This study aims to analyze defects in the sheet production process in the 301 Corrugator area by analyzing the total number of sheets produced and the number of sheets that have been damaged over a certain period of time using the Statistical Process Control (SPC) method and Failure Modes and Effect Analysis (FMEA). Based on the research results, there are 6 defects, namely untidy cuts, wrinkled sheets, uneven surface, curved sheets, uneven sides, loose sheet layers. The most dominant defect is uneven surface, which is 185.141 Kg or 60%. Based on the value of the RPN table, the product defect that has the highest value is the loose sheet layer with an RPN value of 245 from the calculation stage of the RPN value, a suggestion is made to reduce defects resulting from the loose sheet layer. From the stage of making improvements, the company should prioritize and focus on the types of disabilities and types of disabilities that have the highest RPN ranking when using the Failure Mode and Effect Analysis (FMEA) method.