Claim Missing Document
Check
Articles

Found 2 Documents
Search
Journal : International Journal of Renewable Energy Development

Optimizing the Synthesis of Lignin Derivatives from Acacia mangium to Improve the Enzymatic Hydrolysis of Kraft Pulp Sorghum Bagasse Fatriasari, Widya; Hamzah, Fajar Nur; Pratomo, Bagas Ikhasan; Fajriutami, Triyani; Ermawar, Riksfardini Annisa; Falah, Faizatul; Laksana, Raden Permana Budi; Ghozali, Muhammad; Iswanto, Apri Heri; Hermiati, Euis; Winarni, Ina
International Journal of Renewable Energy Development Vol 9, No 2 (2020): July 2020
Publisher : Center of Biomass & Renewable Energy, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/ijred.9.2.227-235

Abstract

The present study is aimed at optimizing the synthesis of Amphipilic lignin derivatives (A-LD) from the isolated lignin of A.mangium black liquor (BL), using the one and two step acid isolation method, and commercial lignin (LS) was used as comparison. The experimental design was conducted using Taguchi method, which consisted of four parameters and two level factors, with reference to the matrix orthogonal array, L8, including temperature, reaction time, amount of polyethylene glycol diglycidylethers (PEGDE) and Kraft lignin (KL). Furthermore, the kraft pulp of sweet sorghum bagasse (SSB) was used as substrate in the enzymatic hydrolysis (NREL method), with addition of A-LD, whose functional group and surface tension were then characterised using ATR-FTIR and surface tension equipment. Conversely, an improvement in the reducing sugar yield (RSY) compared to the control was observed after adding various A-LDs to the substrate during enzymatic hydrolysis. This product was more prospective for L2S than others products under milder circumstances, due to the fact that it possesses the lowest surface tension. Also, Taguchi analysis demonstrated the treatment at 60 °C for 1 h with 3.0 g and 1.0 g of PEDGE and lignin, respectively as the optimum condition, while the amount of lignin present was included as a factor with the propensity to significantly affect A-LD L1S and LS. Therefore, it was established that the A-LDs from A. mangium kraft lignin require milder synthesis conditions, compared to other existing methods and despite the differences in optimum experimental condition for L2S and LS, the functional groups in the IR spectra possessed very identical characteristics. 
Pretreatment of Oil Palm Empty Fruit Bunch (OPEFB) at Bench-Scale High Temperature-Pressure Steam Reactor for Enhancement of Enzymatic Saccharification Sari, Fahriya Puspita; Falah, Faizatul; Anita, Sita Heris; Ramadhan, Kharisma Panji; Laksana, Raden Permana Budi; Fatriasari, Widya; Hermiati, Euis
International Journal of Renewable Energy Development Vol 10, No 2 (2021): May 2021
Publisher : Center of Biomass & Renewable Energy, Diponegoro University

Show Abstract | Download Original | Original Source | Check in Google Scholar | DOI: 10.14710/ijred.2021.32343

Abstract

Upscaling of biomass pretreatment from laboratory scale to a bench-scale reactor is one of the important steps in the application of the pretreatment for pilot or commercial scale. This study reports the optimization of pretreatment conditions, namely reaction temperature and time, by one factor at a time (OFAT) method for the enhancement of enzymatic saccharification of oil palm empty fruit bunch (OPEFB). OPEFB was pretreated using high temperature-pressure steam reactor with different reaction temperatures (160, 170, 180, 190, 200 °C) and times (10, 20, 30, 40, 50 min). The effectiveness of the pretreatment was determined based on chemical compositions of raw OPEFB and OPEFB pulp and sugar production from enzymatic saccharification of the OPEFB pulp.  Solubilized components from OPEFB, such as glucose, xylose, formic acid, acetic acid, 5-hydroxymethyl furfural (HMF), and furfural in the hydrolysate that generated during steam pretreatment were also determined. Pretreatment at 180°C for 20 min provides the highest sugar yields (97.30% of glucose yield per initial cellulose and 88.86% of xylose yield per initial hemicellulose). At the optimum condition, 34.9% of lignin and 30.75% of hemicellulose are successfully removed from the OPEFB and resulted in 3.43 delignification selectivity. The relationship between severity factor and by-products generated and the sugars obtained after enzymatic saccharification are discussed. The pulp of OPEFB at the optimum condition was also characterized for its morphological characteristic by scanning electron microscopy (SEM) and crystallinity by X-ray diffractometry (XRD).  These pulp characteristics are then compared with those of the raw OPEFB. The steam pretreatment causes some fiber disruptions with more defined and opened structures and increases the crystallinity index (CrI) by 2.9% compared to the raw OPEFB.