Claim Missing Document
Check
Articles

Found 28 Documents
Search

SISTEM KOMUNIKASI FIBER OPTIK DAN PEMANFAATANNYA PADA PT.SEMEN PADANG S.Kom, M.Kom, Hariyadi,
Rang Teknik Journal Vol 1, No 1 (2018): Volume 1 No 1 Januari 2018 Rang Teknik Journal
Publisher : Fakultas Teknik Universitas Muhammadiyah Sumatera Barat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (214.061 KB) | DOI: 10.31869/rtj.v1i1.614

Abstract

Pada Era Globalisasi ini, Perkembangan Ilmu Pengetahuan Dan Teknologi (IPTEK) semakin berkembang dengan pesatnya,dimana akan menuntut Sumber Daya Manusia (SDM) yang unggul dan berkwalitas, sehingga dapat melaksanakan pekerjaan perindustrian secara efektif dan efisien.Fiber optik merupakan jaringan yang dapat mentransmisi cahaya. Dibandingkan dengan jenis lainnya, ini relatif mahal. Namun, fiber optik memiliki jangkauan yang lebih jauh dari 550 meter sampai ratusan kilometer, tahan terhadap interferensi elektromagnetik dan dapat mengirim data pada kecepatan yang lebih tinggi dari jenis lainnya. Fiber optik tidak membawa sinyal elektrik, seperti lainnya yang menggunakan tembaga. Tujuan penelitian ini adalah sistem komunikasi fiber optik dan pemanfaatannya pada PT.Semen Padang. Dengan adanya pemakaian jaringan fiber optik di PT.Semen Padang, dapat mempercepat proses kerja yang berlangsung. Keywords: fiber optic, jaringan, cahaya, semen padang
Aplikasi Mikrokontroler pada Sistem Penyiram Tanaman Otomatis dengan Menggunakan Sensor Cahaya Dilengkapi dengan Buzzer dan Tampilan LCD Hariyadi, Hariyadi
Indonesian Journal of Computer Science Vol 6 No 1 (2017): April 2017 Issue
Publisher : Indonesian Journal of Computer Science

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1259.964 KB)

Abstract

Penelitian ini bertujuan untuk mengembangkan sistem penyemprotan tanaman pada rumah kaca yang terotomatisasi dengan menggunakan mikrokontroler ATMega8535. Manfaat yang diperoleh dari otomatisasi penyemprotan tanaman adalah pengurangan konsumsi waktu dalam proses penyemprotan, pengurangan kebutuhan tenaga manusia, dan peningkatan volume penyemprotan sehingga hasil panen tanaman yang disiram sesuai dengan yang diharapkan. Penelitian ini dilakukan dengan merancang, mambuat, dan mengimplementasikan komponen-komponen sistem yang meliputi: (1) mikorokontroler sebagai pengendali proses, (2) motor DC sebagai penggerak untuk membuka dan menutup atap, (3) LDR sebagai penditeksi cahaya, (4) TGS 2610 sebagai pendeteksi kelembapan udara, dan (5) sensor air untuk menditeksi air hujan.
SISTEM KOMUNIKASI FIBER OPTIK DAN PEMANFAATANNYA PADA PT.SEMEN PADANG S.Kom, M.Kom, Hariyadi,
Rang Teknik Journal Vol 1, No 1 (2018): Volume 1 No 1 Januari 2018
Publisher : Fakultas Teknik Universitas Muhammadiyah Sumatera Barat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.31869/rtj.v1i1.614

Abstract

Pada Era Globalisasi ini, Perkembangan Ilmu Pengetahuan Dan Teknologi (IPTEK) semakin berkembang dengan pesatnya,dimana akan menuntut Sumber Daya Manusia (SDM) yang unggul dan berkwalitas, sehingga dapat melaksanakan pekerjaan perindustrian secara efektif dan efisien.Fiber optik merupakan jaringan yang dapat mentransmisi cahaya. Dibandingkan dengan jenis lainnya, ini relatif mahal. Namun, fiber optik memiliki jangkauan yang lebih jauh dari 550 meter sampai ratusan kilometer, tahan terhadap interferensi elektromagnetik dan dapat mengirim data pada kecepatan yang lebih tinggi dari jenis lainnya. Fiber optik tidak membawa sinyal elektrik, seperti lainnya yang menggunakan tembaga. Tujuan penelitian ini adalah sistem komunikasi fiber optik dan pemanfaatannya pada PT.Semen Padang. Dengan adanya pemakaian jaringan fiber optik di PT.Semen Padang, dapat mempercepat proses kerja yang berlangsung. Keywords: fiber optic, jaringan, cahaya, semen padang
PERAN ORANGTUA DALAM MENGAWASI ANAK DALAM MENGAKSES MEDIA INTERNET UNTUK MEWUJUDKAN PERLINDUNGAN HAK ANAK Hariyadi, Hariyadi; Arliman S, Laurensius
Soumatera Law Review Vol 1, No 2 (2018): SOUMLAW
Publisher : Kopertis Wilayah X

