural durability of bamboo in Indonesia was acquired based on various different methods and are less accurate. The present research was aimed to analyze the natural durability of ampel bamboo (Bambusa vulgaris Schrad. Ex Wendl), betung bamboo (Dendrocalum asper), andong bamboo (Gigantochloa verticillata), hitam bamboo (Gigantochloa atroviolaceae) and tali bamboo (Gigantochloa apus)) against subterranean termite (Coptotermes curvignathus), dry wood termite (Cryptotermes cynocephalus), and powder post beetle (Anobium sp) referring to SNI 01.7207-2006. The results showed that bamboo species determined its natural durability against C. curvignathus, C. cynocephalus and Anobium sp. Natural durability of tali bamboo, betung bamboo, and hitam bamboo against C. curvignathus belonged to the 2nd class (resistant), while andong bamboo and ampel bamboo belonged to the 4th class (poor). Natural durability of non-barked hitam bamboo, and andong bamboo against C. cynocephalus belonged to the 3rd class (medium), while those of tali bamboo, betung bamboo, and ampel bamboo belonged to the 4th class (poor). Natural durability of all barked bamboos species against C. cynocephalus were categorized to the 4th class (poor). The resistance of ampel bamboo and andong bamboo against Anobium sp were lower compared to those of tali bamboo, hitam bamboo, and betung bamboo.Keywords: bamboo, dry wood termite, natural durability, powder post beetle, subterranean termite

Papan Partikel Berperekat Likuida Tandan Kosong Sawit Difortifikasi dengan Fenol Formaldehida (Particleboard Bonded with Phenol Formaldehyde-Fortified Oil Palm Empty Fruit Bunch Liquid ) Adesna Fatrawana; Surdiding Ruhendi; Sena Maulana; Deded S Nawawi; Fauzi Febrianto
Jurnal Ilmu dan Teknologi Kayu Tropis Vol 14, No 1 (2016): Jurnal Ilmu dan Teknologi Kayu Tropis
Publisher : Masyarakat Peneliti Kayu Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51850/jitkt.v14i1.353

Lignocellulosic waste from oil palm industry is a potential versatile resource. It can be used as raw material of bio-composite, pulp and paper, bioenergy, and many chemicals products. The aimed of this research was to investigate the characteristics of particleboard from oil palm empty fruit bunch (EFB) bonded with phenol formaldehyde (PF)-fortified oil palm EFB liquid adhesive. Fortification level of EFB liquid was varied at 5, 10, and 15%. The adhesive level of 10, 15, and 20% were used for particleboard manufactures with target density of 0.7 g cm-3. The particleboard quality was evaluated based on its physical (density, moisture content, thickness swelling) and mechanical properties (modulus of elasticity, modulus of rupture, internal bonding, and screw holding resistant) according to JIS standard. In order to improve bonding quality, the EFB particles was treated by hot water at 100 oC for 6 h. The results showed that the quality of particleboard increased by addition of fortifier as well as adhesive level, except for thickness swelling. The best particleboard properties was produced with 20% adhesive level and 15% fortifier, however, physical and mechanical properties of most particleboard produced did not satisfy the JIS A 5908:2003 requirement.Keywords: empty fruit bunch, fortifier, liquid adhesive, oil palm, particleboard, phenol formaldehyde

Pengaruh Modifikasi Steam dan Pembilasan NaOH terhadap Keasaman Enam Jenis Bambu Muhammad I. Maulana; Marwanto Marwanto; Sena Maulana; Aginsa T. Putri; Nicken O Putri; Denni Prasetia; Deded S. Nawawi; Siti Nikmatin; Fauzi Febrianto; Nam-Hun Kim
Jurnal Ilmu dan Teknologi Kayu Tropis Vol 18, No 1 (2020): Jurnal Ilmu dan Teknologi Kayu Tropis
Publisher : Masyarakat Peneliti Kayu Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51850/jitkt.v18i1.540

Perlakuan steam dan bilas NaOH 1% telah diketahui meningkatkan sifat fisis dan mekanis Oriented Strand Board (OSB) bambu. Peningkatan tersebut disebabkan oleh menurunnya kadar zat ekstraktif dan komponen berbobot molekul rendah lainnya pada bambu. Selain itu, steam dan bilas NaOH 1% juga diduga mempengaruhi keasaman bambu. Penelitian ini bertujuan untuk menentukan perubahan keasaman yang terjadi akibat perlakuan steam dan bilas NaOH 1% pada enam jenis bambu Indonesia. Enam jenis bambu meliputi bambu andong, betung, tali, ampel, kuning, dan hitam digunakan pada penelitian ini. Sampel bambu dicacah hingga berbentuk partikel dan diberikan dua perlakuan berbeda yaitu steam dan steam + bilas NaOH 1%. Partikel bambu kemudian digiling hingga didapatkan serbuk berukuran 40-60 mesh. Serbuk bambu diekstrak dengan air panas selama 1 jam. Nilai pH filtrat ekstrak diukur menggunakan pH meter. Ekstrak kemudian dititrasi dengan larutan H2SO4 0,025 N hingga pH 4 dan larutan NaOH 0,025 N hingga pH 10. Jumlah larutan penyangga yang ditambahkan ke dalam ekstrak dinyatakan sebagai kapasitas penyangga asam dan basa. Hasil penelitian menunjukkan bahwa jenis bambu dan perlakuan berpengaruh terhadap nilai pH dan kapasitas penyangga. Nilai rata-rata pH enam jenis bambu berkisar 5,20-6,67 dan meningkat setelah perlakuan steam dan Steam + bilas NaOH 1% berturut-turut menjadi 5,97-6,78 dan 7,02-7,63. Kapasitas penyangga asam dan basa enam jenis bambu masing-masing berkisar 0.404-0.525 mmeq dan 0.095-0.1750 mmeq dan meningkat setelah perlakuan steam dan Steam + bilas NaOH 1%.