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (182.341 KB) | DOI: 10.22216/soumlaw.v1i2.3716

Abstract

Children as part of citizens, they have the same rights as other citizens, which must be protected and respected by every citizen and State. Family is the first education in shaping a child's personality. The way of parenting and habits that are often done will be reflected in the child's personality. Rapid technological developments have the potential to make it difficult for people, especially children, to distinguish the real world virtual world. On this matter, this article wishes to discuss: 1) how are the conditions and behavior of children in Indonesia at this time? 2) how is the role of parents in supervising children in the use of internet media to realize the protection of children's rights, 3) and realize sustainable child protection. This study uses normative juridical research with a legislative approach. The current behavior conditions of children in Indonesia according to the latest data, at least 30 million children in Indonesia are internet users, and digital media is currently the main choice of communication channels they use, and many are misdirected in using the internet. When the use of social media and digital media is growing rapidly among young people, parental support and digital media integration in education are still lagging behind. So it's time to catch up with 9 recommendations. Sustainable child protection is the ideal of child protection laws, therefore child protection that is sustainable in accessing internet media should also be monitored.
Aplikasi Mikrokontroler pada Sistem Penyiram Tanaman Otomatis dengan Menggunakan Sensor Cahaya Dilengkapi dengan Buzzer dan Tampilan LCD Hariyadi, Hariyadi
Indonesian Journal of Computer Science Vol. 6 No. 1 (2017): April 2017
Publisher : STMIK Indonesia Padang

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (1259.964 KB) | DOI: 10.33022/ijcs.v6i1.21

Abstract

This study aims to develop a system of crop spraying in the greenhouse using a microcontroller ATMega8535 automated. The benefits of automa-tion is the reduction in consumption of spraying time on the process of spraying, reduced manpower requirements, and increase the volume of spray so that the plants are watered harvest results as expected. The research was done by design, give depth and implement components system that includes: (1) mikorokontroler as process controllers, (2) DC motor as a driving force to open and close the roof, (3) the LDR as the light detector, (4) the detector TGS 2610 air humidity, and (5) water sensors to detect rain.
PENGEMBANGAN SISTEM PAKAR BERBASIS ATURAN UNTUK MENENTUKAN MATA KULIAH YANG AKAN DIAMBIL ULANG (REMEDIAL) DENGAN METODE FORWARD CHAINING Hariyadi, Hariyadi
Jurnal Ipteks Terapan Vol 12, No 3 (2018): JIT
Publisher : LLDIKTI Wilayah X

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (2957.824 KB) | DOI: 10.22216/jit.2018.v12i3.626

Abstract

Nilai IP (Indeks Prestasi) merupakan target pencapaian mahasiswa dalam mendapatkan hasil akademik yang nantinya menentukan kepuasan mahasiswa terhadap apa yang telah dikuasai selama perkuliahan. Untuk mencapai nilai IP yang baik dan sangat memuaskan, mahasiswa harus memaksimalkan prestasi akademiknya untuk mendapatkan nilai ujian dengan hasil yang baik terhadap matakuliah yang diambil. Jika terjadi kegagalan nilai atau perbaikan nilai matakuliah maka dibutuhkan prosedur akademik yaitu remedial. Dengan Implementasi sistem pakar dalam menentukan matakuliah remedial akan membantu pihak akademik, dosen maupun pembimbing dalam memberikan kebijakan remedial yang diambil bisa dilanjutkan atau tidak. Rancangan sistem ini menggunakan metode Forward Chaining dengan implementasi sistem menggunakan sistem database Microsoft Access dan Software Development Visual Basic 6.0. Dari rancangan sistem yang dibuat maka dapat diperoleh sebuah kebijakan untuk mahasiswa maupun pertimbangan dari akademik, dosen dan pembimbing atas proses remedial yang dilakukan mahasiswa.
THE INFLUENCE OF DIFFERENCE TEMPERATURE AGAINST THE RATE OF EMBRYONIC DEVELOPMENT AND LARVAL ABNORMALITY OF CANTIK GROUPER (EPINEPHELUS SP.) Simbolon, Aprisianus Julkarman; Sutarjo, Ganjar Adhywirawan; Hariyadi, Hariyadi
xxxx-xxxx
Publisher : University of Muhammadiyah Malang