Pengaruh Perlakuan Steam pada Strand dan Shelling Ratio terhadap Sifat Fisis dan Mekanis Oriented Strand Board Bambu (Effect of Steam Treatment on Strand and Shelling Ratio on the Physical and Mechanical Properties of Bamboo Oriented Strand Board) Sena Maulana; Byantara D Purusatama; Nyoman J Wistara; Ihak Sumardi; Fauzi Febrianto
Jurnal Ilmu dan Teknologi Kayu Tropis Vol 14, No 2 (2016): Jurnal Ilmu dan Teknologi Kayu Tropis
Publisher : Masyarakat Peneliti Kayu Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51850/jitkt.v14i2.206

The objective of this study was to evaluate the physical and mechanical properties of bamboo oriented strand board (OSB) from andong (Gigantochloa pseudoarundinacea) with steam treatment on strand at various shelling ratios. Strands were steam-treated at 126 ºC for 1 h under 0.14 MPa pressure. Three-layer OBSB with the core layer perpendicular to the surface at various shelling ratio (15/70/15, 20/60/20, 25/50/25, 30/40/30) was formed and bonded with 8% of phenol formaldehyde resin. Wax was added amount of 1% based on oven dry strand. The evaluation of physical and mechanical properties of the boards was conducted in accordance to the JIS A 5908:2003 standard. Steam treatment tended to increase the dimensional stability and mechanical properties of OBSB from andong. The higher shelling ratio increased the parallel flexural properties, but decreased the perpendicular flexural properties.

Perubahan Kadar Komponen Kimia Bambu Andong akibat Perlakuan Steam (Change of Chemical Components Content in Andong Bamboo due to Steam Treatment) Muhammad I Maulana; Deded S Nawawi; Nyoman J Wistara; Rita K Sari; Siti Nikmatin; Sena Maulana; Se-Hwi Park; Fauzi Febrianto
Jurnal Ilmu dan Teknologi Kayu Tropis Vol 16, No 1 (2018): Jurnal Ilmu dan Teknologi Kayu Tropis
Publisher : Masyarakat Peneliti Kayu Indonesia

Steam and rinsing treatment with water and 1% NaOH solution of andong bamboo strands have been known to improve physical and mechanical properties of its oriented strand board (OSB). The improvement of bamboo OSB properties might be caused by the change of chemical components content during steam and rinsing process. This study aims to measure the changes of chemical components content in andong bamboo (Gigantochloa pseudoarundinacea) due to steam treatment and rinsing with water or sodium hydroxide solution. Samples was taken from andong bamboo stem without bark and node part. The treatments of samples were steam at 126 ° C for 1 hour, steam and rinsing with water, and, steam and rinsing with 1% NaOH, respectively. Air-dried samples were, then, subjected to mill in order to get 40-60 mesh particles size, which was used for chemical components analyses. The results showed that steam and rinsing with water or 1% NaOH solution treatment reduced hemicellulose and extractive contents (dissolved in cold water, hot water, ethanol-benzene and NaOH 1% solution), whereas alpha-cellulose and lignin were relatively stable. Steam and rinsing treatment generally increased the pH value of bamboo samples.

Ketahanan Oriented Strand Board Bambu Betung dengan Perlakuan Steam pada Strand terhadap Cuaca (Durability of Oriented Strand Board Prepared from Steam -treated Betung Bamboo to Natural Weathering) Sena Maulana; Muhammad QA Damanik; Marwanto Marwanto; Muhammad I Maulana; Adesna Fatrawana; Ihak Sumardi; Nyoman J Wistara; Fauzi Febrianto
Jurnal Ilmu dan Teknologi Kayu Tropis Vol 17, No 1 (2019): Jurnal Ilmu dan Teknologi Kayu Tropis
Publisher : Masyarakat Peneliti Kayu Indonesia