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.22219/ijota.v2i1.6858

Abstract

Cantikgrouper is the hybridization results grouper or cross-breeding between Epinephelus fuscoguttatus as a female and Epinephelus microdon as a male. The main barriers faced in the development of this commodity is still low levels of spawning up to seeding grouper. Based on the background, this study aimed to investigate optimum temperature observations against the rate of embryonic development Epinephelus sp.larvae. This study used the results of artificial spawning eggs.The fertilized eggs were incubated on six pieces of the container temperature treatment;each treatment there was repeated three times.The incubation temperature was kept on (A) 21-22°C; (B) 23-24°C; (C) 25-26°C; (D) 27-28°C; (E) 29-30°C; (F) 31-32°C. Results showed that eggswere incubated at a temperature of 21-22 ? embryonic development to a halt in the blastula, and temperature 23-24°C stalled on phasemyomere embryos. The low-temperature incubation period lasts a long time. Temperature 25-26°C needed 18 hours 6 minutes by 8.33% abnormality rate. Temperature 27-28°C needed 16 hours to hatch witha degree of abnormality of 7.6%. Temperature 29-30°C needed 15 hours 1 minute for the hatch tothe degree of abnormality of 5.33%. The 31-32°C temperature needed 14 hours 6 minutes to hatch witha degree of abnormality of 17.3%. The limits of tolerance for the incubation of the eggs ofcantik grouper (Epinephelusspp.) were 26-32°C.The best temperature of each treatment were obtained at a temperature of 29-30°C. Based on our results, it concluded that the changing temperature affected how long eggs could hatch.
PEMBUATAN PURWARUPA ALAT PENGATUR OTOMATIS PADA TANGKI AIR MENGGUNAKAN SENSOR ULTRASONIK HC – SR04 BERBASIS PLC SR3B101BD Santosa, Budi; Hariyadi, Hariyadi
Rang Teknik Journal Vol 2, No 2 (2019): Volume 2 No 2 Juni2019
Publisher : Fakultas Teknik Universitas Muhammadiyah Sumatera Barat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (361.191 KB) | DOI: 10.31869/rtj.v2i2.1379

Abstract

in the present time in the current century, almost all systems are no longer manually controlled, but automatically. The use of human labor is facilitated by tools that support almost all aspects of the work, and in this jurnal will be discussed how to create a liquid level control system automatically. Which will provide benefits for ease of doing the job. As in industry, hotels and other public facilities, which require continuous water availability to serve customers. And can be used to broaden the horizons of how a system works in real timeKeywords : tool peformance, system, automatic, control
PEMBUATAN PURWARUPA ALAT PENGATUR OTOMATIS PADA TANGKI AIR MENGGUNAKAN SENSOR ULTRASONIK HC – SR04 BERBASIS PLC SR3B101BD Santosa, Budi; Hariyadi, Hariyadi
Rang Teknik Journal Vol 2, No 2 (2019): Volume 2 No 2 Juni 2019 Rang Teknik Journal
Publisher : Fakultas Teknik Universitas Muhammadiyah Sumatera Barat

Show Abstract | Download Original | Original Source | Check in Google Scholar | Full PDF (361.191 KB) | DOI: 10.31869/rtj.v2i2.1379

Abstract

in the present time in the current century, almost all systems are no longer manually controlled, but automatically. The use of human labor is facilitated by tools that support almost all aspects of the work, and in this jurnal will be discussed how to create a liquid level control system automatically. Which will provide benefits for ease of doing the job. As in industry, hotels and other public facilities, which require continuous water availability to serve customers. And can be used to broaden the horizons of how a system works in real timeKeywords : tool peformance, system, automatic, control
RANCANGAN SISTEM KENDALI PEMANAS AIR DARI PANAS BUANG AIR CONDITIONING MENGGUNAKAN PROGRAMMABLE LOGIC CONTROLLER (PLC) M.Kom, Hariyadi,
Menara Ilmu Vol 10, No 60-65 (2016): Jurnal Edisi 2016
Publisher : LPPM Universitas Muhammadiyah Sumatera Barat

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.33559/mi.v10i60-65.661

Abstract

Manusia senantiasa menginginkan hal baru,lebih effisiendan hidup yang lebih praktis. Sebagai contoh memanfaatkan limbah dari suatu proses kerja dari suatu sistem. AC digunakan untuk mendinginkan ruangan. Di sisi yang lain AC menghasilkan panas yang harus dibuang dan hal ini dapat digunakansebagai alternatif alat pemanas air. Selain mempunyai fungsi utama sebagai pendingin ruangan, ternyata AC  juga menghasilkan  berupa panas yang dapat  dimanfaatkan untuk pemanas air. Dalam tugas akhir ini dilakukan modifikasi pada AC dengan memberikan tambahan pada kondensor berpendingin air sebagai pemanas air yang disusun secara paralel yang memanfaatkan panas yang keluar dari kondensor. Proses modifikasi pada AC  dilakukan dengan pengendalian aliran air pada kondensor menggunakan PLC.Air panas yang dihasilkan sampai suhu 450C - 60ºC sebanyak 2.000 liter/hari untuk AC yang punya kapasitas 150.000 Btu/jam atau 12,5 ton. Sehingga air jadi panas dan air ini dialirkan pada tangki dan pemakai yang dapat digunakan  setiap waktu.