Penelitian ini bertujuan untuk mengevaluasi ketahanan oriented strand board (OSB) dari bambu betung (Dendrocalamus asper) (BOSB) dengan perlakuan steam pada strand terhadap cuaca. Strand diberi perlakuan steam pada suhu 126 ºC di bawah tekanan 0,14 MPa selama 1 jam. Tiga lapis BOSB dibuat dengan kerapatan target 0,7 g cm-3 yang direkat dengan perekat fenol formaldehida (PF) dengan konsentrasi 8%. Parafin ditambahkan sebanyak 1% dari berat kering oven strand. Bamboo oriented strand board dipaparkan pada cuaca terbuka di Dramaga, Kabupaten Bogor Jawa Barat (6°34’15.72’’Selatan 106°44’17.30’’Timur). Evaluasi sifat fisis dan mekanis BOSB sebelum dan sesudah dipaparkan di udara selama 2 dan 3 bulan dilakukan berdasarkan standar JIS A 5908:2003. Penentuan nilai nisbah retensi MOE dan MOR dilakukan dengan membandingkan nilai MOE dan MOR sebelum dan sesudah pemaparan. Hasil penelitian menunjukkan bahwa perlakuan steam pada strand dapat meningkatkan stabilitas dimensi dan sifat mekanis BOSB. Pemaparan BOSB pada cuaca terbuka dapat menurunkan stabilitas dimensi dan kekuatan BOSB. Ketahanan BOSB dengan perlakuan steam pada strand terhadap pemaparan alami lebih tinggi dibandingkan dengan tanpa perlakuan steam.

Sifat Fisis dan Mekanis Oriented Strand Board Hibrida Bambu Pada Berbagai Shelling Ratio (Physical and Mechanical Properties of Hybrid Bamboo Oriented Strand Board at Various Shelling Ratios) Rynaldo Davinsy; Sena Maulana; Muhammad I Maulana; Elvara D Satria; Deded S Nawawi; Rita K Sari; Wahyu Hidayat; Fauzi Febrianto
Jurnal Ilmu dan Teknologi Kayu Tropis Vol 17, No 2 (2019): Jurnal Ilmu dan Teknologi Kayu Tropis
Publisher : Masyarakat Peneliti Kayu Indonesia

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.51850/jitkt.v17i2.473

Hybrid Bamboo Oriented Strand Boards (OSB) were produced to improve bamboo OSB's physical and mechanical properties. Shelling ratio adjustment of the strand type combination could determine the optimal physical and mechanical properties of hybrid bamboo oriented strand boards (OSB). The purpose of this study was to evaluate the physical and mechanical properties of hybrid betung and andong bamboos OSB at various shelling ratios. Steam modified strands of betung and andong bamboo were used as an outer layer and core layer, respectively. Hybrid bamboo OSBs were prepared with 0.7 g cm-3 target density and 8% phenol-formaldehyde resin content. Three layers of OSB were made with outer: core shelling ratios of 30:70, 40:60, 50:50, and 60:40. The physical and mechanical properties of the OSB were tested referring to the JIS A 5908-2003 standard. The targeted board density was achieved and the physical properties of all hybrid bamboo OSB have met the requirement of CSA O437.0 (Grade O-1) standard criteria. The parallel modulus of elasticity (MOE) and modulus of rupture (MOR) increased with increasing outer layer ratio. However, the perpendicular MOE and MOR decreased with increasing outer layer ratio. The internal bonding (IB) of the OSB with a shelling ratio of 30:70 and 40:60 met with the requirement of the CSA O437.0 (Grade O-1) standard.

Perubahan Kadar Komponen Kimia pada Tiga Jenis Bambu Akibat Proses Steam dan Pembilasan (Chemical Components Changed in Three Bamboo Species Treated by Steaming and Washing Processes) Rio A Murda; Deded S Nawawi; Sena Maulana; Muhammad I Maulana; Se-Hwi Park; Fauzi Febrianto
Jurnal Ilmu dan Teknologi Kayu Tropis Vol 16, No 2 (2018): Jurnal Ilmu dan Teknologi Kayu Tropis
Publisher : Masyarakat Peneliti Kayu Indonesia

Bamboo has good prospects for composite raw materials such as for Oriented Strand Board (OSB) product. Previous research has shown that steam and rinsing with water and 1% NaOH solution treatments of strand improved the properties of OSB, which might be caused by changing in the chemical components content of bamboo. This study aimed to determine the chemical components content change of sembilang bamboo (Dendrocalamus giganteus Munro), black bamboo (Gigantochloa nigrocillata Kurz.), and tali bamboo (G. apus (Bl.ex Schult.f.)) due to steam and rinsing treatment. The chemical components of bamboo were analyzed referring to the Technical Association of the Pulp and Paper Industry standards (TAPPI). The results showed that the most significant changes in the chemical components content of bamboo occured for holocellulose, hemicellulose, extractive contents, and pH values. The decreasing of hemicellulose, extractive contents, and increasing pH values due to the steam and 1% NaOH rinsing treatment may improve the adhesion quality of OSB.

Title

Found 14 Documents
Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title Search

Found 14 Documents Search

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Title

Found 14 Documents
Search